How to weave a bracelet of rubber bands on the machine: a master class

Since the Rainbow loom appeared, needlewomen of various ages have learned to weave jewelry from them for wrists, hair, neck and fingers, using for this purpose special machines or improvised items, such as pencils, slingshots, fingers and so on. However, today there are those who are just trying to learn how to weave a bracelet of rubber bands on the machine. They will benefit from the following master class.

Preparation for weaving a bracelet "fish tail"

"Fishtail" is the most suitable way to create a gum ornaments for those who first wondered how to weave a bracelet of rubber bands on a machine. For beginners, and slingshot. However, if you do not intend to dwell on the simplest technique for creating ornaments from the Rainbow loom, you should immediately purchase a special machine. You will also need the necessary amount of colored rubber bands, a hook and a plastic clasp. The machine must be positioned in such a way that the grooves look at the needlewoman, and the columns of the two adjacent rows are at the same level.

Weaving of the fish tail

The elastic should be crossed with a figure-eight and put on two adjacent outer pins with different loops, and on top of the other two rubber bands, but not yet crossed. Then lower the Rainbow loom on the right peg should be hooked and remove through the top two elements, and then do the same with the loop on the left column. After this, it is necessary to put on two pegs one more elastic band and to remove on it an element which appeared at the very bottom. This weaving should continue until the required length of the bracelet. It is worth noting that the "fish tail" looks more original, if for its manufacture use Rainbow loom of different colors. At the final stage for 4 loops of one end and 2 others, the plastic buckle should be secured. Now you know how to weave a bracelet of rubber bands on a fishtail machine, and you can even teach this skill to your girlfriends.

Bracelet "sprocket" of rubber bands on the machine: preparatory stage and beginning of weaving

The needlewomen who mastered the technique of creating a fishtail decoration and are striving to learn more about how to weave a bracelet from rubber bands on a machine, it is worth paying attention to the "star" pattern. To manufacture this product you will need a special machine, a C- or S-shaped fastener, a hook and about 120 different colored rubber bands. It is worth noting that the bracelet looks more original if its edges are made of elements of the same color, and the sprockets inside are different. Start the weaving follows from the correct location of the machine. So, its average row should be one pole ahead of the two extreme ones. The recesses of the machine are then looked to the left.

Now, more on how to weave a bracelet of rubber bands on the machine. To cast multicolored elements on the bars, start with the right edge. First, using the Rainbow loom, you need to connect the protruding bar and the one below it, then the 1st and 2nd pins of the bottom row, then the 2nd and 3rd. Similar actions should be continued until all the columns of the extreme rows of the machine are connected with rubber bands. It will be the edging for the future bracelet. In this case, the last two columns of the extreme rows remain unactivated, since at the end of the bracelet the same corner as in the beginning should turn out. It is worth noting that the information on how to weave bracelet from the rubber bands on the machine, for beginners is not too difficult, the main thing is to show a little patience and spend the right amount of time.

Bracelet made of rubber bands: weaving of sprockets

Now you can proceed to create asterisks, each of which is better to make different colors. To do this, on the second middle row and the far right rods you should throw an elastic band. Then clockwise it is necessary to continue to throw Rainbow loom, connecting the center of an asterisk with the columns located around. When all 6 elastics are in place, it is necessary to proceed to create the next asterisk, the center of which will be the 4th column of the middle row. Weaving should continue until all pins are used. For a better understanding of how to weave a bracelet of rubber bands on the machine, look carefully at the photo below.

For the convenience of work and the original appearance of the finished jewelry to create each star, it is better to use elastic bands of different colors. It is worth noting that the last extreme rods will remain unused. Next, on each column of the middle row, which acts as the center of the asterisk, it is necessary to throw a rubber band, folded by a figure of two.

Removal of loops and the end of weaving bracelet "star"

The machine must be turned in such a way that the notches of the pins are facing to the right, and the following steps are taken: using the hook, remove the lower hinge from the last rod of the middle row and put it on the front column. Continue weaving in a similar way until all the loops of the middle row have been thrown over to adjacent bars. Then the middle gums of each star are alternately transferred to the pins that they connect.

When all the internal elements of the bracelet are ready, it remains only to weave the fringing, for which the elastic bands were thrown back at the beginning of the work. So, each lower loop of one column should be thrown on the leading pin. Begin work should be from the protruding pint of the middle row and go to the bottom, and then from the same point weave the upper. If it's hard for you to understand how to weave a bracelet out of rubber bands on the machine, the photo below will help in this.

At the final stage, with the help of a hook, through all the protruding loops, it is necessary to pass the elastic band, and, fixing both ends on the hook, gently remove the finished bracelet from the machine. After that, the product must be straightened. Attach the clasp to its extreme loops.