LED strip in the kitchen. Backlight in the kitchen with LED strip

One of the most important aspects, which is given special attention in the design of the kitchen, is lighting. It is extremely important to correctly plan the placement of light sources, its direction, intensity and brightness. After all, if its level is insufficient, the room will seem dark, and the furniture - dim.

In addition, the lack of light in the kitchen or its unsuccessful dispersion provokes the overwork of people in the room due to eye strain.

If we are talking about the constant use of the kitchen for its intended purpose, for daily cooking, then the value of full-scale illumination of the working surface can not be overestimated. It, without doubt, should be carefully thought out and qualitatively established.

In view of these circumstances, the LED ribbon in the kitchen is recognized by many specialists and consumers as the best choice for lighting the kitchen.

Modern ways to solve the issue of lighting

The heritage of many years of design development can be considered the use of two types of light sources in the interior of the kitchen: lighting and lighting.

Their functions are obvious. The main task of lighting is the general supply of light into the room, the backlight is designed to perform a decorative role or to facilitate the performance of various specific actions (manipulation with bulk products and knives, cutting small vegetables, looking after the numbers on the sensors, searching for items inside the lockers).

Among the main sources of light are the following:

• Daylight of varying intensity, penetrating through the windows.
• Centralized lighting of the entire room from under the ceiling.
• Ceiling chandeliers, which assume a low location of the lamp directly above the dining area.

Without this light can not do, but it often is not enough. That is why the owners of apartments, houses and offices are increasingly resorting to the installation of lighting:

• The built-in wall or cabinets are spotlights.
• Mounting the LED strip in various ways.
• All kinds of portable lamps and lamps.

LED strip in the kitchen: reasons for popularity

The main argument in favor of LED ribbons is that it is not necessary to plan their placement in advance, draw complex schemes and cut openings in kitchen furniture. LED strip for lighting the kitchen is easily mounted at the very end of the repair work or at any stage of the room operation.

In addition, this type of illumination has such advantages:

• Ecological compatibility.
• Security.
• Durability.
• High degree of intensity and brightness.
• Resistance to temperature and voltage changes.
• Economical.

Optimal choice for organizing kitchen lighting

Improvements and the latest production technologies have led to the fact that the LED strip in the kitchen can be installed practically anywhere, regardless of the angle of the surface, its quality, the presence of moisture or the proximity of high temperatures. The degree of stability of the tapes is determined in accordance with the marking applied during manufacture.

There are tapes, LEDs on which are covered with insulating silicone, so that the inside of the device does not get water. Such tapes can be safely placed near sinks and slabs, they are very easy to clean of contaminants.

Often, a 220V LED strip is used for functional or decorative lighting of table tops, interior space of hanging cabinets, tables in the basement area, suspended ceilings, bar counters.

Basic principles of installing LED lighting

The installation of the LED strip is simple and does not require too much knowledge of the electrical circuits.

Often, the simplest tools (a construction stapler, a soldering iron), insulating materials (insulating tape or special caps), as well as double-sided tape, are often sufficient if the adhesive tape is not applied to the tape itself. In the event that the lighting source is planned to be closed by a profile, tools for fixing it will be necessary: a drill and staples.

To the assembly of the tape proceed after a careful measurement of the surface serving as a base.

The tape is cut to size, the edges are peeled and insulated, glued to the selected surface.

Sometimes a metal strip is used to fix the LED strip on an uneven surface.

Recommendations for the selection and installation of the unit

Selecting the unit for the LED strip, it is worth using the conventional algorithm for calculating its power: it is necessary to find out the power of one meter and multiply it by the length of the tape used.

In this case, you do not need to load the block for one hundred percent. Specialists recommend providing a spare margin equal to approximately 20% of the block's power in case of voltage drops.

Taking into account the specificity of the kitchen atmosphere, it is desirable to choose a moisture-proof unit or hide it in a specially installed box.

Lighting table top light-emitting diodes

The main purpose of almost any lighting in the kitchen is to supply light to the work surface. The ribbon LED 220V perfectly copes with this task.

You can set a few short ribbons or apply one long section. LEDs are suitable for fixing anywhere:

• Under the lower horizon of hanging cabinets.
• On the plane of the wall.
• Directly on the surface of the countertop.
• On the side faces of cabinets and tables.

Stopping on the option, in which the tape is attached to the table top, it is worth considering to partially hide the LEDs by setting the profile. Such a measure will avoid blinding bright light and at the same time will protect the tape from moisture and unavoidable contamination.

To fix tapes with LEDs on the table top it is best to use products with an average or high level of protection against water (they are denoted by the symbols IP65 and IP68).

Fastening of LED tape under hanging cabinets

The method by which the LED ribbon in the kitchen is installed under the upper cabinets has become almost classical.

This is not surprising, because such an approach opens many opportunities for the effective use of many advantages of this type of lighting.

Such an installation of the LED tape does not require excessive accuracy and jewelry accuracy of calculations, the power supply can be easily placed inside the cabinet, and the directional light clearly on the working surface protects the eyes without loss of intensity.

Decorative lighting in the kitchen

Using LEDs to decorate your kitchen is a perfect example of a combination of rationality, practicality, efficiency and aesthetics.

Manufacturers offer the widest range of LEDs for a variety of purposes and with different parameters. Based on the destination and the location of the fixation, you can select LEDs of a certain intensity, power, color, shape and frequency of location on the tape.

Installation of LED tape in the kitchen as a decorative element is not very different from attaching other types of similar lighting. The main feature is the presence of a dimmer. This is a switch that controls the successive change in the color of the LED's shine . The flashing light may also consist of a single color, the intensity of which varies periodically.

The dimmer must be installed together with the power supply of the tape, since wires must be connected to it in the same order.

Bright and cheerful kitchen, every day pleasing to the eye, can raise the mood even on the most rainy Monday. Positive emotions and positive for all members of the family, of course, are worth the effort that will be required to equip the kitchen with LED lighting.