Laser plane builder: how to choose?

If you want to build something like the Leaning Tower of Pisa, then the laser level or the plane builder is not necessary for you. Begin to make the markup by eye, and you will necessarily succeed. Perhaps the result will not be as elegant and beautiful as Antonio Gaudi, but he will necessarily absorb the elements of curvature and non-parallelism of all the architectural elements of your design.

And to get the angles and surfaces minimally contiguous with the horizon line, you will definitely have to use some plumb line or level. For the construction of ideal lines of walls and ceilings, a modern plane builder is needed. The laser device will provide a 100% hit in the horizontal plane and help to get absolute vertical lines.

Further in the article there is information that will help you navigate in the world of modern laser technology.

How laser equipment works

Any modern laser scanner has two main components:

• Source of laser radiation.
• Automatic or manual beam alignment system relative to the horizon line.

The source of laser radiation at the output gives a powerful and thin ray of light. And the alignment system automatically balances this ray relative to the horizon line. In simple models, this is done by special pendulum compensators. The more sophisticated devices use built-in inclinometers and electric servos.

With automatic adjustment, the alignment of the beam occurs without human intervention. The only thing that must initially be done to the master, is to set the laser level to the maximum horizontal deviation of 3-5%. The plane builder requires the same pre-installation.

If the device does not have automation elements, then an integrated bubble level is used to set it horizontally. Alignment is done manually. Most often, these simple laser devices look like long-distance rulers of the ruler to obtain straight lines of any slope.

What is the difference between the leveler and the plane builder

In everyday practice, usually used such an established concept, as a laser level, or level (niveau - French.). To understand the general meaning of this is quite enough. In professional construction for laser marking at long distances and areas, laser levels are used. Plane builders have a shorter beam radius.

This is due to the fact that the leveling device does not build a light line, it gives a point. Due to this, the concentrated energy of the light beam beats further along the distance. And the dispersion of light energy along solid lines of the perimeter does not allow this.

Therefore, where laser marking is necessary at long distances and very large areas, a laser level is used. And in small rooms - the plane builder. The laser beam of the builder draws solid light lines on the floors, walls and ceiling. It is very convenient, although not so long-range.

By the way, a traditional optical leveling device also gives a point, more precisely, a sighting mark. It is clearly visible in the eye of the device. Therefore, when the laser device only works point-wise and does not draw a solid line, the word "leveling" will be more correct.

On sale there are devices that combine both methods of beam construction - linear and point. At advanced models in the complete set with the device enters the special receiver of laser radiation. This allows you to extend the range of the device several times. For example, the laser plane builder Bosch GCL 25 builds lines in the range of 10 meters. With the receiver, the radius of its action increases to 30 meters.

Laser Levels

Most often in construction, so-called rotational laser levels are used. What it is? These are devices in which the light beam moves in a circle by means of a special rotary mechanism. Hence its name - rotational, that is rotating (rotatio - rotation, lat.).

The rotary head is automatically aligned horizontally. The speed of rotation in professional models is regulated by the remote control. Up to a step-by-step motion with a complete stop.

In addition to horizontal rotation, some devices allow operation in vertical mode. That is, the same head of the rotational mechanism describes a full circle with a laser beam in a vertical plane.

To fix the light beam, the package includes special monochrome glasses and a laser radiation receiver. With the help of the receiver, the beam can be accurately positioned on the surface. After that, the marker is marked with a pencil.

Once again, note that laser markers are used to mark large areas. Plane builders are more interesting for smaller rooms. For example apartments.

Laser plane builders

Their appearance significantly increased the speed of construction work and increased their quality. What are they so interesting about?

The laser builder draws solid light lines on the surface. On the ceiling, walls and on the floor. For example, the laser plane builder Bosch GLL 3-80 P draws one horizontal line and two vertical lines. The horizontal line is projected onto all walls of the room, outlining the full perimeter. And the vertical ones go perpendicular to each other, starting on the floor and converging on the ceiling.

In addition to constructing lines, professional models mark one light point below them on the floor, and the other is made on the ceiling. Thus, building a vertical vertical plumb line. For example, such a functional has the laser plane builder ADA 3D Liner 3V.

Most models make a sweep of lines within 120-160 degrees. But a 3D laser plotter has already appeared on the market. Such a tool can draw solid lines without discontinuities in all planes. For example, the previously mentioned Bosch GLL 3-80 P perfectly handles this.

Laser Osepostroiteli

In the title itself, the essence of this device is hidden. He builds static light lines in space - the axis. Osepostroitel does not draw anything on the surface, it projects a light point. Due to this, the range of the beam is much greater than that of the plane builder.

In the old simple models, there can be no automatic alignment. But this is a great rarity. In modern devices, the level adjustment is automatic. And, if desired, the beam can be fixed firmly. This is useful when working with inclined markup.

The device is small in size, so it is very easy to carry on the belt. For the builder, the inverter is a good auxiliary tool, which, if necessary, can replace the plane builder.

What can I do with laser tools?

Everything that was previously done on the construction site using water, bubble or other levels can easily be replaced with laser devices. For example, with their help you can:

1. Install supports, columns and any vertical structures.
2. Collect walls and partitions.
3. Glue the tiles.
4. Mount the multi-level ceilings.
5. Specify the angles of inclination for different building elements. For example, sewerage, livnyavkam or stairs.
6. To exhibit window and door blocks.
7. Align the line of windows in height and horizontally.
8. Install the hinged elements. For example, furniture.
9. Control accuracy at all stages of construction.

And much more. For example, imagine the installation of a door frame. What happened before? Usual metal plummet on the string. You can work with it with good accuracy. But after using a modern laser level, the desire to use a metal plummet completely disappears.

How can I return to the metal plumb line, once I try the modern plane builder in my work? The laser device installed in the doorway immediately draws all the lines along the perimeter. In this case, they are perfectly balanced vertically. Putting a box is a pleasure.

Disadvantages of laser devices

No significant deficiencies have been revealed to date in laser technology. All plane builders and levels work quite reliably. The accuracy of constructing lines and points is very high. Professional laser levels work with an error of no more than 2-3 mm at a distance of 50 meters. This is very high accuracy.

Sometimes there may be defects associated with the quality of the assembly of the device. For example, the loose contact of the batteries in the connectors. For this reason, the batteries may not be fully charged and, as a consequence, lose the charge capacity. But it happens quite rarely.

Laser plane builder. How to choose?

First you need to decide - for what purposes you need a device. From this will depend on the functionality of the tool and its value. By classification, all laser devices are divided into three types:

• Household.
• Semi-professional.
• Professional.

The main differences will be the power of radiation and the ability to build closed circuits. For example, for professional interior finishing, a 3D laser plane builder is very useful. 360 ⁰ circular line drawing will in this case very much in demand.

The main criteria for selecting laser instruments

For domestic use, the household plane builder is quite suitable. The laser beam of the device will calmly draw lines and put the points you need anywhere. The solid contour will lie within 120 ^° . You will have the opportunity to build verticals and horizontals with a single intersection. This is quite enough for home repairs and other household needs.

Semi-professional laser instruments will be needed in the event that you are engaged in repair or construction on an ongoing basis. They have more advanced functionality. For example, they can simultaneously build one horizontal and four vertical lines. Dot. To have in the complete set the receiver of laser radiation.

A professional laser tool speaks for itself. It is the most expensive, the most accurate and the most long-range. With a large number of additional functions that are generally not required in the home.

Laser plane builder. Feedback and recommendations

Anyone who, at least once in his activity, has encountered a laser tool, begins to understand that this is just another level of carrying out any repair and construction work. The markup is done so quickly and accurately that there is no desire to return to the old methods.

The only case when the skill of working with the same water level can really come in handy is checking the calibration of the laser device. This recommendation is desirable to remember and periodically check the setting of the device. Whether it is not enough that.

Laser levels are a new stage in the development of building technologies

Summarizing, it can be said that to date, any laser device significantly simplifies the life of the builder. High accuracy and minimal installation time, with subsequent markup, make any such device simply an indispensable assistant. Including the laser plane builder. Reviews about him and him similar devices are only positive. These devices really determined a completely different, higher and qualitative level of modern construction.