How do I change the fuel filter? Tips for Motorists

It is possible that a heavily clogged fuel filter can cause a major overhaul of the engine. Before this happens, the motor will be jumping for a long time in revolutions, and the dynamics of traffic will deteriorate noticeably. If you notice that your iron friend started to "jerk" when driving and not gain enough speed, then it's time to replace this part. So, let's talk about how to properly change the fuel filter, and also discuss how much it should be used.

Is there any risk with a manual replacement?

It is worth noting that this process is so primitive and simple that even a novice motorist can cope with it. For the whole work you need a minimal set of tools and only 10-15 minutes of free time. This is even less than a trip to a maintenance station.

How do I change the fuel filter? Step-by-step process

First we need to detach the terminals from the battery and unscrew the bolts that attach the filter cover. There are four of them in total. Next, in order not to damage the wires, disconnect the mass air flow sensor. After that, remove the body from the rubber support and loosen the clamp, which fixes the air branch with the cover of our filter. Then remove the lid, using a carabiner wrench on 17, carefully unscrew the union of the metal hose. First, we produce this process with one element, then with the other, located on the opposite side. If the hose is poorly removed, motorists recommend putting the key on the filter housing on the 19 and holding it until the desired result is achieved. Next, you should prepare a special container, where you can drain the gasoline. It will flow without fail, so if necessary, put on rubber gloves and plastic glasses, because because of high pressure, fuel can splash on your hands and face. Everything, at this stage, the dismantling of the spare parts can be considered to be suspended. But that's not all, so we go further into how to change the fuel filter. Now we need to insert a new part into the place of the old one. Before changing the fuel filter, it should be borne in mind that this part has only one direction of installation, which can not be confused. To do this, each manufacturer marks the spare parts on the body of the white arrow. It shows the location where the inlet and outlet hose should be installed. Otherwise, you have to reassemble everything and change it to a new one. Also prepare a piece of rag or cloth. It will be needed to wipe the traces of fuel that has fallen on the rubber gaskets. Next, the installation of a new part is performed using the same tools and with the same sequence. But before starting the engine, carefully check the tightness of all connections and turn on the gasoline pump so that the fuel is completely pumped into the filter.

How much does it cost to change the fuel filter?

If you decide to address this problem in the car service, the price of the filter itself will depend on the manufacturer and on the vehicle in which it is used. For work it is necessary to lay out from 700 rubles and above. The service life of this part in Russian conditions is the time for which the car will pass about 30 thousand kilometers. In Europe, where the quality of fuel is carefully monitored, the filters last longer, so the question of how to change the fuel filter is set 2 times less often.