Full-fledged hoods: types, benefits, installation

If the kitchen does not have enough free space, then its use sometimes becomes inconvenient for some housewives. For example, there is no way to purchase most modern hoods. Especially for this, the latest technology solutions have been developed and created - fully-built hoods. They are great for those kitchens where it is not possible to place large air ducts and bulky cleaning structures. If you also plan to purchase such equipment, then it is worth reading the information below.

The main types of fully adjustable hoods

In modern kitchens, you can often find very unusual solutions for furniture placement and layout. Choosing a built-in hood, you can find the most convenient place for equipping the cooking area. Manufacturers are not limited to conventional models, which is why a modern hood can be built in even a hanging cupboard.

If you are interested in full-fledged hoods, then you must deal with their main varieties. One of them is a model of the horizontal type. You can place it directly above the hob or stove, while the design is fixed on the underside of the cabinet, in which there is no bottom. This design hides behind the walls of the furniture, but in some cases is installed in such a way that the lower panel somewhat extends beyond the cabinet.

Full-fledged hoods are also available for sale in the form of models that can be integrated into the countertop. This option is suitable for rooms where the hob is installed in the headset, and the hood itself should be located some distance from the cooking area. Air in this case will be cleaned due to the automatic opening of the valves, which absorb contaminants until the moment they rise and spread.

Flat hoods

Visiting the store, you will be able to meet not only sliding, but built-in hoods, which can change their height in a vertical direction. Flat designs can be considered similar to the first option. As the main difference is the feature of the installation.

The design is fixed under the hanging cupboard, does not require the removal of the bottom, but works in the air circulation mode. Telescopic hoods are also built-in, their lower panel is pulled out during cooking and has filters.

Advice of a specialist

If you decide to consider fully-built hoods, then you need to take into account the furniture layout. Thus, if there is not enough free space for storage, this can exclude the possibility of placing such a model, which is especially important when there is an air duct.

But the slider panels can create obstacles when moving around the room during cooking. Despite the fact that there are some restrictions during installation, the hoods of this type have many advantages. Especially popular are models that can be fully integrated into pieces of furniture.

Main advantages

Full-fledged exhaust, reviews about which only the most positive, has many advantages. Many pay attention to the product range. For the consumer there should be no restrictions in the choice of colors, materials and forms. However, for the reason that such models will be hidden behind the walls of furniture, do not make design a top priority. It is better to pay attention to other advantages, among which:

• The possibility of masking the case;
• Ease of installation;
• Multifunctionality.

Due to the fact that the products can be completely hidden, you will have an excellent opportunity to save space in the interior. You can install the hood yourself, without resorting to outside help. Such devices are multifunctional, they have not only an automatic shutdown mode, but also a backlight, a timer and have other useful functions.

The built-in kitchen hood of 60 cm is not the only model. Modern manufacturers offer for sale designs with different sizes, which can ideally be entered in a wall cabinet with certain parameters. Moreover, you can choose a model that is controlled by an electronic or mechanical system. Some of them have remote control.

Customer Reviews

Users note that the cases of such devices can be easily cleaned, and internal filters can be changed quickly and independently. Buyers pay attention, that after start of this or that model it works at a low level of noise, and productivity remains at height. However, in most cases this is true when the equipment operates at medium speeds. Lightness and practicality will largely depend on the correctness of the installation. This will be discussed below.

Recommendations of the installation specialist

A hood fully equipped in a 60 cm cabinet can be mounted by yourself. First, you should measure the distance between the hob and the bottom of the furniture where the equipment is supposed to be placed. If a gas stove is installed in the house, this parameter can be equal to the limit from 70 to 80 cm.

If we are talking about an electric hob, the distance can be reduced to 60 cm, but it should not be done less. If it turns out that space is not enough, then this can affect performance negatively. In this case, the filters will quickly clog, and the surface will lose its appearance.

For reference

Extraction to the kitchen of 60 cm should be arranged according to one of the existing technologies. You can not use furniture, creating a niche in the wall. This will allow you to use free storage space, but the work will take a long time.

Technology of work

An exhaust of 60 cm should be built according to a certain technique. It assumes at the first stage the implementation of marking in a niche or a cabinet. At the right height, you should draw a horizontal line, the master will orient on it when installing the equipment. In the case of the cabinet holes are made for screws. In this case, the parameters of the hood model must be observed. Then you can start fixing the device.

Many models assume the necessary fasteners. Using the level, you can verify that the device is positioned horizontally. There should be a short distance between the equipment walls and the cabinet. This will not only reduce the risk of damage to furniture, but also relieve the owner of the apartment from additional problems that may be associated with noise and severe vibration during the operation of the equipment.

Once the 60 cm exhaust hood has been installed, the air vent can be connected. It is fixed in the opening of the device and leads to the ventilation shaft. For this, a corrugation is used, the pipe must be positioned in such a way that there are no bends in it on the way to ventilation. Otherwise, the equipment will not cope with air purification. It is important to seal the seams so that the air does not go back into the room. Full-fledged hoods are installed taking into account the connection of communications, which must be checked for serviceability. They should be located near the outlet, which should be near the work area. If the work is not accompanied by a strong noise and other reactions, then it was not mistaken.

Advantages of Elikor "Integra"

60 см, по мнению пользователей, имеет достаточно простую конструкцию. Extract Elkor 's fully-tuned Integra 60 cm, according to users, has a fairly simple design. Too much noise in the work she does not publish and is inexpensive. Pulls the air perfectly, but in the winter with this problems can arise.

Consumers also note that this model is very easy to use, the build quality is excellent, the design is attractive, although with this option it does not really make sense. The panel is convex, for many users this is a significant plus. If you are limited in the budget, then consumers who have already experienced all the advantages of this option are advised to purchase it. With its tasks, the model handles perfectly.

Advantages of Bosch hood DHL 545S

Bosch's fully-exhausted exhaust hood of this model has an acceptable price, for which you will have to pay 9500 rubles. The manufacturer gives a guarantee for 12 months, during which time you will be able to assess the quality of the goods. The product is compact and suitable for small rooms. The case is painted in silver, so you can enter the model in any design project. The maximum performance is quite impressive and is 540 m³ / h. This indicator was achieved due to switching speeds.

In the work of the hood, you can use an intensive level. Using the slider control system, you can choose one of four speeds, which simplifies operation and makes operation possible even if older people use the equipment. If you install a fully-built hood of this type, then you can use several modes. Among them, it is worth noting tapping and circulation. Quality work will be provided also due to the presence of fat filters. The latter are extracted and cleaned, since they have a fairly simple construction.

This hood in the kitchen of 60 cm is a wall model, the power consumption of which is 310 watts. Before buying, you must consider that the equipment does not have a display, and as a lighting a halogen lamp is used. Follow the contamination of the filter will have to do, because the equipment does not have an indicator, like an anti-return valve.

Conclusion

Before purchasing the built-in hood, you should familiarize yourself not only with the technical characteristics, but also with the manufacturer, who could definitely prove himself in the market of the corresponding goods. For example, the Simfer technique can provide a performance that reaches 460 m ³ per hour. Usually, these models are made with glass, and you can buy them for 4800 rubles. In the same price category, there is Hansa equipment, the capacity of which reaches 300 m ³ per hour.