How to make aviary for rabbits: detailed instructions, drawings and recommendations

You can keep rabbits on the plot of land in various ways. A few years ago, these animals were bred mainly only in cages. In recent years, the owners of mini-farms have become increasingly popular with the aviary method of keeping rabbits. The main advantages of this method are the rapid growth of livestock, reduction in attack and time saving of the fur farmer. Make a convenient enclosure for rabbits in the garden. You can also do it yourself.

What materials will be needed?

For assembling the enclosure, you first need to prepare a bar 50x50 mm. This material is necessary for making the frame. Actually, the fencing itself is simpler and cheaper to make out of the rabitsa. The usual mesh of this variety rusts very quickly. Therefore, if the owner of a household farm wants the rabbit to serve as long as possible, he should buy a painted rabitsu.

Also for the manufacture of enclosures for rabbits will need consumables - nails, screws self-tapping screws. In addition, you will need to prepare cement and sand. For the construction of the shed you need plywood. If rabbits are supposed to be kept in winter, you should also purchase mineral wool. For the roof you need a roofing felt and boards.

What tools are needed

In order to build a rabbit enclosure, in addition to materials, you need to prepare and tools:

• Screwdriver;

• Hacksaw;

• a hammer.

On hands it is necessary to put on gloves. Next, let's see how to make an aviary for rabbits correctly.

Scheme of the enclosure

The design of this rabbit can be different. For a small number of animals, a small enclosure is set up, which is a frame made of a bar, assembled in the form of a parallelepiped, covered with a rabbit and covered with a wooden roof. The floors in such an enclosure are usually made of wood.

If rabbits are supposed to contain a lot, it makes sense to collect aviary for rabbits of a large area. In this case, it is mounted approximately on the same technology as the conventional rails from the mesh-netting. The roof for a very large enclosure made of boards is, of course, problematic. Therefore, in most cases, rabbit breeders leave such paddocks open at the top. Or they also tighten them with a rabbit.

Under this scheme, you can quickly make a very convenient aviary for rabbits with your own hands. A drawing of this construction can be seen below. In order for the animals to hide from the rain or the scorching sun, on one side a shed is attached to such enclosure.

The content and breeding of rabbits in cages has some peculiarities. In some cases, owners of household plots start all animals inside immediately. But it is much better to make inside the fenced out compartments for male producers and queens with small rabbits. This will control the reproduction of animals.

Stages of installation

Mounted aviary for rabbits in several stages:

• On the perimeter of the walk are piled posts;

• The supports are connected with each other by a bar from above and from below;

• On the perimeter of the enclosure a ditch 70 cm deep is excavated;

• The mesh-netting is mounted.

As a result, at the end of the work (after filling the trench), the mesh will be buried in the ground. And consequently, rabbits can not make a dig and escape. Some owners of homestead plots do not deepen the rabitsa into the ground, but simply dig a shallow pit inside the enclosure and pour it with concrete (with a slight bias). After solidification of the cement mixture, a layer of earth approximately 20 cm thick is poured over the resulting "floor." Of course, rabbits will not be able to dig through the concrete either. However, this method, of course, is suitable only for small walks.

The maintenance of rabbits in large cages assumes, as already mentioned, the arrangement of a shed. The latter is also assembled on a frame. Mineral wool is installed between the inner and outer layers of plywood. It is not necessary to make a barn large and tall. It is enough that the rabbits inside can freely stand up in a "column". The entrance to the barn is made so that the adult animal can enter freely into it. If there are many rabbits, several entries are worth making. The inner part of the barn, located opposite the fenced areas for the producers of the enclosure, must also be separated by a partition.

Build technology

Begin to perform work from the assembly of the shed. First knock down the frame of the necessary size. Further, floors are filled from the boards, the plywood is lined with plywood inside and the partitions are installed. Then mount the mineral wool and waterproofing. After that, the shed is lined up outside. Then they make a roof, also insulated with cotton wool. It is easiest to coat it with a roofing felt. Mount the roof to the back of the shed on the hinges.

Then they arrange the aviary for rabbits. Supports are installed in a trench excavated along the perimeter of the enclosure. Connect them with a bar along the perimeter at the bottom and at the top. Then proceed to erecting the rabitsa. Mount it to the wooden posts the easiest way with nails (bending them with a noose). After the fence is ready, the trench is covered with earth or rubble. At the next stage, a bar under the upper mantle is fastened to the strapping of the frame.

Of course, you need to make wickets in the enclosure. They are also collected from a bar and covered with a rabitsa. Separate wickets are made in the departments to the manufacturers. Suspend the resulting door can be on the usual hinges.

Equipment for walking

The content of rabbits in cages is a relatively simple process. First of all, in the paddock and the shed you should spread the straw. The floor of the shed can be closed to her immediately. In the enclosure, such a litter will have to be done after the rabbits launched into it eat up all the grass. Feeders are usually installed only in the range. Make them the easiest way from a sheet of plywood, nailing along its edges, rails-sides. Drinkers should be fixed to the bar and in the enclosure, and inside the shed. To young rabbits do not try to dig holes, in different corners of the walk you can put small closed boxes with holes in their holes.

Conclusion

That's how the aviary for rabbits collects. The content, cultivation and reproduction of these animals in such a vagina will certainly be successful. After all, in an aviary rabbits usually feel much more comfortable than in cages. And consequently, they grow and develop much better. If the owner of the household plot carefully considers the choice of the supplier of feeds, his animals will, among other things, never become infected with any infectious disease.