How to make a room fountain?

The indoor fountain is a stylish decoration of the room. Such an accessory gives peace and tranquility. In addition, the product allows you to revitalize the interior. Made by own hands, it is much cheaper than purchased. Such a fountain will have a unique structure. The performer can realize his boldest fantasies.

Create a project

Before you begin to make a room fountain, you should carefully consider its design. This applies to the shape, and the number of tiers, and sizes. Do not forget about the basic principle of any fountain. The water in the structure must always circulate. Otherwise, the product will not work. The project is best depicted on paper, indicating the exact dimensions. After that you can think over all the details. First of all, it is necessary to count the number of necessary building materials and tools.

What does the indoor fountains consist of?

Photos of finished products are impressive. Such designs will fit into almost any interior. In general, the room fountains consist of:

1. Hermetic capacity. For this, a bucket, a flower pot, a bowl, a flower pot and so on.
2. Water pumps. In this case, you can use the aquarium accessory.
3. Decorative elements: seashells, stones, LED tape and so on.

Near the fountain there should be an electrical outlet. After all, the pump works only from the network.

Installing the pump

When making a room fountain with your own hands, you should consider the location of the water pump. It is necessary to eliminate the risk of the whole system working without liquid. It is best to install the water pump at the lowest point of the entire structure. Otherwise, the indoor fountain will not work correctly. The water pump must be installed on the bottom of the sealed container. To do this, use the suction cups that come with the pump for the aquarium. Also it is possible to apply for fixing the pump adhesives made on the basis of sanitary sealant. In this case, liquid nails are ideal. To make the water go up, you can use silicone tubing. To do this, the part must be put on the pump outlet and then installed in a vertical position.

What to install the fountain?

How to make a room fountain original? For this, the structure must be decorated. After installing the pump and pulling out the tube, you should create something like a slide that will hide the sealed container. For the manufacture of such an elevation, stones suitable for diameters ranging from 5 to 7 centimeters are ideal. On the finished hill should be installed capacity. It can be fixed with epoxy glue. To create an elevation, you can use any material that is suitable for making the frame. In any case, the outlet tube should be in its original position. If necessary, it can be reduced in size.

We set the upper capacity

As for the upper tank, it can be made in the form of a shell, a metal plate or an old clay cup. To make the room fountain look more original, you can use an old jug. Before installing the tank, it is necessary to make a hole in its bottom. Its diameter should match the dimensions of the silicone tube. It will need to be introduced into the reservoir cavity by about 0.5-1 centimeter. Surplus can be simply removed. For reliable fixing, as well as for sealing the structure, only waterproof adhesives should be used.

The final stage

The final stage is decorating. Fountains for the house room can be decorated with shells, small pebbles, artificial plants intended for aquariums, and other materials. The design of the structure must fully correspond to the interior of the room and harmoniously fit into it. You can decorate a room fountain by any means. For lighting, you can use a variety of LED stripes. The indoor fountain is easy to clean. In order for the structure to function normally, it is necessary to monitor the water level. Liquids should be sufficient for full circulation.