Heaters "Plain": reviews of owners, specifications, installation by their own hands

Infrared heater "Plain" is the newest heating system developed by Russian scientists. It is presented in the form of a film, and its thickness may differ. Depending on this, its parameters may be different. As a heating element , a resistive device is used in the film. Install systems "Plain", as a rule, on the ceiling in the room and fixed with a variety of building elements of fixation.

In this situation, much depends on the thickness of the film ordered. However, there are precautions in this regard. As experts assure, at installation of elements "Plain" it is impossible to use any metal subjects, and also mirrors. If the system is installed correctly, only objects, not air, will warm. Refer elements of "Plain" to convective heating systems.

Features of systems "Plain"

First of all, we should note the high performance of the film "Plain". Given the small consumption of electricity by the system, it pays for itself in about three years. The guarantee for this product is good, and it can last about 50 years. Installation of the above system is inexpensive and should be considered. On average, experts for installation of a square. They ask the market for 1500 rubles. As is known, in the maintenance of these systems do not need. Using the control unit, you can adjust the power of the device.

Thus, in the absence of people in the house of the system there is the opportunity to expose to an economical mode. Since the brand "Plain" heaters represents those that do not heat the air, the walls do not overdry. Use the system can safely in the winter without airing. In addition, it should be noted that the emitted infrared rays prevent the appearance of mold on the walls. Thus, the room will always remain dry with a normal level of humidity. It is an average square. M. Of cloth about 1300 rubles.

Main characteristics of systems

The main characteristics of Plen systems should be attributed to performance, as well as power consumption. In addition, the buyer should take into account the level of efficiency. The limiting temperature of the heating element depends on the thickness of the web. On the surface of the heater it will be somewhat lower. This parameter can also be specified from the manufacturer. The power source of the "Plain" system is a network with a voltage of 180, 200 or 220 V. The wavelength of the radiation depends on the size of the heating element. When installing, the thickness is important, as well as the weight of the square. M. Of cloth.

Film parameters "Plan 1.2"

This film "Plain" (heating) technical characteristics has the following: power supply of the heating element - 180 V, and the current consumption is 1 A per square meter. M. The specific power of the film is 130 kW per square meter. M. As the name suggests, the thickness of the canvas is 1.2 mm. The average wavelength of the radiation is 9 μm. The minimum temperature of the heating element reaches 47 degrees. The heater voltage consumption is at the level of 200 V. The square meter of the canvas costs exactly 1500 rubles.

Feedback about this heating system

The specified system "Plain" owner reviews is good. Many buyers prefer this canvas for the fact that for a small house it fits perfectly. Energy consumption is insignificant, and this is good news. Also the film "Plain" reviews among people got good because of the high quality of the goods and the class of protection. Due to this, the canvas is fireproof. Heating of the room occurs rather quickly. Use the control unit comfortably.

How to install a canvas?

In order to qualitatively install in the house "Plain" (heating), installation by yourself should start with measurements. Before working, it is important to do the work surface. In this case, the ceiling must be very carefully cleaned. If there is paint on it, then you can use a solvent. If you used wallpaper during the repair, you need to remove everything with a spatula. Next, it is necessary to treat the surface with a primer and all to smooth out and smooth out.

After that, the length of the canvas is calculated (based on the square of the room). From the edge of the wall, the minimum indentation should be at least 2 cm. Next, prepare the fastening elements. For a cloth of this thickness, it is more appropriate to use plastic pins. In some cases, experts advise the use of hooks. However, they are more expensive fixing element, it must be taken into account. To fix the canvas a person will need an assistant.

The second sheet on the first at the edge is superimposed on top by about 3 cm. The fastening along the web should be carried out every 20 cm. It is very important not to touch the heating elements. Otherwise, the supply wires may be damaged. As a result, the integrity of the reflective film will be impaired. After that, it will be impossible to restore the dielectric coating. After fixing the system, you should take care of the control unit. In this case, much depends on its type. In general, manufacturers offer conventional devices with three modes. The unit is installed near the outlet.

To avoid short circuits, you need to know the location of the wiring in the house before fixing the box. It can be done quite simply - using a tester. Next next to the power supply is attached a special modulator "Plain". Connecting the system to the outlet is the last. The complete heating of the element in this case will leave about 40 minutes. If the heater does not work, disconnect the unit from the mains and check the integrity of the winding.

Characteristics of the film "Plan 1.4"

This film ("Plen" heating) technical characteristics has the following: the maximum voltage is 180 V, and the operating current is 3 A. As the coating, an additional layer of isolone is used. The temperature regulator in this model is installed with the marking "TU3". In turn, modulators can be used the most diverse. The wiring is in this case with PV2. The cable channels are switched on with a length of 3 meters.

To connect the heater to the network, this is quite enough. Also this system is equipped with a special magnetic starter company "Electric". The maximum load is maintained at 30 A. The efficiency of such devices reaches 80%. The peak power of the modulator is 4 kW. The consumption of the system is acceptable. The economy mode of use on the control unit is provided. In this case, about 6 kW per hour will be spent per hour of operation. It is worth square. M. Linen thickness of 1.4 mm about 1500 rubles.

What do they say about the "Plan 1.4" system?

And this system "Plain" reviews owners gets positive. Many buyers praise the 1.4 mm film for its compactness. When you install it, the room does not lose anything in size. The installation of the canvas is quite fast. If you hire skilled workers, then install the apt. M. The film costs an average of about 1400 rubles. The combustion products of the system are completely absent. Thus, the air always remains clean.

Directly heating the "Plain" -system is carried out evenly. Use the control unit is absolutely possible in all weather conditions. It is necessary to take into account the long time of temperature set-back from drawbacks. Thus, instantly it will not work out. The limiting temperature of the heating element is not very high, this should be taken into account. Despite the fact that the specified system "Plain" technical characteristics is quite good, winter time it is better to use the film with a pair of other heating devices.

Mounting Features

Using a 1.4 mm film ("Plain"), the warm floor in the house can be made independently. The canvas should be fixed on dowels. Before you start, it's important not to forget to completely clean the surface. Sq. M. Linen weighs 750 grams, so you need to fix it on the floor every 20 cm. The indentation from the wall should be made standard - 2 cm. It is better to set the cloth on the sheet based on the square of the room. The minimum distance of the flooring to fix the film is 3 cm. It is important not to use any metal objects. If the walls have mirrors, they need to be set aside for a safe distance.

The basic parameters of "Plan 1.6"

This system of "Plane" characteristics has the following: the radiation wavelength is 10 μm, and the limiting voltage is equal to 200 V. The electricity consumption is 1 A per square meter. The working frequency of the heater is around 22 Hz. The heating element in this case is resistive. Its maximum power reaches 150 watts per square meter. M. On the surface in an economical mode, the limiting temperature is 40 degrees.

The efficiency of the heater is at the level of 70%. Thus, the performance is rather high. The density of the material in the system is 7 kg per cubic meter. M. Coating in production is used lavsanovoe. The thermostat is set to the default three-channel. The electrical board at installation is used standard from the company "Salute" with a voltage of 220 V. It can withstand up to 30 A load. The modulator in the standard set is marked with РРК20.

Feedback from consumers about the canvas

This system "Plain" owners reviews are exceptionally good, many buyers purchase the above-mentioned canvas for greenhouses. The temperature in the room keeps excellent, no complaints about performance. Also, this system is often chosen for heating various cafes and restaurants. The peculiarity of this heater is that the humidity remains always normal.

Given the material thickness of 1.6 mm, the heating element is quite powerful. Consequently, the speed of heating takes little time. As the owners note, the room warms evenly and the walls are always dry. Infrared rays, in general, do not affect human health badly. Stay indoors while the device is on for a long time without any risk. It is worth square. M. Of the specified cloth in a specialized store about 1700 rubles. If you do not install it yourself, for each square. M. Have to pay specialists 1,500 rubles.

Can I install it myself?

Reviews say that the installation "Plan" (heater) can be carried out completely independently. In this case, it is very important to take responsibility for the priming of the surface. This is necessary for a tight fit of the material to the ceiling. Thus, the mold will never appear indoors. As fasteners, experts recommend using dowels. In this situation, much depends on the material of the walls.

If the house is paneled, the plugs fit perfectly. When it comes to wooden surfaces, it is possible to save on locks and take, for example, hooks with caps. In the twist, they are a bit more complicated, but the owner spends an amount of money less. Before installation of the control unit, the wiring should be checked without fail. Otherwise, you can damage it and short the circuit completely. To avoid any malfunction, all metallic objects should be removed from the film during installation. Also get rid of the mirrors. The modulator in the kit is two-channel. It is fixed to the control unit via two connectors.

Important characteristics of the heater "Plen 1.8"

Power kv. M. Of the canvas is 5 kW, and the operating frequency is 23 Hz. For an hour of continuous operation, the heating element consumes about 6 A per minute. The coefficient of efficiency is at the level of 86%. Power is provided through a network with a voltage of 220 V. The control unit in the kit is standard. Economical mode is not provided by the manufacturer. Peak power of the system can reach up to 6 kW.

In general, the surface of the canvas is fireproof. The density of the material is about 8 kg per cubic meter. M. The wavelength of the radiation in this case is 9 μm. The modulator is installed by default on the MPP-23 series. The binding to the power cable can be carried out by means of various fasteners. The electrical panel for this heating system is suitable for the "Salute" type. The magnetic starter in this model is provided by the manufacturer. It will cost approx. M cloth for the buyer for 1550 rubles. In this case, installation of a square. M. The film costs an average of about 1700 rubles.

Opinions of owners about the system

This system of "Plain" reviews of owners deserves a positive, because this film can be used in different rooms. For brick houses, it fits perfectly. In this case, she also has a place in various workshops. Electric heating element in the canvas is resistive. In service, this heating system is very simple.

If necessary, it can always be cleaned by wiping it with a dry cloth. Also the system "Plain" reviews is good because of absolutely silent operation. In winter, infrared rays favorably affect the skin, and this should be taken into account. Thus, on cloudy days this film can have a positive effect on the human body.

Installing the film in the house

Using the fastening elements, you can independently make the installation "Plain". Heating is controlled by the control unit. In the installation it is quite simple, any person can switch modes. To fix the film, you need to make all the measurements and prepare the fasteners. Work should always begin from the edge. If you damage the heating element, then the canvas can be immediately thrown away. Thus, you need to fasten the sheets extremely accurately.

Minimum overlap must be done at 5 cm Hooks in this case is not recommended. In a nasty situation, after a while the leaf may sag, and this is undesirable. In this regard, with dowels everything is done very quickly. They are expensive in the market, but such elements are reliable. As a result, you can not pay attention to them for many years.

Heater parameters "Plen 2.0"

The maximum temperature of surface heating is 30 degrees, and the maximum voltage is 200 V. The heater can withstand a load of 30 A. The temperature regulator in this model is installed in the PP233 series. Networking can be done in various ways, and the cable length is 3 meters. As can be seen from the name of the heater, the thickness of the canvas is 2 mm. The wavelength of the radiation in this case is 9 μm.

The working power of this heating system is at the level of 5 kW. For an hour of continuous work, it consumes an average of about 8 kW. The coefficient of efficiency at the maximum reaches 85%. The density of the material inside is 8 kg per cubic meter. The power supply of the control unit is carried out from the network with a voltage of 200 V. The limiting power of the modulator is exactly 5 kW. It is worth square. M. Of film in a specialized store is approximately 1800 rubles. Installation in this case the owner will cost about 1600 rubles. For the square. M.

System Reviews "Plain 2.0"

Most of all, a film with a thickness of 2.0 mm is suitable for heating various administrative premises. In an apartment building, it can be installed at the same time. In operation it is simple and does not require special attention. Heating the room is a long time, but this is perhaps the only drawback of this system. In winter, this heater is best used with other heating appliances.

They say that saving on electricity with this film can be quite simple. It is important to learn how to use the control unit correctly. In damp areas, this heater can also be used. After several hours of operation, the humidity returns to normal. Also, many fell in love with this system for a long shelf life. Given the low cost of the goods, this is considered a weighty advantage.

How best to fix the film?

In order to qualitatively install in the house "Plain" (heating), installation by yourself must be done using only dowels. Power units are fixed directly near the sockets. The modulator is also fixed there. To safely use the heating system, the minimum distance from the edge of the wall should be 3 cm. At the same time, the indent should be at least 4 cm from the calculation of the square of the room.

Before work, the wiring is checked without fail by the tester. Otherwise, there may be situations with a short circuit. It is strictly forbidden to use metallic objects during installation. When fixing the film on the surface, the adhesive is also not recommended. Puncture the protective layer carefully, so as not to damage the heating elements.

Characteristics of the heater "Plan 2.2"

The ceiling power "Plan 2.2" has 5 kW, and the operating frequency is 55 Hz. The thermostat is set to only one. As an additional layer is used by Aluf. In this case, it significantly improves system performance. The efficiency is at the level of 77%. Wiring in the system is applied series PV3 with increased thermal insulation. Electroautomatics in the control unit is present, the modes are configured only manually.

A magnetic starter in the system is also installed. The maximum temperature of the resistive heating element reaches 55 degrees. The radiation wavelength is on average 10 μm. The power source of the system is a network with a voltage of 220 V. Peak power of the modulator is at a level of 6 kW. Sq. The cloth weighs exactly 800 grams, and the density of the inner material is 8 kg per cubic meter. M.