How to remove the blockage in the bathroom, in the kitchen? Eliminate litter in the sink at home. Eliminate pipe clogging at home

If the water has become quite bad and slowly passes into the drain, and the room is constantly filled with an unpleasant smell from the sewer, then it is urgent to take appropriate measures.

Owners of apartments and private houses try to solve this problem on their own, so you can save money. But if the clog is old and can not be eliminated by improvised means, then you can turn to a specialized company whose employees use special hydraulic plants. With their help you can solve the problem in the shortest possible time.

Using the plunger in the bathroom

If there is clogging in the system, it can be eliminated using one of the traditional methods - the use of a plunger. The use of this tool can be accompanied by some difficulties, since the structure of the drain complicates the process. The problem is getting into the air hole at the moment when the water overflows, and for work you need a vacuum.

Advice of a specialist

If there is clogging in the bathroom, how to eliminate it, you must decide as soon as possible. So, when the described procedure is used, the plug must be tightly closed with a hole for water overflow. After the edge of the rubber bowl is smeared with petroleum jelly, which will allow them to be pressed tightly to the drain. The master must carry out 10 sharp reciprocating movements.

For reference

Once there is a clog, you can try to eliminate it with the help of two air vents, but this will require the help of another person. Instead of a plug to create tightness, you can use one more plunger.

If the positive result is not achieved, then we can use not the strength of the air, but the strength of the water. To do this, the bath is filled with hot water so that half of the rubber bowl is closed. At the same time, the plunger is immersed at an angle, and at the last rolling it must be sharply pulled out of the water.

If the first attempts to get rid of the problem failed, then the procedure can be repeated several times.

Use of a plumbing cable

When there is a fairly large clog, to eliminate it with the help of the above technology is unlikely to work. At the same time, you can use a plumbing cable that will allow you to push or pull out foreign elements that are far away in the pipe.

Manipulation should be done in several stages. Initially, the cable is inserted into the drain hole. In this case, two people must be involved - one of them pushes the cable, while the other performs rotational movement with the help of a special handle.

As soon as it is possible to reach the clogged place, it is necessary to make some sharp jerks forward and back, then to open the hot water tap, and to take out the cable. The streams will help wash away the sewage stuck in the sewer pipe.

Than it is possible to replace a cable

A fairly large and old blockage can be eliminated with a cable, which must necessarily be rotated. Only in this way you can cope with the problem. You can buy this tool at any hardware store, but some craftsmen make it yourself.

To do this, use a piece of flexible metal cable, which bends and slightly dissolves at the end. Thanks to this manipulation, he will move along the bends of the pipes and will not rest against knots like the knees. And in order for the cable to be more convenient to use, intercepting in the process of work, it is best to wrap it with something hard, so you can get a kind of grip.

Clogging in plastic pipes can in no case be eliminated by using a plumbing cable, since their internal surface may be damaged.

The use of chemicals in the kitchen

Eliminate pipe clogging at home, sometimes necessary in the kitchen. To do this, chemicals are most often used. However, it is important to know which one is best to buy, and also how to use it.

In the manual, you will find recommendations that require the use of a certain amount of composition, which is poured or poured into the drain hole. There it must be left for a while, and then thoroughly rinse with water. It is important to follow the manufacturer's recommendations, otherwise even the safest preparations can cause deformation of the material.

We offer a list of the most effective means:

1. Perhaps the most common is the "Mole", but it is forbidden to apply it to plastic pipes.
2. For all types of pipes you can use "Mr. Muscle", which is available in the form of foam or gel. A special structure penetrates into all the nooks, eliminating bacteria and odors.
3. If you do not tolerate the smell of ammonia, then you can use "Tiret", which copes with its task excellently.
4. If there is a need to eliminate a strong clog, then you can buy "Pothan", which has a strong chemical composition.

How to get rid of fat deposits in the siphon

It is also possible to eliminate pipe clogging at home by boiling water, however, this method is acceptable for all types of pipes, except for plastic pipes. When the cause is fat deposits, this will prove to be an effective solution.

If you have plastic pipes in the kitchen, then in moderately hot water you need to dilute the detergent powder, and then stir the solution well. Then the stream poured into the drain of the shell. If necessary, the entire procedure can be repeated. To avoid such a trouble, every time you wash dishes, you need to drain the hot water, leaving it for 20 seconds.

Cleaning of corrugated pipe

If you have wondered how to eliminate blockage in the kitchen, you will need to perform the actions in a certain sequence. On soak regularly on the inside surface of corrugated pipes soap deposits and fat will settle. To solve this problem, you should:

1. Unscrew the tube from the funnel that is in the sink.
2. The upper pipe must be disconnected from the drain to the sewer.
3. After that, you can carefully remove the siphon, which is also called the cranked fold.
4. Removing clogging in the sink at home can be done by stretching the removed pipe so that all faces are straightened. After that, its inner surface can be washed with water.

If you want to make a more thorough cleaning, then it is recommended to do this with a rope and a piece of cellophane. One end of the pipe closes, and hot water is poured inside. After that, the second end closes on the same principle, which will allow the element to be cleaned by rotational movements when water is inside. As soon as the cleaning is completed, all the elements must be replaced.

Elimination of clogging in the toilet

If you are faced with the question of how to eliminate blockage in the toilet, act with the same tools that are used in the kitchen or in the bathroom. As you know, chemistry does not have a noticeable effect on old clogs, so it's best to use a plunger.

It is necessary to choose an adaptation with a bowl diameter of 10 centimeters. To work effectively, excess water from the toilet should be removed so that the liquid covers only the rubber part. In order not to encounter the problem of tool jamming in the receiver, it is necessary to use wallpaper carnations, which are nailed in the area of the bowl-handle connection. If you do not know how to eliminate the blockage in the toilet, when there is no plumbing at hand, you can use the improvised means, among them one should pick out a plastic cut-off plastic or a doll-crush.

In the first case, the element is lowered into the toilet bowl, and then with its help reciprocating movements are carried out. The pusher can be made of rags and sticks.

But if you use a cable, it sometimes encounters an obstacle, and further actions may be different. If the element rests on the opposite side of the bowl, it is necessary to continue forward movements before removing the blockage, until the cable slips on the inside of this section of the toilet bowl.

If on the way there was a vertical wall of drain, then you need to use a cable, the length of which is 1.5 meters or more. If there is a plumbing fixture with direct outlet, the cable should be pushed through the horizontal pipe. As soon as you come across an obstacle, this will indicate that the track has reached a clog.

When the task arises, how to eliminate blockage at home, it is important to familiarize yourself initially with the design features of sanitary equipment.

Chemical method

In the absence of a plunger, you can use another technology that involves the use of chemicals. Excess water should be drained from the bowl, you should leave some liquid in the drain. Next in the course is soda, which will need 1/2 pack. It should be pushed as deep as possible, and after pour a glass of vinegar. Then the reaction will begin, which will last about 20 minutes. In conclusion, a kettle of boiling water poured into the toilet.

This method is not suitable for plumbing fixtures in which the corrugation is made of thin plastic, as it can burst. Washing in this case it is better to conduct not with boiling water, but with hot water.

In order to periodically not solve the problem of how to eliminate clogging in pipes periodically, it is necessary to carry out preventive work from time to time. They can be conducted on the basis of one of the technologies that have been described above. It is best to use chemical compounds, as this will be easier and faster.

Helpful Tips

Before you remove the blockage in the bathroom at home, you must prepare rags. It should be laid out the cable after it is removed from the sewage system. It is recommended to wipe it with a cloth soaked in a detergent solution. This will eliminate unpleasant odors.

If there is clogging in the bathroom, how to eliminate it, you must decide, depending on the improvised means that will be found in the house. However, it is necessary to have gloves, which the master must wear before starting work. Otherwise, it is not possible to wash off an unpleasant smell from the hands long enough.