Furnace "burzhuyka" for the garage with their own hands on working and on wood. How to make a "burzhuyka" for a garage with your own hands?

The garage requires a special arrangement. Due to the fact that it stores not only some food, but also a vehicle. It is necessary to make both qualitative internal and external furnish, isolation, and to spend system of heating. In the garage you need a constant optimal temperature regime. If in the warm season the heating of the room is not required, then in winter it is quite possible severe frosts, which will lead to some disastrous consequences in the storage of food and car. There may be dampness, which in time will cause mold on the walls of the building.

Optimum system of heating of garage

To date, there is a huge number of heating systems, which are effectively used to heat the garage. There is equipment:

• Factory production;
• Homemade devices.

You can use heating systems on water, on solid and liquid fuel, on gas. There are systems that work with electricity. Despite such wide assortment of these products, the manufactured "burzhuyka" for the garage with own hands used and enjoyed great popularity. This is the most optimal way of heating the garage, and for the costs it will be the cheapest.

Let's dip a bit into the story

There was such a device for heating the room in the early 20th century. At that time, the burger was quite expensive, since it required a solid fuel for the work - firewood. If earlier this equipment could be afforded only by wealthy people, today "burzhuyka" has become the most economical way to heat any room.

Initially, this type of construction was a cylinder made of metal. Also widely used for its manufacture is a metal large box. Over time, the construction began to improve. Fuel has become more affordable, and even now such an adaptation can be found both in the country and in the garage.

Ways of making "burzhuyki"

In addition to the fact that a "burzhuyka" for a garage with their own hands can be made, there is also a factory production of this equipment. Modern manufacturers of steel began to develop such models of "burzhuyki", which not only can effectively heat the room, but also become its full-fledged adornment.

Now the equipment can have not only the non-standard form, but also on its surface various decorative details in the form of forged or cast metal elements. All only according to the developed unique design of "burzhuyki."

Types of "burzhuyki" depending on the fuel used

To date, can be made "burzhuyka" for the garage with their own hands on working and on wood. This equipment has certain distinctive features and characteristics. You can make both of its kind yourself.

Varieties of the construction of "burzhuyki"

It is quite simple to make a "burzhuyka" for the garage with your own hands. To do this, you only need to select its main view.

So, this equipment can be:

• Stationary;
• Improved.

Stationary homemade "burzhuyki" for the garage are concrete structures. They are used for the uninterrupted heating of the garage. They are more massive and heavy. For their construction it is necessary to make a foundation. This equipment can quickly heat up and give its heat for a long time. The owner only needs to maintain the temperature in the furnace. There is one, but a significant drawback of such a "burzhuyka." It is too fast and consumes a lot of fuel.

In order to make this design more economical, it will be necessary to build it out of refractory bricks.

The manufactured "burzhuyka" for the advanced garage of the hands is a simpler design. It is constructed of metal and has several departments:

• Firebox;
• Ash department.

Also, for convenient and effective use of this equipment, a removable cover is provided. As a rule, cast iron is used for the good heat output in the manufacture of the "burzhuyki". It has an excellent heat dissipation. An obligatory element of this design is the metal legs, which ensure a normal circulation of air masses under the equipment.

It can work and that and another made "burzhuyka" for the garage with their own hands on working off or on solid fuel.

What is this equipment made from?

Quite often homemade "burzhuyki" for a garage can be made with the help of metal gas cylinders. This is the most common type of equipment that is economical. At its cost, an empty gas cylinder will be several times lower than a sheet metal, from which "burzhujki" can also be made. Also, simple metal boxes are widely used in production. They can be of different sizes, and for more effective space heating, instead of one chimney, additional ones are welded to the structure, which ensure optimal heating of the room.

Stages of manufacturing homemade turbines

The construction of this heating equipment consists of several stages. We need to think about its size and determine what it will be made of. Next, a drawing of a garage for a garage is drawn up. It indicates not only the parameters of the entire structure, but also the amount of material used for its construction.

It is quite simple to make a "burzhuyka" for the garage with their own hands. Drawings of this equipment are compiled independently. Also it is possible to resort to the help of specialists.

Then there is already welding of the structure and its ennobling.

What do you need to make this equipment?

Many are wondering how to make a "garage" for the garage on their own. In this there is nothing complicated. To do this, you need to choose the optimal version of the material and special equipment.

So, for the construction of this equipment you will need:

• Gas cylinder;
• Metal sheets;
• Metal pipes;
• welding equipment;
• Bulgarian;
• Auxiliary tools.

Homemade gas stoves for a garage can be made and using metal drums.

The process of manufacturing "burzhuyki"

So, the process of work begins with the marking of a metal cylinder or barrel. In order for the stove to "burnt" for the garage to give good heat, you must initially choose the right size. The optimal balloon parameter is 50 liters. As for the thickness of the walls, they should be at least 2-3 mm. If the walls of the structure are thinner, the stove can, in the process of burning, "lead".

It is necessary to mark with one of the sides of the mark where exactly the door of the furnace and the podduval will be located. The size of the firebox should be such that it can hold a firewood with a diameter of 10 cm. As for the size of the door for an ash-pit, it can be any. The most important thing is to be able to properly clean the equipment of residual combustion products.

The height of the pit is at least 3-4 cm from the bottom of the cylinder or barrel. The furnace is located at a distance of 5 to 10 cm from the ash-pit.

On the reverse side, there is a place for welding a metal pipe to distribute heat throughout the room. Its size must be at least 100 mm.

After that, the cap of the cylinder or barrels is cut off by the Bulgarian. With the help of the same tool, the doors of the furnace and the ashtray are cut strictly according to the marks made. The cut off lid of the barrel or cylinder is used to create a special platform, which will serve as a partition between the ash department and the furnace. Inside this area, holes are already made for mounting the grate.

Further inside the barrel welded metal corners at a height of 2 cm from the door of the ash department. It is on them will be installed site.

The grilles for the "burzhuyka" can be made independently. For this, a small-size fittings (10-12 mm) is used. And you can buy ready-made devices of this type.

Next, the work moves to the outer surface. There, in the cut holes, the hinges for the doors are welded. The most important thing in this is that the doors are tightly closed, and the smoke that forms during the combustion does not enter the room.

Then, from the metal sheet, the lid for the "burzhuyka" is cut out. In it a hole is made for the chimney. If there are small crevices in the welding process, then they can be treated with asbestos. Similar work is carried out with a pipe that provides room heating.

Upon completion of installation, all components of the "burzhuyki" are made to clean the joints with the help of a Bulgarian.

Then the oven should be installed in a garage in a safe place. It should not contain any combustible mixtures or liquid fuels in order to avoid the process of ignition. Next, the equipment is ignited. With its help, unsealed connections are detected in the system. They are eliminated. After that, the "burzhuyka" is ready for use.

In the process of building this equipment, it must be remembered that it is only necessary to operate it in accordance with the requirements of fire safety.