Everyone knows that the sea knot is one of the strongest knots. But not everyone knows what kinds of these ligaments exist, and there are not a few of them. To learn how to tie a sea knot, you should consider all its types.
A gypsum unit is necessary at the moment when it is necessary to lift the load, and there are no lines at hand. To create this bundle, you will need a cable - steel or vegetable. The principle of the action of the node is as follows: when the end of the ovary receives a load, it is pressed against the hook, namely to the inner neck. The loop, which is tightened around the back, fixes both ends. It should be understood that the root end of the node must pass over the running gear. In addition, the running end of the rope should be tied to the root end. It is necessary that at the most crucial moment he does not come off. By the way, it is possible to raise the bag without a cable, using a similar unit. The button is thus made so that the neck of the bag is wrapped around the hook once.
The cat's paw is used in cases where the slings are attached to the hook so that there is no excess slack. How to tie a sea knot of this type? The loop of the sling should be placed on top of both ends, thus obtaining two not very large loops. Each loop should be twisted at the same time. The number of twists will depend on how much you need to reduce the sling. Then loops must be put on the hook.
The barrel assembly is necessary to lift the full and open barrels in a strictly vertical position. In the middle of the cable, you need to tie a small bundle. Half-loops need to be spread apart so that they sweep the barrel in the middle. One part of the loop must be passed through the bottom of the load, and those ends that remain free, should be connected by a straight knot. If one end remains vacant, then it should be secured with a chat room.
The pile knot is necessary for punching some strands of the rope, for leveling the eyelets and for performing a variety of works with the canvas. How to tie a sea knot of a pivot type? Such a node does not represent any complexity. It is only necessary to understand that he must tightly clasp the object.
In addition, the subject must be pulled out of such a node very easily. With the help of such an ovary it is possible to fasten mooring lines to the palms, and also to attach special rope fences and build bridges.
Knot peg (in other words, "lamb leg"), received its name, due to the external similarity with the eponymous part of the animal. Used in the event that you need to reduce the length of the cable for a while. In addition, if the strength of the rope is in doubt, then this sea knot can be applied . The scheme of its creation is not too difficult to understand. But some points should still be taken into account. For example, do not forget that this ovary acquires its strength only when the load is lifted. In other cases, he may untie.
Varieties of ovaries still very much. If there is a desire to learn about how to tie a sea knot, you should carefully approach the study of each species. Otherwise, the strength of the loop will be questionable. Perhaps it is worth studying in practice, what is a marine node ?