How to glue the foam to the foam? How to properly glue the foam to any surface

Such a lightweight universal material, like polystyrene, has become very popular in the role of insulation of premises for a very long time. As it turned out, it can be used both as an element of design, and for the production of small decorative objects. As for the craftsmen who are warming their house, and before the "self-made" ones, the question arises as to how to glue the foam plastic to the foam plastic.

To be warm and not only

Many citizens in the post-Soviet space have to live in apartments such as "Khrushchev" or "brezhnevki." What good is the house built in those days, except that they are, a small area of apartments and their densely populated? Correctly - remarkable sound permeability of walls! Unfortunately, not everyone likes to learn the latest neighborly news, penetrating through the walls at night. These citizens try to separate from the house collective, by any means isolating their premises.

The method of insulation with foam sheets has a sufficient number of advantages. Among them are the following facts:

• Light, almost weightless material;
• Has a small thickness;
• Has excellent sound and heat insulation properties;
• Simply mounted;
• Can be used both inside rooms and on the facade of houses.

Only one can cause controversy and doubt. It's a question of what to put a foam on the wall.

On concrete, on a brick and on a tree

Attach the polystyrene panels to almost any basis. Do not always use only adhesive compounds. Most often used and adhesives, and mechanical fasteners. It depends on which side of the room the work will be carried out. If the sheets are mounted on the facade, then use a double fastener: adhesive mixture and "umbrella" dowels.

How can I glue the foam to a brick or concrete base from the outside of the house? The mixture must be resistant to wind and precipitation. In addition, the composition should not contain gasoline, acetone and other solvents that simply "eat" the foam panel before holes.

How to glue the foam to the foam? It is not recommended to use a mounting foam for these jobs. Blowing up and expanding in the process of solidification, it can deform the plates.

When working with wood, plywood or plasterboard use the same mixtures as in other cases. What can I put a foam on? Usually, the wizard uses the following tools:

• With liquid foam;
• Liquid nails (especially for this material);
• Concrete-free anhydrous mixtures;
• Silicone sealants;
• Compositions for tiles;
• Special glue-foam.

How to properly glue foam to the ceiling or wall

At work, the glue is applied only to the expanded polystyrene tile. The surface of the ceiling or wall must be dry and clean. The composition is arranged on the sheet by strips (for air outlet), if the trimmed area has an uneven texture. With an ideal main surface, with liquid nails or foam, perimeter the tiles with a small indent from the edge. A small amount of the mixture is applied to the center of the panel. When fixing a large-sized sheet of foam, glue the perimeter of the perimeter, approximating gradually to the center of the sheet. On the sides of the glue, they are applied in a zigzag manner with a thin layer.

After applying the composition, the panel should be set aside for a few minutes. After a short exposure, the slab or panel is applied to the desired place on the wall or ceiling and carefully pressed against the base and adjacent tiles, fixing for a while. If the work is done on the ceiling, it is convenient to use a conventional rolling pin. Surplus adhesive composition immediately removed with a spatula or other device.

When insulating the outer surface of the house, additional fastening of the panels is carried out using dowels-fungi. The seams between the tiles must be carefully filled with the same composition as the panels.

How to prepare the main surface

In order for the result to be qualitative, there is little knowledge of how to glue the foam to the foam. If the wall is crooked or dusty, all labor can vanish in vain.

First, it is necessary to remove or seal up all pits and protuberances.

Secondly, the surface is peeled from the remains of paint, various peelings and residues of glue or plaster.

Third, they cover large and small cracks.

Only after thorough cleaning from any layers, dust and dirt can you start the main work.

Than to glue a foam plastic to a foam plastic at manufacturing of various design features? The same compounds as when repairing your house.