Building a house from a bar with your own hands is real

Today we will talk about how to build a wooden private house with our own hands. For those who prefer environmentally friendly building materials, perfectly fit the bar. Over the past few years, these homes have become incredibly popular. Today, many companies offer customers "turnkey" options, although the construction of a house from a bar with their own hands will cost much less. For the erection of one-, two-, and even three-story residential buildings do not necessarily have special skills. You need patience, diligence and compliance with technology.

What do you need to build a house? To begin with, you must prepare all the necessary materials. Residential buildings from the timber have one very important advantage over the log cabins of wood. The fact is that the cost of the material is minimal. Choosing the construction of a house from the beam with their own hands, we must also take into account the fact that the seams between the beams are not protected from atmospheric precipitation. If the walls are not included in your plans, then from the upper edges, located outside, you need to remove the bevels in size 20x20. In addition, the usual bar is inclined to the so-called "screw deformation".

There is another kind of this material - glued beam. Among its distinctive features can be distinguished increased strength and geometric stability. Even under the influence of moisture and sunlight, it does not crack or warp.

The construction of a house from a bar with its own hands takes place in several stages.

1) We begin with the erection of the foundation. In this case, the option on screw piles is perfect. Many use reinforced concrete slabs as the basis for the future of the house . Also you will not lose if you choose a strip foundation.

2) The geometry of the filled material is checked.

3) The next step is to lay a layer of waterproofing.

4) We lay the first crown from the log house. After that, the assembly of the house will go quickly and technologically.

5) The bars are longitudinally connected in the "cross". This will make the exterior walls look more attractive.

6) Assembling the beams should be carried out on wooden nails with studs made of metal. Between the elements should be placed an interventure heater.

7) When you understand the walls, you can proceed to install the beams of the ceiling, as well as the interstorey structures. They are installed on glued beams.

8) Assembling the rafter system. When it is developed, shrinkage of the beam is taken into account (up to 2%). Over the rafters, carefully lay the previously prepared roof covering.

9) Now you can deal with the internal arrangement of the house (insulation of floors and walls, erection of partitions, engineering communications).

10) If the residential building provides a terrace, the floors on it are best covered with an impregnated board. It is distinguished by its durability and increased strength.

11) At the final stage, the installation of windows and doors.

As you can see, building a house from a log with your own hands does not present any difficulties. From you it is required only to show patience and precisely to observe the points described above.