Decorative plaster for concrete

Of course, not everyone agrees with the designer's proposal to trim the walls in the apartment with such material as plaster for concrete. However, this is not surprising. After all, as a rule, during repairs, basically all the forces are directed just to hide the concrete walls, and not to expose them for show. Nevertheless, this type of decoration has not only the right to exist, but also quite a few admirers. Among the latter are, as a rule, lovers of loft style and high-tech.

What is it?

Let's say at once: if plaster for concrete was used during the design of the surface, this does not mean that the walls will look as if the builders left the apartment only yesterday and did not have time to finish the repair work. Not at all. The method described by us only has such a prosaic name. In fact, thanks to him, you can create a concrete surface that has very sophisticated qualities. So, it can be in the end not only a gray, albeit an ideally executed coating. Plaster for concrete, the seamless texture of which helps to create smooth surfaces, allows you to create an interior with the effects of gilding, antiquity, corrosion of metal, metallic luster. In addition, it is also possible to apply an invoice to it.

Advantages and disadvantages

We will start right away with the latter, since there are practically none. Is that a fairly high price of the source material, but who said that the quality can have a small cost.

But the merits - just a lot. And most importantly, perhaps - it's that to put on the wall such material as plaster for concrete, you can easily do it yourself. It is enough to have at least initial skills of handling a spatula. In addition, this material contributes to the improvement of the heat and sound insulation qualities of the room. And still it can be attributed to the category of durable and universal coatings, as the walls treated with such plaster for a long time retain an attractive appearance, are subject to coloring and further finishing in the event that the interior is somewhat embarrassed. Well, about the exclusive coverage, perhaps, and stutter is not worth it. You understand, the walls, finished with such material as plaster for concrete, almost everyone will cause astonishment. Especially in combination with a properly chosen interior.

Next, we will talk about the process of applying the material to the wall and give recommendations on the choice of the finishing material.

Preparation

Actually, there is nothing new here. Surfaces for such material as plaster for concrete, are prepared almost exactly as for any other finish. The first thing you need to get rid of the old coating: wallpaper, paint, etc. But there is one unpleasant moment. If previously the walls were covered with ordinary plaster mortar, it would have to be disposed of by any means. In principle, nothing particularly terrible there. Walls need to be carefully moistened, and, most likely, not once, wait until they are impregnated with water, and then scrape off the old mortar with a spatula. Yes, it will require time and energy. But if you really want creative in the interior, you have to work hard.

Padding

This procedure should be given special attention. Quite often, home masters refer to this stage, to put it mildly, irresponsibly. Anointed the walls with a solution, and okay. And completely in vain. Priming should be carefully, preferably even several times, by taking a break between the first and second application of the primer, which will allow the first layer to dry well. After all, for what, in fact, this stage in finishing is needed? To finish the material well adhered to the base surface and for a long time and firmly on it kept. So get a good primer and carefully dilute it with walls.

Finish

Special problems are not with the application of such material as plaster for concrete. The technology of the work is quite simple. However, there is one small nuance. Before proceeding directly to the surface finish, it must be applied with a thin layer of a special substrate. Already on top of the primer! Its composition includes sand and special paint. Where to get the substrate? To buy together with the basic finishing material.

How is plaster applied to walls for concrete? The texture of the finished surface will depend on the chosen technique. What kinds of it exist, we will tell further.

Spray

The easiest, enjoying the home masters popularity option. Plaster for concrete literally sprinkles on the wall. How? Very simple - using a banal broom. On it impose a small amount of solution, and then just hit the handle with a stick, trying to direct the spray on the surface being treated. It may sound pretty funny, but those who did it say that the procedure can be learned quite quickly. By the way, if you want to have a flickering surface at the output, you can apply a special composition to the plaster. It is called asching. Buy it, too, can be in the store, and it is applied two days after the surface is dried with a regular sponge.

Working with a trowel

Decorative plaster for concrete is applied thin, not more than half a centimeter by a trowel, in small strokes and in different directions. Thus it is necessary to leave small influxes. Simply put, you do not need to carefully iron the surface. After twelve hours on the wall you need to walk a shallow nazhdachkoy, sweep the dust, and then apply another, already more liquid layer of the solution. After three hours, walk along it with a trowel, performing the final leveling, then apply impregnation, in a day - wax and carefully polish the surface.

And one more important point. Decorative plaster for concrete retains plasticity for a long time on the finished surface. Therefore, it can be applied using a stencil, any pattern.

Where to use

This type of finish can be used in almost any living space. Moreover, it looks great plaster for concrete in the bathroom. As for its quality characteristics, the increased humidity and temperature gradients are not frightening for it, and the combination of such a creative surface with chrome bathroom accessories will make the interior of this room unusual and refined.

The only thing that needs to be considered when applying this type of decoration, is the size of living quarters. Agree, a small room with gray walls will more resemble a prison cell, finished for some reason in the loft style. But there is always a way out. If you really want to arrange a room in this style, then, firstly, you can not finish all the walls with concrete, but combine the plaster with other materials, and secondly, use additional elements: decorative plinths, stucco moldings, various rosettes.

Material selection

Here in this matter the home master should be thoroughly savvy. Because you will not have to choose the material at the price you like, but in accordance with what result you want to get. So, for example, if you need walls that mimic just concrete or have a metallic sheen, pay attention to the plaster Novacolor Animamundi. The material of San Marco Concret Art will make it possible to obtain aged wall a-la aged concrete, and the texture plaster Prof Decor will create a relief surface with metallic impregnations. Do you want to achieve the effect of gilding? Pay attention to the products of the French manufacturer Beton D'archi.

Conclusion

We told about such finishing material as plaster for concrete. The photos presented in the article will help you to more accurately understand what this coverage looks like. We would like to give one piece of advice at last: if you decided to decorate the walls in one or another - especially unusual - style, try to make the whole interior fit. Otherwise, you will hardly be able to achieve harmony.