How to remove the Nokia lock code: an emergency!

For many years, the mobile phone is not seen as an expensive toy, but as a necessary thing in everyday life. And because any failure of the device in operation can not only cause the owner negative emotions, but also cause a violation of the labor process, etc., and this is no longer a joke. From such misunderstandings, no, not even the coolest brands and models are insured.

For example, the mobile phone was frozen on a lock: the security code was forgotten or it did not know at all, if the phone is "cheap", it was bought from hands, and the new owner did not ask for the required figures. The company is well-known and loved by many Nokia. How to remove the lock code Nokia? People who have encountered such a problem know that trouble can be remedied, although sometimes one has to tinker.

So, to remove the lock code Nokia at home, you can use at least two options.

Option one: the method of "scientific" poking.

1. If the mobile phone is turned on, it should be connected to the computer via PC Suite. Then you can remove the security code Nokia, if it is requested immediately after turning on the device.
2. You should download the JAF Setup utility, drivers for it come from any boot disk from Nokia.
3. Turn on the phone, find what its resistance is. It can vary from model to model.
4. Next, you need two small, centimeters to 30-t, wires and two conventional sewing needles.
5. The whole design is connected in such a way: a needle, postings, resistance, postings, a needle. Consistency must be strict! The power is connected from 3.6 to 4 V. The connection is given to the + and - buses, or the BSI contact is isolated from the battery contact. Between the contacts of the batteries Cnd and BSI, those 2 needles are inserted. Then press the power button of the phone. The device itself should not twitch, vibrate, so that the needles do not fly out. A few seconds after power-on, the display should indicate the type of "local mode" or "Test mode" that the experiment was successful.
6. Next, use a USB cable to connect the phone to the computer. The latter should define Nokia as turned on and working normally. We install drivers through the computer. Next, you need to install the JAF program, open it and press "start".
7. The next step is how to remove the Nokia lock code - go to the tab bb5. There, near the item Read User Code, check the box and click on Service. When a new dialog box appears, click on the "Read Code" item.
8. When the operation is done, the program will write the machine code to the left of the button
   Read Code.

Note: this method is good for mobile phones created on BB5 platforms.

Method two: "software"

This method is also used at home, although, how to remove the lock code Nokia, they know, of course, in the workshops with the salons of cellular communication. But the appeal to them is worth the time and money, and most you can do everything operatively and for free, which is beneficial in itself.

So, another way to "revive" - using the program Mbro USB Nokia Tools Lite. It will come in handy if the phone asks for a password before it is turned on, and the computer can not be connected to it. Then you can try to get the lock code in this way:

• The program needs to be installed and unzipped, run.
• Then connect the phone via PC Suite.
• On the button with the microphone, the cursor is hovered and pressed on it.
• In the program window, the last line contains the same security code that was needed. It should be entered into the phone to check operability. And, in addition, the code is better to write down, so you do not have to fight with the phone again.
• This way, telling how to remove the lock code Nokia, as well as the password, is suitable for those phones that are fully turned on. The program itself runs on computers where Windows XP or Winows7 is used as the operating system. And as phones, respectively, the model of smartphones Nokia N79 and Nokia 6300.

In the end, the phone can be formatted if other options do not work. But this is an extreme case. Although, then you can completely update the software, put a different, more interesting operating system, various utilities and get, ultimately, a new model, even more perfect - just to "pull" the filling, i.e. "Insides" of the mobile phone.