How to choose water tanks for a bath?

Bath has appeared in human life since time immemorial. It has gained great popularity among different peoples of the world. Since the bath is primarily a means for cleaning the body with water, there is no way to do without a tank. This is an important element in this building. Use the water tanks for the bath as a container in which there is hot water. That is why it is necessary to take a responsible approach to their choice.

Rules for choosing a tank

Determined with the capacity of the tank, you should consider how many people will immediately be soared in the bath. With a large number of visitors to this facility, a tank with a corresponding capacity of at least 80 liters is required, and with a small number of about 50 liters. In each case, an individual approach is required. Tanks for water for a bath should be chosen with strong walls. The thickness accordingly depends on the capacity of this device. With a capacity of 50 liters, the average thickness is 1 cm, and at 70 - up to 1.5 cm. When choosing water tanks for a bath, one should rely on these parameters, since with thin walls the water will quickly cool down, and if too thick, the product Will have a decent weight and considerable cost. Also it is necessary to pay attention to the expected number of water inlets and outlets.

Separation by types

Tanks for water for a bath are different. They are subdivided in connection with the arrangement into three groups:

• Built-in tank. It is mounted in the furnace, where the bottom of the boiler is located at the top of the furnace. Due to this, water quickly acquires the necessary temperature. Due to the fact that the bottom of the boiler comes into contact with fire, the location of the pipe for removing smoke does not matter. Water is scooped from above by opening a special lid, or through a built-in faucet.
• The remote water tank in the bath is used if the oven is connected to it using heat exchangers. Cold water after heating in the heat exchanger enters through the nipple into the tube leading to the specified device. Thus, the tank can be located where it is most needed. Pipes in this case it is better to use metal pipes.
• The most economical is the tank fixed to the pipe. This device will minimize energy consumption. Since when the fuel burns, the temperature of the smoke coming out of the pipe is large enough, this hot water tank of the bath can heat up very quickly. This is an important property of such a product. It will be advantageous to arrange a sufficiently large tank, since in it water will acquire a high temperature quickly and evenly. The main disadvantage of this device lies in the inconvenience of filling, and with an incorrect calculation, water can even boil.

Product Material

When selecting the tank, you need to pay due attention to what it is made of.

- The best material for making a tank is stainless steel. It is resistant to corrosion, it is easy to heat up, its shape does not change even with a drop in temperature.

- Cast iron tanks also have a considerable demand. Their main difference from stainless appliances is the slow heating of water and huge weight. Cast iron tanks are also resistant to corrosion. The main advantage of this tank is long-term heat preservation.