"Oasis" - radiators: models, characteristics, reviews

One of the components of the heating circuit is the radiator. Manufacturers offer to sell them in a wide range, which is why even experts sometimes find it difficult to choose. If you look at the statistics, then one of the most purchased batteries are "Oasis", the radiators of this manufacturer are of high quality and reasonable price.

How to make a choice

Having visited the stores of the corresponding goods, you will be able to meet the devices that are most often produced in China, Russia and Italy. Many of them are made for highways, which are characterized by high pressure indices and a large length. This is typical for heating systems in Russia. The technology provides a variety of solutions for radiators "Oasis", it can be the number of collectors, the way of fastening elements and so on. That is why for sale are sectional and panel models.

Characteristics of bimetallic models of radiators of the brand "Oasis"

Oasis products are quite common in the market, the radiators of this company are bimetallic and aluminum. In order to understand the pros and cons of products, it is necessary to familiarize yourself with the characteristics review. For example, bimetallic batteries are made of steel and aluminum. Steel is the basis of the lattice and internal bulkhead. The peculiarity of these models is that they are all composite. This allows you to increase the number of sections to the desired value, which depends on the conditions. Such variants of radiators are calculated for 30 atmospheres minimum, therefore pressure jumps are not terrible for them.

Among the advantages are:

• Inertness to the action of corrosive substances;
• No restrictions in use;
• Increased strength.

As for the last characteristic, it can be noted that bimetallic radiators are able to undergo any hydraulic shocks in the system. However, there are also disadvantages, one of them is expressed in a higher cost in comparison with analogues.

Why choose a bimetal

Choose such radiators because of the completely steel collector; Manufacturing technology, which consists in injection molding; As well as a small volume of coolant, which provides high energy efficiency and low inertia. Bimetallic heating batteries are manufactured using a specific technology, which provides for the final application of a resistant paint in two layers. In the end, you can get a perfectly white color.

Reviews about steel radiators

In the process of manufacturing such batteries, low-carbon metal is used, subjected to special heat treatment, degreasing and applying a protective layer. Such batteries are available in several versions, they can be supplemented by stiffeners. According to buyers, these batteries are sectional and tubular, the latter differ less impressive wall thickness, while the former are not subject to repair, but are characterized by increased strength.

Their cost is much higher, and the elements are connected by welding. Buyers like high efficiency, which reaches 87%. It should be noted also the low inertia, which is expressed in slow heating and rapid cooling, which is typical of aluminum radiators. Users note that the steel radiators are prone to corrosion, so during the off-season, the coolant should not be drained. If you want to choose such heating batteries, then you should take into account the specificity of the crimping, the acidity of the medium and the nominal pressure. Suitable steel radiators for private buildings, as well as houses with individual heating.

Reviews about aluminum radiators

Quite often consumers choose aluminum batteries "Oasis" today, radiators of this type are made by injection molding, the walls have a more impressive thickness. If the technology involves the use of extrusion, then the number of sections can not be changed. As the users emphasize, the aluminum radiator "Oasis" has a protective polymeric layer on the outer surface, and elements of copper are present in the contour. The level of heat transfer is maximum, and if you install such a radiator in a closed system, then the savings on fuel can be 30%. Users emphasize that with the help of aluminum radiators it is possible to achieve a sufficiently rapid warm-up of the room.

Negative characteristics of aluminum batteries

Oasis radiators made of aluminum are sensitive to increased pressure, so they can be operated at 16 MPa or less. The mechanical strength of such products is not high enough, since the metal is soft, so care should be taken when operating. When using aluminum batteries, it is necessary to bleed air from time to time from the circuit, if this is not done, there is a risk of increasing the hydrogen concentration in the pipes. Among other things, the devices must be handled with the utmost care, since the protective layer can be damaged. The described products can be installed in autonomous systems, since central heating lines create conditions that are not suitable for them. Common advantages are low weight and attractive appearance.

Technical specifications of some models

Radiators "Oasis", reviews about which you could read above, are offered for sale in a wide range. Among the most common models can be identified 350/80 (6), which is a bimetallic product capable of heating the area to 10 m ² . If necessary, bimetallic radiators "Oasis" can be supplemented with sections. Dimensions of the model described are 413 x 80 x 80 mm. With regard to the nominal pressure, it is 25 MPa, while the temperature of the coolant is 110 ° C. The number of sections in this model is six, for one of them you will have to pay 385 rubles.

If you want, you can choose an aluminum radiator of the brand SV-500/12, which is a prefabricated unit and is capable of heating up to 24 m ² . The dimensions of the model are equal to 580 x 80 x 80 mm, but the nominal pressure is much less compared to the model described above and is 10 MPa. The temperature of the coolant can reach 100 ° C, the number of sections in the model varies from 4 to 12, and the cost of one of them is 375 rubles.

A wide range of Oasis products is offered today, the radiators of this manufacturer can be steel, one of them is the OV-11/3/04 model, which measures 400 x 300 x 68 mm. This panel radiator has a bottom piping. And it can effectively heat the room area of 8 m ² . The nominal pressure that the radiator can withstand is 16 MPa. As for the maximum temperature of the coolant, it is equal to 120 ° C. The radiator has one section for which it is necessary to pay 2200 rbl.

Feedback on performance

Oasis radiators are popular with modern consumers for the reason that they have many advantages. Buyers are attracted by the excellent technical characteristics of bimetallic models. For the reason that the heating system in a city apartment can give out any surprises by the type of pressure drops, the presence of aggressive additives in water and water hammers, the best option, according to buyers, is the bimetallic model. Such radiators cost a little more, but you can not be afraid of leaks, and the service life is quite high, it can reach 15 years.

Radiators "Oasis", reviews about which are often the most positive, are popular among consumers also because they are a good combination of price and quality. Some believe that this manufacturer is one of the leaders in this field. A number of buyers are quite satisfied with the steel models that are installed in stand-alone systems and have worked without criticism for several years. Heat transfer in such models is high. And the appearance is quite attractive, which is especially noticeable after the house had cast iron radiators.

Conclusion

Heating ovens "Oasis" may be an invoiced purchase, but after a while you will understand that these batteries are ready to last a long time, and in the process of operation they do not provide for the need for repairs. By parameters and weight they are among the best.