Fret saw table electric on a tree: models, characteristics. Spare parts for jigsaw

For lovers of working with wood today has developed a huge variety of tools, but one of the indispensable is a jigsaw that can be table-top or hand-held. The jig saw is an electric tool used for longitudinal, transverse and figured cutting of wood. The main advantages of this equipment are:

• The ability to perform any curly cutting;
• Indispensability when working with wood;
• Universality.

Before choosing such a unit, you need to think about what kind of load will be on it. If you want to solve problems in everyday conditions, then you should prefer a tool that will be able to process wood no more than 70 mm thick. In this case, the device will have a small set of functions, and its power will not exceed 350 watts. The total time of work with such a tool will be 20 hours per month.

Professional jig saws will have more impressive characteristics, among them the thickness of wood up to 135 mm, as well as a set of additional functions and unlimited time of continuous work. In this case, the power can reach 750 watts, and the dimensions and weight will be larger than those of the above-mentioned class.

However, when choosing, it is necessary to pay attention to the manufacturer, which should have a good reputation in the market. Before buying, you should familiarize yourself with the characteristics of some models, as well as find out what the cost of spare parts for them.

The most popular models of electric table-top jigsaws: Dremel Moto Saw

If you need a jig saw, you can pay attention to the stationary model mentioned above. It will cost you 7500 rubles. This equipment is intended for processing parts not only of wood, but also of plastic. With its help, you can cut an 18 mm sheet.

The device can work in stationary and manual mode. The surface of the support sole has a graduated scale, which ensures maximum accuracy of operations. The device is easy to transport, as well as light weight.

Dremel Moto Saw specifications

The above-described jigsaw table top is powered by a 220V power line. The power of the equipment is 70W, while the idle speed is 2250 per minute. Weigh the equipment is quite small, the mass is 1.1 kg. The length of the file is 100 mm.

The operator will be able to quickly change the nozzles using a special lever. In operation the equipment is quite simple, the device has a handle, which makes the operation quite convenient. The vibration is 9.3 m / s². The equipment provides the possibility of a figured cut and is ready to last long enough if you use it according to the instructions. The sound pressure is 77.5 dB.

Cost of spare parts

The above-described jigsaw table saw in the process of work may require the purchase of consumables, among them wood and metal files. For example, a 100 mm saw blade for 7 teeth for a stationary jigsaw will cost 470 rubles. The same price is for a 10-tooth saw blade for metal, its length is 100 mm.

Characteristics of electric jigsaw "ZUBR ZSL-250"

This jigsaw table machine will cost 15900 rubles. It is used for sawing wood and plastic and allows you to perform the functions of polishing, grinding and drilling. To do this, the kit includes a flexible shaft with an additional work table and cartridge.

The manufacturer has provided a cooling system, which eliminates overheating of the instrument. In order to cut at an angle, the work table can be tilted. Such stationary desktop jig saws have good power, which is 250 watts.

As for the width of the workpiece, it is 406 mm. The idling speed is 1600 per minute. The thickness of the file is 0.3 mm, and the angle of the table can vary from 0 to 45 ° C. Weigh this equipment 21.5 kg, so it will require a special table. The maximum thickness of the workpiece can be 50 mm. The length of the file is 133 mm, while its width is equivalent to 2.6 mm.

Specifications of Jigsaw Brush Bosch PST 900 PEL

The above jigsaw "Bosch" costs only 5600 rubles. And is a household electrical equipment. Its power is 620 watts. Use this device for longitudinal cuts and cuts in:

• Metal;
• Wood;
• Plastic;
• Rubber;
• Ceramic tiles.

In order to ensure a neat cut, the device is equipped with a cutting line control system. The operator will therefore be able to guide the tool quite accurately along the marked line. The instrument has a backlight, but there is no slope adjustment. This applies to the cast sole, as well as the presence of a smooth start. However, to simplify the transportation, the manufacturer added a case to the equipment.

This jigsaw "Bosch" weighs only 2.1 kg, if necessary, it can be connected to a vacuum cleaner, and when using a protective screen. As an additional advantage is the ability to quickly replace the saw blade and adjust the speed. This mini electric jigsaw electric table provides high accuracy of cut, which is guaranteed by the rotation of the adjusting wheel.

The tool is durable enough, because the sole is made of high-quality steel. Replace the files can be quite quickly and independently, without resorting to the help of an additional tool.

Cost of consumables

Spare parts for jigsaw need you in the process of using the tool. Consumables are sawdust, their average cost is 400 rubles. This price will have to pay for the files T101AO in the amount of 5 pieces. Their length is 56 mm.

If this parameter is increased to 74 mm, then for 5 T101B saw blades it is necessary to pay 385 rubles. Spare parts for electric jigsaws are presented today in a wide range. For example, the saw holder can be purchased for 300 rubles, while the stock frame - for 250 rubles. Guide fret saw, which is also called a roller, will cost the consumer 200 rubles. If you need fixing a saw blade on a desktop jigsaw, then you should remember that it is fixed in addition with two M3 screws on the rod and a single M4 screw.

Features of work with a jig saw

Sawing with a desktop jigsaw is more comfortable than using a hand-held analog. You can make such a tool even yourself using a sewing machine. The cutting line will be more rough than that of the hand-held analog, however, in terms of cutting speed this tool has no equal.

It is worth remembering one drawback of such equipment, which is expressed in the maximum depth of the cut, which in some versions is 40 mm. Therefore, when choosing a desktop device, you should pay attention to the presence of a speed regulator of the saw. If you learn, then it will be difficult to cut out with frequent movement.

Methods of work

Before using the jig saw on the plywood, it is necessary to apply a pattern, and after sanding the surface to a smooth base. After the completion of this mechanical work, you can start creativity. If the drawing assumes the presence of elements with straight faces, then you can save energy by placing the workpieces back to back, in which case you will only need to perform one instead of two cuts.

Once the pattern has been applied, it is necessary to make holes in which the saw blade is placed. Holes can be made by hand turning or electric drill. You need to do them by placing them in the middle of the fragment that you plan to saw out.

Recommendations of a specialist

The prepared disc must be laid on the jig saw stand, passing the saw into one of the pre-made holes. If you need a straight piece, then you need to start work from the edge of the workpiece. The speed of work will depend on how thin the lace should be.

If the work is quite complicated, even a seasoned master can take several weeks to get it. Once all the details have been cut out, you can start processing them, for this, the surface should be sanded with sandpaper, achieving absolute smoothness.

Conclusion

Before choosing a specific model of electric desktop jigsaw, you must pay special attention to the number of strokes per minute. From this parameter will depend not only the speed of work, but also its quality. Usually, this indicator varies from 500 to 3100, but on the market you can find models with a stroke rate of up to 3,500 units per minute.

Additional useful functionality is double electrical insulation, which is indispensable for working in damp areas. In order to provide the jig saw the possibility of working with different sizes of saws, it is necessary to select a tool with a universal fastening. It is important to pay attention to the presence of a support roller, which must have an impressive diameter.