How do they clean brass products?

Things made of metal, created by mixing copper and zinc, have an original color, resistance to wear and excellent shine. Not all landladies know how to clean a product from brass. There are many methods to improve their appearance. And it is not necessary to acquire professional means, since people's methods can cope with the problem. You just need to make sure that the product is really made of brass.

The material has a resistance to corrosion, fluidity during melting. Alloys are simple, in which copper and zinc are present, as well as special ones, because they contain a little bit of tin, iron or aluminum. To make brass wear-resistant, it is covered with protective layers. Over time, stains of oxide can appear, so objects lose attractive shine. Cleaning serves to eliminate these shortcomings.

Gels with oxalic acid

Products made of brass can be refreshed with gels, in which oxalic acid is added. Only they are not suitable for perennial contamination. Oxalic acid is part of many detergent products.

The agent should be applied to the thing and left for a few minutes. When the surface is darker, it is necessary to treat it with a brush. Then the object is sprinkled with soda, and it can be washed with water.

Oxalic acid

If the previous method is ineffective, then products from brass can be cleaned with one oxalic acid. For 1 liter of fluid should not take more than 20 g of the composition. In the finished solution it is necessary to soak the object, and then brush it.

Work is carried out in a respirator and gloves. Do not use the ingredients with acetic, citric and hydrochloric acid. They provide a quick result, but with inept handling can ruin the product.

Acetone

First, brass products are treated with a swab dipped in acetone. If positive progress is not visible, then before processing, the product must be soaked in a solution consisting of water, salt, vinegar. To get maximum effect, objects from brass boil for 3-4 hours, and if necessary, add water. The material may darken a little, but you still need to wait for more clarification.

Acid concentrates

They can be bought at hardware stores. To clean products from brass, the composition should be put on a napkin, and then you can start processing the object. The restoration of lacquered brass is faster. Yes, and it becomes soiled more slowly.

Folk methods

To clean products from brass and bronze it will turn out with use of national methods. The most popular include:

• Toothpaste. The item should be washed in water with soap, thoroughly wiping the dirt. Then you should take a toothpaste, apply it to problem areas, and you can wipe it off. Use a napkin, and a toothbrush is useful for hard-to-reach places.
• "The vinegar test." In the flour (1 glass) is added water and table vinegar (1 glass each). The finished product must be applied to the object before it dries. During this period, vinegar dissolves a thick coating, and flour absorbs dirt. It is enough to treat the object with a rag.

• Polishing with lemon juice and salt. In a plate it is necessary to squeeze out juice of half a lemon. Then, add small table salt until the paste is obtained. The composition is applied to the objects, after which they are processed in a circular motion. Remains should be washed off with water, and dry the product with dry material.
• Soap solution. With soaking in this tool, you must start any cleaning. Sometimes this work is enough. Warm water and shavings of laundry soap are added to the basin. It can be replaced with a dishwashing detergent. Objects are soaked before the liquid cools. Then the objects must be washed under clean water.
• Hot vinegar. If the products of copper and brass have stains, then remove them will help hot vinegar. The product must be heated, moistened with a cotton pad and wiped off the object. You need to work in a ventilated room, because the smell is strong.
• Sandpaper. Clogged objects should be treated with a soft sandpaper. But then you need to perform chemical cleaning of hard-to-reach areas.
• Salt and buttermilk. Buttermilk (0.5 liters) is mixed with a fine salt (1 tablespoon), after which everything must be mixed. The product is used for cleaning brass products. Then the object should be washed and dried.

The listed methods are characterized by safety, but they should not be abused. Pure brass itself has an attractive luster.

results

What will be your actions if the desired result is not obtained? If no methods are effective, then the varnish coating for secondary processing should be removed. This procedure consists of the following steps:

• The horizontal surface must be covered with a newspaper. A liquid for removing varnish and a brush should be removed from the protective layer.
• Then the polish, bought in a hardware store, is used. The product is rubbed into the product until the desired gloss is obtained. Strongly soiled areas should be treated especially carefully.
• Then the thing is varnished with a brush.
• The item must dry out.

To keep the result for a long time, dust should be removed from the brass. The products are polished, and when a small deposit appears, they perform a profile cleaning. Regular care keeps the products for a long period.

Product Features

Manufacture of brass products is performed using the method of artistic casting. This allows you to create award-winning statuettes, prizes, corporate and vip-gifts. There are firms that produce individual products.

Products made of bronze, copper, brass are symbols of luxury. Materials are combined with natural stones, which allows you to create original items. The production of brass products is also necessary for interior decoration, as beautiful decor elements are obtained. They need constant and high-quality care, and then their appearance will always be in order.

Brass in the interior

Now in the design of rooms often used items made of brass. This can be dishes, sconces, floor lamps, door hinges and latches. This alloy is used in the design of mixers and furniture. For the price of such items are cheaper in comparison with forged ones, although outwardly they look no less attractive. Brass beds made from round profiles are light.

From the metal, beautiful chairs and shelves are obtained, but the tubes are used thinner so that the product is light. Brass is used for making overlays on furniture. The material is used to create railing and racks for staircases. To make the situation more luxurious, door handles and cornices made of brass are used.

An attractive way of using the material is to place a panel in the room. They are made to order and installed in luxurious living rooms. Brass frames for mirrors and paintings look attractive. For decor, wall plates with chasing are used. The products are placed on fireplaces and in sideboards.

The material serves to make cup holders, stands for candy bars, vases. In ordinary dishes, too, can be brass handles. Using this material in the interior allows you to make the room luxurious. And simple methods of care will keep products clean.