How to properly charge the phone's battery to increase performance

Since the advent of mobile communication devices, it has been said so much about how to properly charge the phone's battery, which is quite possible to publish a medium-sized book. However, as they say, it's still there. The thing is that it turns out a paradoxical situation when those owners who were able to figure out how to properly charge the phone's battery cease sharing their observations and experience with the community, since life poses other problems, and it's not enough to return to the solution already solved each. Accordingly, newcomers have to "stuff bumps", learn from mistakes and repeat the path of their predecessors. This is such a vicious circle. In order to help somehow to understand this topic, today we will consider a number of key points and answer the questions, how much to charge the phone's battery and how to "swing" the battery.

Myths and Facts

When buying a new mobile phone, many sales consultants recommend conducting a kind of training of the energy source - three times to repeat the full cycle. It is suggested to completely discharge the battery, that is, wait until the device turns off. Then put it on a charge lasting from 8 to 24 hours (tips, as can be seen, can be very different). After that, again, wait for the mobile device to turn off due to the loss of battery power and repeat the above procedure. In the sum of charge-discharge cycles there should be three. Very often, when asked how to charge a new phone battery, this is the answer. Alas, in fact, miracles do not happen, and such manipulations are not only superfluous, but in some cases harmful.

How to properly charge the phone's battery : everything is simple

In charging lithium-ion chemical power sources there is nothing complicated. We recommend that you read and follow the instructions to the device. Usually this is enough to maintain a balance between the charge and the total duration of use. However, every mobile device owner can slightly improve battery performance.

Optimization recommendations

As is known, the lower the charge current, the more efficiently it fixes its carriers in the chemical elements of the supply. In other words, if instead of regular charging with a high output current (now often even 1A models are used) to connect the device to the device, designed for small currents (up to 300 mA), then although the charging time will increase, the operating time of the device will pleasantly please you. However, since in the batteries now install a controller that controls the currents, expect a significant increase in the actual capacity should not be. Usually the increase is no more than 10%.

For lithium-ion batteries, normal operation is work at voltages from 2.7 V to 4.2 V. Exceeding the upper limit or decreasing below the permissible level sharply reduces capacity due to the course of irreversible processes in the battery. Thus, considering how to properly charge the phone's battery, it is very important to remember that you can not bring the device to full shutdown, because due to natural self-discharge, the voltage drop can turn out to be critical in time. If the phone still turns off, you should charge the battery as soon as possible.

Many have paid attention, that at purchase the accumulator is charged approximately on 50%. This is not an accident. It is within the range of 40 to 60% that the optimal storage regime is achieved. The conclusion is the following: without the need for a long time not to use a mobile phone, you need to ensure the accumulation of charge to the specified boundaries.

And, finally, do not immediately after the signal about the end of the charging cycle, disconnect the unit from the network. The integrated controller provides a "drip" charge of the battery, which has a positive effect on the duration of its operation. Thus, 2-3 times a month it is useful to leave the phone on charge for a longer time than it is required.