Finishing the facades of houses. We try various materials

The house is built, interior decoration of premises is made. It's time to beautify the face of the building. Now the facades of houses are decorated in various ways, the choice is great. If the building is faced with clinker bricks, the issue has already been resolved. This material with perfect edges, seams under the screed, and even blackened soot look great without additional ornaments. If the walls are made of parts that are not finishing, you should not be upset. The material for finishing the facade of the house is easy to find.

Classics of the genre

You can apply the traditional method - plastering walls with special solutions with subsequent painting. To the surfaces is glued a mineral wool board fixed with facade dowels. It is applied to the base layer of plaster. Then the glass mesh is applied. The final decorative layer of plaster is applied over. The disadvantage of this type of work is the need to periodically refresh faded paint.

Modern tendencies

Above we considered finishing the facades of houses, not providing for ventilation. Facing with ceramic granite refers to ventilated methods. The perfect solution. The building looks presentable and bright, but this method is more suitable for office buildings.

The first layer is a heater, fixed with a special glue and facade dowels. Then the profile system is installed, which is the base to which the plates are attached. The gap between the ceramic granite and the heater, formed by the profile, provides ventilation of the walls.

Durability

If the natural stone is combined with the architecture of the building, finishing the facade of the house with a stone is an excellent option. A shale slab or other material available in the region that has a laminated structure is used. The process of facing is laborious, but it is a durable and beautiful coating. The weight of the structure of stone should not rest on the blind area of the building. Otherwise, if the concrete slumps when the soil settles, the granite layer will lose its support. To prevent this from happening, a corner with a shelf width of 50 mm is horizontally fixed at the bottom of the facade. It is targeted by a mounting gun or fixed by anchors. To the weight of the facade is distributed evenly, it is recommended to shoot the corner in 1-1.5 m of the wall. At the end of the work, the stone and seams are washed and varnished.

Cute synthetic material

1. It is possible to finish the facades of houses with artificial panels, imitating natural stone. It looks like a natural material, but it costs much less. Panels are produced with imitation of wild stone, clinker brick, antique masonry and other popular coatings. In addition to saving, this option has the following advantages:

• The facade is ventilated;
• The material is light (the weight load on the walls is minimal);
• Does not require additional painting, it is sufficient to rinse with dust.

2. Now the decoration of the facades of houses with vinyl siding is popular. Ventilated durable way: inexpensive for the price, simply mounted, does not burn out in the sun, easily washed.

3. The finishing of the building with sandwich panels is also a good solution. At the same time, the walls have thermal insulation, ventilation and attractive appearance. From the title it follows that the panels are multi-layered:

• Inner facial layer;
• Mineral wool board;
• Outer facial layer.

In general, there would be a facade, than to decorate and protect, there will be.