Heat sensor for underfloor heating: description, instructions, reviews

A heating appliance equipped with a thermostat is now the rule, not the exception. Many consumers today are aware of this, which is why they purchase systems that are distinguished by the availability of modern functionality, similar to what will be described in this article below. This is not too complicated and a small device can bring a lot of benefits, allowing the owners to enjoy comfort, without exerting additional effort during operation. Almost always the system of a warm floor provides for the need for a thermostat to ensure that its operation is maximally correct and effective, this is known to experienced users.

Reviews about the thermoregulator

A heat sensor for a warm floor, if the system operates at the expense of water, is not mandatory. This is due to the fact that building regulations do not prescribe such requirements. However, if the floor is an additional means of heating, experts recommend spending more effort and money to install the described device to adjust the heat intensity. If we are talking about the electrical system of the warm floor, the choice of sensors for them is small. Such devices must be present in this case necessarily. According to users, a heat sensor for a warm floor can bring a lot of benefits. With it, you can reduce the cost of heating resources, prevent overheating of the room, automatically program the necessary temperature, and forget what cold rooms are in the winter. If you choose a quality controller, as customers say, then the device will last a long time, the main thing is to select and install it correctly.

general description

If you need a heat sensor for a warm floor, you need to decide on the type of device when selecting. It can be either manual or programmable. The first is characterized by simplicity and maximum reliability. In order to set a certain temperature, it is necessary to turn the knob of the regulator in the desired direction. If we are talking about programmable devices, then their device is more complicated, the design will have to be paid more expensive, and it will be possible to choose from a wider range. A similar heat sensor for the warm floor is controlled by the buttons of the remote control or the touch panel. Models of this type allow you to adjust the performance of the system at a certain point. Owners will be able to plan the operation of the device, taking into account the changes in the situation. Thus, with cooling, the thermostat will intensify the heating of the room, even if the owners are not at home.

Main characteristics

If you want to install a floor temperature sensor , you should pay special attention to the programmable models. Despite the fact that they can cost more than analogues, during operation you can achieve significant savings in resources. This is due to the fact that the device is able to automatically lower the temperature if the room is cold or there is a warming. Which is especially convenient if the room, for example, is empty for the whole day.

Among other things, models can differ in type of installation. You can prefer hinged or built-in options. The latter can be hidden in a niche, while the former are located directly on the wall.

It is important to know how to properly operate the floor temperature sensor. It is a very important element, the thermoregulator function depends on it. This is a temperature sensor. Typically, this is a thermocouple, which consists of wires. The latter are connected to the terminals of the thermostat and used to determine the resistance in the circuit during heating. The built-in devices are located inside the device, while the remote ones are located outside.

A thermal sensor may be present in the thermostat, among other things, this element may be of one or more types. There are remote described elements that are used to measure air temperature. These components are installed in a suitable place, which is removed from the radiators and air conditioners. After all, such household appliances are able to distort the readings. The thermal sensor, which is intended to measure the temperature of the surface of the floor, should be located under the finish floor covering. This approach is very convenient for use in the kitchen, bathroom or in those rooms where the temperature quite often changes throughout the day.

Connection Instructions

At the first stage, a connection diagram of the thermostat is prepared, where it is necessary to specify the location of the temperature sensor and thermostat. It is important to specify in the drawing and the procedure for connecting the device to the electrical network. The master can use an individual cable or an ordinary outlet. The heat detector can be installed in the thickness of the concrete floor, then to protect it you should use a corrugated pipe with a closed end. The bending of this element must be flat, so that in the event of a breakdown the sensor can be easily removed and replaced with a new one. Otherwise, for the repair will have to dismantle the floor covering.

Recommendations for work

If you decide to install the detector yourself, then the installation work should begin with the preparation of a hole in the wall. If we are talking about a hinged thermostat, then on the wall it will be necessary to mark out the place. The front panel must be removed from the device, and after the thermostat is installed in the intended location. The master must connect the thermostat contacts to the heating cable. Using the manufacturer's instructions, it is necessary to connect the sensors to the terminals. When you are packing, you must connect the power cord. The next step is to replace the front panel of the device.

Nuances of works

In order to avoid the possibility of a short circuit and prevent electric shock, a circuit breaker must be installed before the thermostat. This element may not be necessary everywhere, but if it is a question of rooms whose conditions are high in humidity, then these rules must be observed. For the simple reason that the equipment will look unaesthetic, it makes sense to hide its elements in the enclosure. Work with the power supply can only those people who have the appropriate skills and training. If you install a thermostat for a warm floor with your own hands, but do not have the appropriate training, then experts recommend that an electrician be invited to conduct the corresponding work.

For reference

When installing heat sensors, you need to pay attention to the fact that there is a need to correlate the power of the heating cable with the switching capacity of the thermostat contacts. If this ratio is not high enough, a magnetic starter must be included in the circuit . 220 V - this is the value of the coil. Thermal sensors for heating should be checked only after the concrete screed has completely dried. This is suitable for those cases when the warm floor was mounted under the mentioned base. Similar work can be done in 28 days.

Conclusion

The heat sensor must be checked after connecting the thermostat to the mains. It is important to set the device to minimum temperature and turn on heating. After the thermostat is switched to the maximum mode. As soon as you hear a characteristic click, we will say that the circuit was closed. The master will understand that the connection of the thermostat has been performed correctly.