Dowels-clamps - reliable fastening

During the laying of electric wires, dowels-clamps are used for the direct fixation of cables taken separately or twisted into the harness.

This kind of wire-holder is practical, convenient and easy to install. Do not overlook the fact that the cable fixing elements in no case should cause mechanical damage to the material being laid. Also, there should be no kinks and plastic changes. It is necessary to describe the scope and general purpose of such fastening material, as well as its positive and negative qualities.

Cable tie dowel

It does not require special installation skills, reliable and simple fixing. During installation, the dowel-clamps do not require the use of additional supporting attachments (nails, screws, screws, etc.), as well as the use of special tools.

It is enough just to drill a hole of 6 mm (if the dowel-clamps have φ 5 mm), insert the wire that you are mounting in the fastening loop and insert it into the prepared hole. This type of fastening is successfully used both inside and outside buildings or premises. It is irreplaceable when fixing the cable to a wall made of concrete or brick. The dowel-clamp 5-10 mm is intended for fixing the electric wire. It has resistance to aging and external factors of exposure to an aggressive environment. The material from which the dowel-clamps are made is nylon. This kind of syntactic polyamide is durable. It also withstands loads of temperature changes from -40 to +85 degrees Celsius.

Dowels-clamps: advantages

To list all the advantages of this attachment, there is not enough page. Consider some of them:

1. Savings and rationality. Instead of the whole fixing kit (clamp / dowel and screw), only one element for securing the cable.
2. Reducing the physical costs when mounting is 80%, since the installation is carried out with one hand (simple and reliable).
3. The material from which dowel-clamps, polyamide, are made of synthetic origin. It contributes to the fact that the installation can be performed during any time period, even in winter with severe frost.
4. Withstands a temperature load from -40 to +85 degrees C.
5. Has a high degree of bearing capacity, a reliable and durable type of attachment.
6. The dowel clamps are made of a material that is resistant to ultraviolet radiation. Because of these qualities it is widely used with external fasteners of wires.
7. It is fire resistant. Since nylon does not contain halogen, the safety in case of fire is increased.
8. This type of fastening is used when carrying out a line without laying the wire in a box.
9. Refers to the most inexpensive and fast type of attachment. Used for wiring open-wire. In cases where the cable is damaged, the damaged area can be replaced quickly and easily.

Disadvantages of fastening

The disadvantage of this type of attachment is that it is practically not used when laying the wire in an apartment. In general, the area of application of dowels-clamps is electrical wiring in industrial premises.