How to iron the shirt properly. Tips for young housewives and lonely men

Appearance depends not only on the quality of clothing and its conformity to fashion. One of the main points is the neatness of the things put on. Shirt - this is one of the important accessories in the wardrobe of any man. It must be a quality thing that corresponds to the occasion. But its appearance depends on proper care. Wash the shirt in accordance with the directions on the label. But important is how to iron the shirt properly.

First of all, it is necessary that the iron was with a surface of stainless steel. It is better to glide over the surface. It is better if the iron has a steaming function that can come in handy.

Before you iron the shirt, you need to determine what kind of fabric it is sewn. This is very important, and the ironing regime depends on it. This information can be read on the tag.

As practice shows, it is most convenient to iron shirts that consist of a mixture of fabrics. It's cotton and polyester. Choose the temperature of 110 degrees and, slightly pressing on the iron, ironing thing. In this case, the steaming mode is not required or required in small quantities.

Viscose things are also easy to clean. They are stroked at a temperature of 120 degrees and do not press the iron hard. On this material stains from water easily remain, therefore it is necessary to apply only steam.

It's harder to iron shirts from natural cotton. Here it is necessary to exert more effort, at a temperature of 150 degrees and a large amount of steam.

The same requirements apply to the ironing of cotton and linen shirts. Only the temperature of heating the iron should be set at around 200 degrees.

Linen items also require a strong pressure on the iron and a temperature of 230 degrees.

Shirts of compressed fabric are ground at a temperature of 110 degrees and without the use of steam.

Well, and finally, a few recommendations on how to iron a shirt from a dark cloth. To ensure that there are no traces of iron on it, you have to iron it from the wrong side. But if there is a need to iron the fabric from the face, it is better to use only steam or barely touch the iron of the shirt.

Having dealt with the kind of fabric, we turn to the very process of ironing. I must say that ironing shirts is better if they are not slightly dried. But in the case when the fabric is overdried, you need to use additional moisture. For this purpose, the atomizer is suitable.

Firmly moisten the fabric. First of all, iron small details. Start with the collar. It is stroked from the corners to the base on each side.
Then go to the sleeves. You can use a special device for smoothing the sleeves. If not, place the sleeve on the ironing board and level it well. Now start driving with the iron on the share thread from the middle to the edges. Make sure that no creases appear. The cuffs also need to be ironed.

Next, we put the shirt on the board for ironing the face of the backrest up. We iron her tissue. Fold in the middle, we make symmetrical.

The story of how to iron the shirt is almost complete. It remains to iron the shelves. We spread one of them on the ironing board and gently iron it. A shelf with buttons is ironed without touching them. Otherwise, you can damage the buttons with an iron.

If you have taken into account all the recommendations on how to iron the shirt properly, you will get a perfectly ironed thing as a result.

Now you need to hang it on the hanger, do not remove it in the closet, and let it cool. After that, you can safely send it to the closet.

And finally one more rule. It is considered a bad form to smooth the arrows on the sleeves of the shirt. Therefore, if you are not going to put a jacket on top, then smooth out the sleeves without the arrows.

Patting a shirt is not difficult. But you need to show a little patience and accuracy, so that it does not leave traces of iron or burned places. In this case, the shirt will be hopelessly damaged.