Why does not the printer print after refilling the cartridge?

Despite all attempts by print device manufacturers to achieve the most optimal combination of price / quality in their final product, the problem is when the printer does not print after refilling the cartridge, remains very relevant today. What to do in such a situation? How to avoid the "whims" of home office equipment? Where can I find a universal printer maintenance guide? These and many other users' difficulties in examples of practical solutions before your eyes.

Nothing boded problems, but something unexpected happened ...

After acquiring an inkjet printer (and the article is devoted exclusively to the budget class of printers of the type mentioned), a user can literally find themselves in an extremely difficult position after several printed photos. As a rule, the "culprit of the triumph" is the color cartridge that has exhausted its colorful resources. And everything would be ok - I took it and bought it! However, the price of a printing element is sometimes very sobering (often the user is in a state of euphoria, anticipating creative victories). It remains only one acceptable solution - to independently fill the dried up tank.

After refilling the cartridge, the printer does not print: possible causes and solutions

To understand why your printer has stopped working, you need to make sure that you have chosen the right supplies and analyzed the filling process that you performed. Perhaps you missed something important. For example, often for the sake of economy the user gets not absolutely high-quality ink. It may well be that the type of cartridge is not refilled. Possessing superficial knowledge, mistakes can not be avoided. Therefore, carefully study the material of the article presented, and it is likely that you will find an admitted miscalculation, which, by the way, can be completely corrected.

Reason # 1: Colorful

It is possible that the solution of the question, why does not print the cartridge after refueling, is incompatibility of ink. What should I do?

• Learn more in detail about the type of paint used in your modification.
• Universal ink is not always an acceptable option. It is better to spend a few and buy the original paint.
• Be sure to pay attention to the period of production of the "artistic" substance.

Reason # 2: Printing

In what else can there be problems when refilling cartridges? For inkjet printers, various consumables are produced, some of which are characterized as disposable. However, cartridges are no exception. Therefore, pay attention to the marking of your printing element: if it is not refilled it is somewhat unpleasant moment, because this kind of cartridges is equipped with a special chip that works as long as there are ink in its containers. As a result, the user has to purchase a new consumable component. However, in this case, it is advisable to purchase a refillable cartridge (refilled cartridge) of increased capacity, which will significantly affect the comfort of servicing the printing element.

Reason # 3: Wet

Yes, this is the most common reason for the often occurring difficulty with this definition: "The printer does not print after refilling the cartridge." That is, when the PZK is in a state of inactivity for a long time, the paint remaining in its nozzles inevitably dries up. In order to avoid such "ink" troubles in the future, it is necessary to seal the output holes of the print head with a special film. Then tightly wrap in a plastic bag. This action neutralizes the adverse effects of air. However, if your cartridge is still withered, do not panic. With a high degree of probability it can be restored.

Reason # 4: Air

Do not allow air to enter the inside of the cartridge chamber, since such an "omission" may be the main reason for the same problem that arises: "The printer does not print after refilling the cartridge." The fact is that air bubbles can prevent the ink from passing through the nozzles of the print head. Therefore, after you have filled the tank, close the filling holes with adhesive tape.

Reason # 5: Hardware

Often the user incorrectly installs the cartridge, as a result of which the contact plate does not reach the printer's receiving area or is not positioned properly. It may be that the interface of the device is somewhat polluted. That, in general, is commonplace when refilling cartridges.

The printer does not print after refilling: step by step rectification of the main causes of the malfunction

Depending on the type (design feature) of your cartridge, the process for restoring the print head may vary slightly.

Step # 1: Cleaning the nozzles with the printer

• Print the diagnostic page.
• Throw refilled cartridges to several full cleaning cycles.

Step # 2: Incorrectly refilled cartridges

The printer does not print after refueling if the PLZ has been exposed to cold temperatures. Due to the fact that the cartridge has been in the wrong position for a while, problems can also arise, since the outflow of ink from the print head under these conditions is simply inevitable. However, after you install the cartridge in the printer, after a few hours you can start the test print mode.

Step # 3: Cleaning nozzles with a special fluid

If you do not print the printer after refilling, and the used cartridge has been idle for a while, then this can mean only one thing - the ink has dried up in the nozzles. In order to restore the working capacity of the printing element, a number of actions should be performed.

• Place the cartridge in a shallow container at the bottom of which lay a medium stiffness piece of cloth.
• If you do not have a special washing agent, then pour in a quantity of liquid for washing glasses (having impregnated the substrate).
• In this "soaking" condition, the cartridge should be 10-12 hours, after which the print head must be gently wiped dry with a tissue.
• Install the PZK into the printer and perform several complete cleaning cycles.

In conclusion: How to restore a non-removable printhead

In addition to the considered combined (print element and capacitance) PZK there are two more types of cartridges that can also be exposed to an unpleasant moment of clogging. In order to clean the nozzles of these types of modifications, it is necessary to make a simple device.

• A rubber tube is put on the syringe, the diameter of which must coincide with the needle-shaped projection on the print head.
• Several milligrams of reducing liquid are drawn into the dispenser and injected into the cartridge under pressure.
• After a few hours, the syringe is removed and a container with paint is installed.
• The printer runs several full cleaning cycles.

In this article, we have considered only the main causes of the problematic situation, when the printer does not print after refilling the cartridge . What you do and how to deal with it, you now know. It remains only to apply the knowledge gained and not forget about the simple rules of operating printing devices. The main thing - do not leave cartridges for a long time in inactivity, otherwise ...

Creative successes to you and colorful printing!