Portraits on the monument and methods of drawing

A monument erected on the site of a person's burial is not just a tribute to traditions. Thus, relatives can express their feelings, respect and grief towards the deceased. Therefore, when choosing and decorating the stele, you need to be vigilant. Particular attention should be given to photographs and inscriptions. The first are produced today in several ways. This is engraving, performed manually and automatically, and photoceramics. Each of these methods of portraits has its own characteristics. To see examples of such monuments, please visit http://danila-master.ru/articles/vidy-portretov-na-pamyatniki.html.

Photoceramics on the monument and its characteristics

This method of making portraits appeared one of the first. Initially, images were performed exclusively in black and white. But with the development of technology and the introduction of new types of raw materials, the masters have almost unlimited possibilities. Portraits are produced on the basis of photography. The latter can have any quality. With the help of special computer programs, the image quality improves - the background changes, defects are corrected, certain elements are added or removed. A photo is displayed on the bottom of the enamel. For this, a printer is used. The upper sphere is sprayed from a photoceramic paint that has been fired in a furnace at a temperature of -800 degrees. Such a portrait is resistant to any external influences and can last at least 50 years.

Engraved portraits on monuments

Engraving is a more modern way of applying portraits to the surface of a monument. Today, masters use several different techniques, the choice of which depends on the material of the foundation, the budget, the quality required. So, engraving happens:

• Classical;
• Shock-engraving;
• Sandblasting;
• Laser.

The traditional method of engraving is manual. Technology is the oldest. It is suitable for all types of bases. The blanks can be viewed at http://danila-master.ru/. Engraving is performed with a hammer, chisel, chisel. To apply a portrait of this technology, the master must spend a lot of time and effort, paying attention to every stroke. The technique is very expensive. The finished image may differ from the original.

Shock-engraving method involves the use of a special machine equipped with a needle with a diamond tip. After blows on the stone appear microscopic chips. Shock technology contributes to a good relief and clarity.

Sandblasting method - fully automatic. It involves the use of a computer program. The image is transmitted via a stencil. Quartz sand is used as an abrasive. Another great automatic way is laser. It allows you to create not only portraits, but also backgrounds, inscriptions and so on.