How to install a motion sensor with a lamp. LED lamp with motion sensor

The motion sensor with a lamp is used to turn the light on or off during a certain period of time. As a rule, such devices are installed in the dark. The sensor is triggered when a moving object appears in the set zone. The trigger zone is set using a special regulating device. The motion sensor with a lamp is absolutely new and economical equipment. It also serves to improve the level of lighting not only on the streets, but also indoors.

General information

In this equipment you can use not only standard incandescent lamps, but also almost any other kind. In some cases, the motion sensor with the lamp should not be installed. For example, it is not mounted in front of the fan, since it will start to move from the motion of the blades or on the roadway, where the vehicle will pass by the stimulus. For more precise work near it, there should be no building structures, trees, engineering devices for heating and ventilation.

LED lamp with motion sensor

It is one of the most economical lighting sources. This is proved by many studies. This lamp with a motion sensor is a profitable alliance. To date, there are many devices that serve to illuminate the street or the room when a person appears. The system switches on at night and is able to control the power of lighting. LED lamps are equipped with a dimmer. This device serves to create comfort in the room. That is, energy saving is not its advantage. For operation, a significant amount of energy is required. Another thing is the combination of a lamp and a sensor.

LED lamp with motion sensor consumes much less electricity, as it turns on and off for a certain time. The main place of application are large industrial enterprises. The device is also installed in the entrances of apartment buildings, since one motion sensor can be connected to a large number of lamps. In addition, the installation of such equipment is quite simple. Many studies have proven that the use of a motion sensor with LED lamps is the best option.

Advantages and disadvantages

Among the positive sides is to allocate a lower power consumption than other lamps, as well as small overall dimensions. I must say that the power of the LED element is an order of magnitude higher than the incandescent lamps almost 7 times. Many users note the high cost of LED devices. That's why they are not very profitable to use. But this drawback is not essential.

Energy saving lamps with motion sensor

This kind of device got its name because of a competent combination of power consumption and luminous flux. Such elements are designed to save electricity. In addition, their service life is much higher than that of other lamps. They are used in large industrial enterprises, where it is necessary to achieve less electricity consumption. But this is where its scope does not end. An energy-saving lamp with a motion sensor is used to illuminate streets, entrances and other premises.

Advantages and disadvantages of energy-saving lamps

The main advantages are:

• Uniform light propagation;
• Smooth on and off;
• Various colors;
• The main part of the lamp does not heat up.

The only drawback is the failure with frequent on or off. Therefore, before using the device with the sensor, it is necessary to select the appropriate energy saving.

Connectivity

The motion sensor with a lamp is connected to a normal network, like a switch. That is, the closure of the network occurs automatically. Sometimes an additional switch is mounted in the circuit. This is done if it is necessary to ensure the inclusion of light for a certain time. The principle of operation is the parallel operation of the sensor.

If it is necessary to provide a large room with light, then several motion controllers are used. In this case, they should be on different sides of the room, but ensure the operation of all lamps. In order to avoid short-circuits, it is necessary to work from one phase. This magnetic circuit can include a magnetic switch. It serves to illuminate long streets. That is, the work of the whole street depends on one sensor.

Devices with halogen lamps

Advantages of such lamps is a great brightness of illumination with a directed movement of the light flux. They are not energy saving. The only thing you can save on is to replace them, since they are characterized by durability. Halogen elements are produced in various designs. The most popular model is a linear halogen lamp. It takes a lot of space to install it.

Typically, the installation of such devices is performed under the ceiling. They are not subjected to mechanical influences. The main area of application is the street. They can not be installed indoors, as a large amount of brightness will prevent them from doing anything.

How to connect?

Connecting a lamp with a motion sensor does not take much time and money. The devices are connected to a normal household electrical outlet with a voltage of 220 V. There are also models that operate on battery power. A serial connection diagram is indicated on the box or on the device itself. So, on the sensor there are two connection connectors - phase and zero, which are denoted by the letters L and N, respectively. The lamp itself with a lamp is led to L. To turn on the device, it is necessary to apply current to these connectors. The wires are connected to each other by terminals.

If you make a mistake in the connection, the motion sensor will not break. It simply will not function. The wire must be so long that it reaches the nearest power source. If there is no outlet nearby, then you can use the portable, while the performance of the device will not change.

Device check

Modern instruments have a special indicator. It lights up when the sensor is operating from an electrical outlet. If the indicator does not work after the voltage is applied , this indicates a breakdown of the sensor or the supply socket. There are models that begin to function after 30 seconds. During this time, you can check the serviceability of the equipment without connecting it to the mains.

Customize

The motion sensor with the lamp is regulated by means of a special toggle switch, which is located on the body. Depending on the model, there may be a different number. For ease of adjustment, the tuning marks are located near the toggle switch. As a rule, these are letter indicators. On the body there is an arrow showing the direction of rotation of the toggle switch.

This parameter, like the power of lighting, must be selected before the installation. This is done because the sensor is installed under the ceiling, and further change in the illumination indices is quite difficult. Also, a minimum light threshold should be set at which the sensor will not respond. For this answers LUX.

When plugged into an electrical outlet, all values are set to maximum to check the device. To set the motion sensor, use the Time function. It is she who is responsible for switching on and off the light. As a rule, time is set to the maximum value. On more modern models there are such functions as Sens and Mic. The first is responsible for the sensitivity and is set to maximum, the second - for voice messages (set to a minimum). Such sensors are very rare.

Reviews

Many users get tired of a Led lamp with a motion sensor. This is an excellent device that will help to illuminate not only the street path, but also various rooms. It is chosen because of the ease of installation and adjustment. As a rule, a diode lamp with a motion sensor is used to illuminate industrial plants. In addition, it significantly saves electricity.

Such devices are sold in construction stores, and their cost is in the range from 1000 to 5000 rubles. The price depends on the technical characteristics, the place of application and the type of lamps used.

Conclusion

Lamps with a motion sensor have long been included in our lives. Thanks to them, streets are illuminated in the dark, as well as most manufacturing workshops. If you use LED lamps, then energy is saved. The only drawback is the high cost. But this minus is insignificant, because in return there are a sufficient number of positive sides: easy installation, simplicity in regulation, as well as greater lighting power compared to other types.