How to connect a computer to the TV through the "tulip"? Connecting the computer to the TV via RCA ("tulip")

In this article, let's try to talk about how to connect a computer to the TV through the "tulip", let's highlight the main points and the preliminary setting of plasma panels and LCD devices. The synchronization procedure may differ in some cases, but mainly depends on the type of video card of the computer, the installed operating system and the TV model.

In addition, there are still quite a few important moments that will affect the quality of the synchronization and its speed.

Why do I need a computer for my TV?

Before you tell how to connect your computer to the TV through the "tulip", answer this question. First, look at the normal screen of the monitor and take a look at the TV's display. The latter, as a rule, wins much more diagonal and is not somewhere in the corner on the desktop, but opposite a comfortable sofa or chair, where it can easily fit if not a big company, then a friend or girlfriend - for sure.

Viewing video, photos and game entertainment - all this on the TV screen looks much nicer than on a modest monitor: there is no need to look at the details, use the speakers, and even personal computers have not yet got their consoles.

The most common reason motivating the owner to connect the TV to a computer via an RCA cable ("tulips") is watching movies. But in fact on the LCD screen you can display the same picture as on the monitor. And it does not have to be a movie. So do not forget about photos, internet and games.

All sorts of auto- and flight simulators, arcades, shooters and even strategies feel great on the big screen, and playing pastime becomes really enjoyable. Also, no one forbids you to surf the Web without getting up from a comfortable sofa.

Synchronization

Before connecting the computer to the TV through the "tulip", look at the connectors that are in the video card and which ones are on the TV. A video accelerator responds to the video signal output from the PC, the connectors of which can easily be detected by connecting the cable from the monitor. Communication interfaces of the TV can be found from the back, from the side or even from the front of the device, but in any case it does not hurt to look at the instructions.

Views and varieties of interfaces along with connectors are not so many. Let's try to identify the main types that are most often used on video cards.

Video card connectors

D-Sub, or VGA-connector, which connects to a standard monitor. It is on almost all video cards (in particular from MSI), except for the latest generation models, where more modern switching outputs are used. The VGA interface is called an analog output in another way, from which the same signal is transmitted.

DVI-I , and in some cases with the D prefix is an advanced output that works with analog monitors as well as with digital monitors. In models of the past, this interface, as a rule, adjoins the analog VGA-output, and some manufacturers complete their video cards with a special adapter-adapter type DVI-D-Sub, if the line was not equipped with this connector.

S-Video - no less popular interface along with the previous connectors. It is widely used in many areas, which, by the way, are sometimes not connected with computer video equipment. Connecting a computer to the TV via RCA ("tulip") by means of such a connector allows you to get a sufficiently high-quality video signal.

Modern ports

HDMI is the newest interface that is used to transmit high-definition images, providing the highest quality video and audio signals. A really sharp and rich image can be obtained only by this output, in other cases, working with a large diagonal is saturated with visible pixels, which are not entirely pleasing to the eye.

Connectors TVs

RCA- interface, or composite connector type "tulip" - this is an outdated output, but due to its wide popularity it is very common in everyday life. Before connecting the TV to the computer (the best ways are D-Sub and S-Video), you need to find a special cable. The spread of the wiring is quite simple and differs in color: one for the image, and two others for the sound (left and right channel).

S-Video . If you use this interface when synchronizing with a similar output on the video card, then, of course, no adapters are needed, and the signal will go without interference and obstacles. In case of a mismatch of commutations, you can find a VGA-S-Video adapter.

SCART is a relatively old interface that can simultaneously transmit both audio and video signals. Its main purpose is to connect a video player or other similar player. To synchronize with a computer, you need a SCART-D-Sub or SCART-S-Video adapter.

Modern Interfaces

HDMI is, as mentioned above, the most high-quality version of the picture on the screen, and if your video card and TV are equipped with this connector, you can safely use the synchronization without any restrictions. For synergy is quite inexpensive adapter type HDMI-HDMI.

General recommendations

Before connecting the computer to the TV through the "tulip", make sure that you have the above mentioned connectors, otherwise get a special adapter, the benefit of which in the computer market of all kinds of adapters, including the most exotic, is enough. The only thing that is bad is the adapter, so it's because it can degrade the picture on the TV screen by changing the signature.

Switching cables can be bundled with both the video card and the TV itself, so carefully study the completeness of both devices before connecting the computer to the TV.

The review of cables and interfaces showed that the most suitable adapters and corresponding types of connections are as follows:

• D-Sub (VGA) - DVI-I.
• D-Sub (VGA) - SCART.
• S-Video - SCART.
• DVI-I - SCART.

In other variative cases, the signal is greatly distorted, the picture suffers, therefore experts do not recommend using other methods of commutation.

There is no need to save on connecting cables. Cheap material and an unknown manufacturer guarantee low noise immunity, which will reduce image quality several times.

If you have any doubts about the choice of this or that method of communication, then you can look through the official forums concerning your video card or TV model, there certainly will be questions / answers for technical support in synergy with popular device lines.

Audio signal

Most motherboards use standard connectors for audio output such as TRS 3.5 mm or, in other words, a mini jack. Before connecting the computer to the TV via RCA, make sure that the audio output on your devices is equipped with such interfaces, otherwise you will have to additionally purchase a special adapter.

The same goes for connecting through SCART and S-Video interfaces. In the event that your TV is equipped with a separate audio system, then problems with connections should not be at all. Such systems are always equipped with popular connectors that do not need an adapter or adapter.

And one more important advice: all operations on connecting / disconnecting any equipment to both the TV and the computer must be done with the power turned off completely. Only after all the wires and cables have found their place and sit tightly in the connectors, you can turn on the equipment and go to the program setup.