Toilet toilet: dimensions and construction

Dachas at the moment are available to most urban residents. Usually they are already equipped. However, if the site is purchased recently, you have to make some efforts to make staying in a country house comfortable. This applies to a variety of things, including those like a country cottage toilet. The dimensions of this structure should be calculated correctly. To proceed, of course, is from what, in fact, the dimensions of the people who will use it. In any case, at the entrance to the closet, you should not bend your head or touch the walls with your elbows while using it.

Before you start building, you need to decide on a place where such a structure will be installed, such as a cottage toilet. Its dimensions are calculated in advance. In addition, it must be taken into account that the distance to living quarters should be at least six meters. You can not have a toilet next to the well. It is best to install a closet taking into account the prevailing winds in the area. In the event that there is a smell, it should not interfere with you and especially neighbors.

The easiest way is to use planks and squared beams for this purpose. The wooden wooden toilet is easy to manufacture and inexpensive. You need 10x10 beams for four racks, an overhead and top crown. In addition, you will need to purchase material with a smaller section - 5x5 cm. This bar will be needed for the pedestal device. Sheathing is best done from boards. In addition, we will need floor and ceiling boards, roofing material for the roof. The foundation can be made concrete, but it is better to slay the racks in the ground and pour the mixture. Once the place is determined, and the necessary materials and tools are prepared, you can proceed with the actual assembly of the structure.

The first thing to do is dig a hole under the country toilet. Its dimensions depend on the dimensions of the structure itself. The standard version of the toilet is 1 m wide, 1.5 m long and 2 m high. The pit must be smaller in area than the area of the structure, otherwise it will be impossible to install the racks. Its standard size is 75x75. But it is better to make it more authentic and take it out of the toilet behind. Then it will be in the future easier to clean the structure. The part that remains outside, just close the lid. The depth of the pit depends on the number of residents and the frequency of use of the structure.

The toilet room, the photo of which can be seen in the article, is a standard villa option. So, the poles are buried in the ground and we fill the bottom and upper horizontal bars with the construction. At the same time, corners can be used. In addition, at a distance of a meter from the level of the future floor, it is necessary to arrange horizontal stiffeners on two sides.

After the frame is ready, it is packed on the inner side with small sections of cross-section at a convenient height under the pedestal. Then the design is covered with boards on three sides. In order to make the roof inclined, one additional beams of the top crown is filled with an additional bar. Further the frame from above is also lined with planks. To protect the interior from moisture, use any available roofing material.

All that remains is to fill the floorboards, arrange a seat, previously cutting out a round hole in the veneer and hanging the door. The toilet toilet, the dimensions of which are comfortable, and the construction is strong, ready. You can warm it with foam or mineral wool, additionally lined with plywood.