How to install a shower enclosure: the features of the process

The shower cabin has long become a sought-after piece of the bathroom interior. The fact is that it is an alternative product that can be used in a small room. However, you need to understand how to properly install the shower. Naturally, you first need to choose it. To do this, you need to determine the type of product, its shape, material of manufacture, as well as dimensions.

If you do not know how to install a shower cabin, then do not be afraid of this process, since it is quite simple. First, read the detailed instructions that come with the product. Then decide whether the cabin will stand in place of the bathtub or next to it. You may need to make some changes to the layout of the room. Assembling the product is not difficult, you just need to make sure that the kit contains all the details.

So, before installing the shower, inspect all the elements. You should have metal stands in the kit, from which the frame of the product, side panels and rear wall (depending on the shape and type of construction), a roof, a door, and also a tray through which the used water will be drained will be constructed.

In order to install the cab, it is necessary to pre-assemble it. To do this you will need a screwdriver, a silicone sealant, flexible corrugated hoses, a shower, a mixer, a drill, a construction gun, and a level.

The first step is to strengthen the pallet. Naturally, before this, all flexible elements that are responsible for the supply and removal of water are installed. The best option is to position the pallet directly above the sewer hole. You may need additional support elements. To fasten the pallet it is necessary on a qualitative glue or a cement grout. Hoses for draining should be located at a small angle.

Next, before installing the shower completely, assemble the frame of the future product. Do this with the use of a building level, so that later you do not have problems with opening or closing the door (especially if it is sliding). After that, you can fix the back and side panels.

For additional fixing, it is possible to process the joints of the glasses with the frame with silicone sealant, which is also an insulator. Securely fix the panels with self-tapping screws, for which special holes are provided in the profile.

Install the shower with your own hands is very simple, if you do everything in accordance with the instructions. During work, try to tighten the screws without excess pressure, so that neither the glass (plastic) nor the metal profile crack. Now it remains only to install the door correctly and evenly, seal all joints and wait for the silicone to harden.

Lastly, you should check the operation of the cab, lighting, additional functions, mixers and shower. If there are any problems, they must be eliminated. Now you know how to install a shower. Good luck!