Catching carp on Donkey from the shore: ways, tackles, bait, secrets

Beginning anglers mistakenly believe that the carp can use the same techniques as its closest relative, the carp. Indeed, the latter species enjoys immense popularity, due, inter alia, to its calm disposition. Therefore, there are many effective methods of fishing this fish. However, carp has a restless character, rapid reactions and large sizes. Although it is a species of carp, but with a wild origin. This fish usually lives either in riverine conditions, or in ponds not associated with artificial farms. Accordingly, for productive fishing, it is necessary to take into consideration the secrets of carp fishing, the rules of making and applying gear, the bait recipes and other subtleties of the process.

Optimum place for catching

Sazan also refers to sedentary fish that do not like to change their place of life often. In this there are pluses and minuses. On the one hand, one can count on periodic "work" in some places, but on the other hand, in the process of searching, the probability of accidental detection of the fish habitat is reduced. A universal approach to identifying the right places is to focus on secluded and wild areas. At the same time, successfully catching wild carp on the donkey from the shore does not at all mean that the fish is hiding in shallow water, and this technique will be just as effective across the coast. The biting is more likely due to the presence of a pit in the point of casting or a place under the bucket.

Especially in the rivers, carp is looking for quiet places where the current is not so active. These can be places of bends along riverbeds, blockages and access passages. They encounter fish and on the brow, which are adjacent to the Dreissena shells, as well as in the bays of rivers with thick algae. Feeding sazan closer to dawn - this is a very good time to activate the angler, but for this it is necessary to select the appropriate gear suitable for the season. The most favorable is the catch of carp in June, when it hides in the reed edge or in the thickets of the same algae. Orient stands on the arrowhead, water lilies, rdest and buckwheat. As for the depth, it should be at least 2-3 m. That is, it is clear that catching near the shore can only be at the points of a sharp drop in the pits. True, sazan is also found in shallow water - just at the time of dawn or dusk.

Tackles for river fishing

It can be said that these are the classic conditions for catching. Most often, a conventional fishing rod is used, in which one negative factor, flow, should be taken into account. Therefore, if possible, it is necessary to use a feeder. The river version of this gear has several differences from the traditional lake. Firstly, the length of the rod varies on average from 3.5 to 4 m. Secondly, by weight, the tackle must cope with a large load. Even the average fish of this species is of considerable size, and if we take into account its behavior, the margin of safety must be serious. If fishing for a large carp is originally calculated, the gear must be ready for a load of 100 kg. Means are also provided for combating the current. To do this, attention is drawn to the line, which is best represented by a braided cord with a smaller diameter than that of similar monoculars. Minimizing the effect of the flow will reduce the harmful effects on the rigging, but at the same time it will not affect negatively the bursting force.

There is one more feature of such gears, which amounts to a mass of feeders. In the case of using such additions should be guided by modifications, the weight of which is not less than 120 g. In quite restless conditions of the river, you can use additional fasteners - for example, experienced masters fix to the bottom of the wire antennae. If catching a donkey with a feeder does not provide sufficient sensitivity, then it makes sense to switch to looping snap schemes. Practice is the use of the paternoster, as well as symmetrical and asymmetrical loops.

Tackles for fishing in a pond

To inexperienced anglers for acquaintance with a sazan it is recommended silent pools. It begins with the use of flywheels. At once it should be noted that the calmness of the water surface does not guarantee ease in the process of vyvazhivaniya. All methods of catching carp with float gear provide for risks of collision with underwater obstacles in the form of bushes, driftwood, algae, fallen trees, etc. In quiet ponds and reservoirs there are no less problematic places than in a river - and just such areas are chosen by sazan for Of its habitat.

Actually, from the fisherman at the preparation stage, one thing is required: to pick up a strong rod with a length of about 5 m. Also, it is important to assemble the structure taking into account the feed. For example, catching carp on corn, the installation of gear for which requires the connection of feeding troughs, should calculate the way it is insured against fluctuations in the flow conditions. That is, the rod must also cope with the weight of the sinker.

If you plan to work with long casts, then you should prefer a mast tackle. The length will be the same, about 4-5 m, but the technique of handling this rod will facilitate the task of the fisherman. But there is an important point in choosing a coil - it should be a inertia-free mechanism with a size of at least 3500, provided with a friction brake. On site it is also important to correctly load the match float so that it is sensitive and not lost sight of at long distances. In the question of how to catch wild carp in calm conditions, you can turn to the rod rods. These models are designed specifically for strong and large fish, to cope with which helps to have a rubber shock absorber.

Configurations of bottom equipment

For a basic version of such equipment, a feeder, a monolier, a hook with a swivel, as well as a fluorocarbon high-strength fishing line are required. The first thing to do is to take a mono-length of about 50 cm, after which this segment is folded in half, but in such a way that one end is longer than the other about 10 cm. Next, a swivel is attached to which the feeder will subsequently mount. After that, you can tie a knot. Then the fluorocarbon fiber line 1 m long is taken. According to the "loop in the loop" technique, the leash is fixed to the long end and attached to the tackle with the feeder. Depending on how much weight is calculated for catching carp on the donkey from the shore, you can vary the parameters of the loops.

Also the variations of the rigging, which are used by amateur anglers, have spread. For example, one of the simplest versions of this type is called a "nipple" and acts on the principle of a spring. The assembly will require a spiral trough or a lid from a plastic bottle (future spring base), several hooks (1 to 4) and a braided forest cord for leashes. On the main line is fixed the feeding trough, which is placed on the stopper from the bead. Then you need to make woven material from the woven material, which will be fixed along the circumference of the spring with the same indentation. At the end, a bait is placed on the hooks. If catching carp on the Donkey from the shore does not give the expected result, then the efficiency of the process can be improved in several ways. For example, as a bite activator , a pheromone additive can be used, which is equally suitable for both cold and warm water environments.

Selection of the line for carp

Any responsible fisherman before learning new ways of catching unfamiliar fish, certainly reads relevant literature and finds out the experience of other colleagues. In the case of carp, the first thing you can hear is an incredible power, in taming which will help only a strong rigging. As a result, many people try to make the components as strong as possible, thick and powerful. This rule is quite suitable for fishing or spinning, but the choice of line is not so straightforward. It is believed that reliable from the point of view of prevention of breaks catching carp on the Donkey from the shore is realized with the help of monofilament fishing lines with a diameter of about 0.25-0.3 mm. But, as practice shows, excessive insurance in this business to anything, because the main burden on himself takes the shock-leader. Its length of 12 m will provide confrontation and underwater brow, and serifs in snags.

On the other hand, the expediency of using a thick line as a safety net is also not discarded by some even experienced anglers. But this aspect is also controversial. A thick fishing line with all the strength will create the effect of the sail under the water, which will adversely affect the behavior of the sinker. Therefore, fishing for a donkey with a feeder can be carried out with a fishing line, the thickness of which is 0.2-0.25 mm.

Requirements for sinkers

In the case of the choice of the functional part of the rig, the same problem arises between the relationship between the ability to withstand the load from the effort of the fish, as well as general ergonomics and assembly efficiency. As in the case with the line, many people want to strengthen the base by choosing a sinker heavier. Rods of the middle category are designed for sinkers of about 130 g. At the same time, do not forget about the power, calculations on which will lead to the conclusion that, for example, weighting the base to 400 g will make it impossible to use such equipment. And this is not to say that the snags and other underwater obstacles, for which the hooks for carp fishing, which act on the principle of an anchor, often provide additional load. Nevertheless, it is also necessary to resist the current. Professionals solve this problem not by increasing the mass, but at the expense of properly selected forms. With strong currents, it is worth to abandon the pear-shaped elements in favor of load-frames, the flat surface of which optimally holds the bottom.

What to catch

Options for the main bait - a mass of both animal and vegetable origin. According to statistics, the first are used less often than plant bait. This is due to the fact that worms with leeches, for example, except carp, are also attracted by a pike with perches. And with the approach of predators carp tries to hide. If the choice falls on this option, then it is better to use bundles of worms in the spring time. The main means of providing this part should be legumes and corn. The first option is desirable to use after thorough soaking in salt water. There will be other nuances if you plan to catch carp for corn. Mounting the gear according to the classical principle with a flywheel or mast rod allows for the attachment of several grains in such a way that the hook sting remains exposed. You can use either canned corn, or you can prepare it yourself, softening in water over low heat.

What should be the bait

Large peaceful fish feed on pomace, breadcrumbs, corn, peas and other products. But again, it is important to properly prepare the foundation. Usually they form something like vinaigrette or porridge. It is important to take into account that carp in summer is not as picky as in spring. Therefore, there are practically no limitations in the bait recipes. But there is another problem, as in the case of animal baits. This is the risk that the bait will attract non-target fish, including a bumper, an id, a chehon with a scoundrel, and so on.

Therefore, it is still necessary to adhere to some rules of fish cooking, which allow for precise feeding of carp. In river conditions, the optimal recipe will be as follows: in a mixture of 4 kg of pellets and 1 kg of cut meat, add amino acids to 50 g. Next, the question arises as to how to catch carp on the resulting gruel. As a binder, you should use ordinary clay, which can be harvested directly on the site of fishing at the river. The mixture is mixed, after which the balls are formed. They should also be hooked.

Recommendations on the technique of catching

Immediately after choosing the location and location, you should feed the fishing zone and start preparing the gear. At the casting length, you do not need to save. Especially in large reservoirs and reservoirs, the rule is that according to which long-distance casting provides a large fish. However, the first bite can disappoint a small fish - this, too, should be prepared. And you can not relax. The fish, though large, but smart, and the reactions may be unexpected. Therefore, catching carp in June should be carried out by one tackle, otherwise there is a risk of not being able to catch all the fishing rods. In the process there can be both breaks and periods of high activity. If for a long time there is no reaction, then, perhaps, the bait has disappeared into the cracks - it is worth checking it and, if necessary, performing a transfer.

Conclusion

Despite the complexity of vyzazhivaniya, carp may well please even a novice fisherman good biting. Preparations for the event require, for the most part, customary devices and devices. And even catching a donkey with a feeder will not bring much trouble if you use high-quality materials. For example, the mandatory rule is the use of a powerful rod and a strong coil with a power reserve. As for the line, it's useless to spend money on firm thick plexes. It is enough monoslesky medium size. Also it is worth to do with the sinker, taking into account that the form, rather than the mass, comes to the fore in the choice.