Covering nails with gel without build-up: step by step instruction

The variety of types of manicure in recent times is amazing. In the salon of the master do incredible things with the fingers of their customers. Now you can not only different ways to treat the cuticle and the skin of the hands, but also to change the shape of the nail plate. In most cases, special forms, tips and gels are used for this. This article will describe the covering of nails with gel without build-up. You can learn about the features of this procedure. Also find out what you need to cover your nails with gel.

Required materials and tools

If you decide to cover the nails with gel without building up, you will have to arm yourself with some materials and devices. The most important in the work is the presence of a viscous substance, which will subsequently be laid out on the plate. The gel can have several types. It is preferable to choose the known three-phase system for all. This includes the base, the base and the finish coat. Also recently, biogels have become very popular. However, such materials are not kept on the nails for more than two months. They have to be completely removed during the correction and reinstalled. Also there are three system gels in one. This coating will replace the base, the base and the finishing layer. What to choose is a personal matter for every person.

In addition to the material, you will need tools. This includes abrasive files, bafics and napkins. Do not forget about the primer, which will seal the nail cover with gel, and degreaser. You can not do without an ultraviolet lamp. How is the coating of nails gel without build-up? A step-by-step instruction will be presented to your attention below.

The first step: preparation of natural nails

Before you start coating the nails with gel without building up, you need to properly process the plate. This will require a file of medium hardness. First, determine the length of the nail and podpilite edges, making the same shape. Then grind the top of the plate. You need to do this very carefully, do not overdo it. You do not need to fully drain the nail, but only to remove the thin upper layer.

When the work is done over all the fingers, you can proceed to cover the plate with a primer. This tool will improve the adhesion of materials and help avoid loosening in the future. Remember that after this coating, you should not touch the top of your nails to other objects. Otherwise, the thinnest layer will be broken.

The second step: the base coat

When the primer dries (usually within one minute), you can apply the base. You need to do this in a very thin layer. The gel should not just be laid out on the surface of the plate, but as if rubbed into it.

The base coat should be dried in a lamp for two minutes. Remember that you can not touch marigolds to foreign objects. This can lead to damage to the gel layer or the adherence of foreign particles to it.

The third step: the second layer

Covering nails with gel without build-up necessarily involves applying a modeling layer. If you were to increase the length of the plate, you would do it with this particular material. Take the brush and apply a thin modeling layer. If desired, this tool can fix the shape of the nail.

Dry the lined modeling gel in the lamp. Depending on the power of the tool, the holding time should be between three and seven minutes. Alternately, perform an impact on the fingers and move on to the next point.

Fourth step: shaping

Further coating of the nails with a gel (instruction) provides for the sawing of the laid out layer. Armed with an abrasive tool and give the gel the desired shape. If you are completely satisfied with the size and width of your nails, then simply align the modeling layer with a saw or a hard file. Remember that during the laying out of the gel you can not wash and wet your hands. Purify the marigold from dust will help the napkin, impregnated with degreaser.

The fifth step: the finishing layer

The step-by-step coating of the nail gel in the next paragraph assumes the application of the finishing layer. It can have two types: a sticky and non-sticky base. In the first case, you will need to use the degreaser and grinding surface in the future. If the coating is non-sticky, then it will be enough just to dry it in the lamp.

Spread the finishing layer you need very thin. After that, the nail is not cut and not modeled. When the layer is dried, you can safely wash your hands and start applying the design.

How to adjust the natural nails covered with gel?

Like the padded coating, your own nails under the gel layer require periodic correction. You need to conduct it as follows.

1. Peel the top (finishing) layer with the abrasive tool.
2. Give the nail the right shape.
3. Apply the primer and allow it to dry. Pay special attention to the processing of the free edge of the plate.
4. Put on a natural nail base and dry it in a lamp.
5. Cover the nails with a modeling layer and work it in an ultraviolet device.
6. Apply the finish coat and dry.
7. Wipe the marigolds with degreasing compound.

Use of biogel

Increasingly, natural compounds are used in order to coat the nails with gel without building up. Reviews about such tools are quite controversial. Some women are satisfied and confident that the gel is completely harmless. Other ladies do not recognize such material and prefer to use classical methods.

The biogel is applied in the same way as the standard coating. However, in this case the layer will be only one. Some materials do not require the use of primers or other fastening compounds. The biogel is dried in the usual manner in a lamp. The life of this coating is approximately one month. After that, the layer is removed and a new composition is applied.

Application of the system three in one

This type of gel nail coating without build-up is the simplest and easiest of all presented. For work, you need to proceed according to the following instructions.

1. Spit the top cover of the natural plate. Do not overdo it.
2. Wipe the marigolds with a degreasing compound and remove any dust from them.
3. Cover the fingers with primer and let it dry.
4. With the help of a brush put the finest layer of gel on the nail.
5. Place your fingers in the lamp and hold for 2 minutes.
6. The next layer should be somewhat thicker. It must also be treated with ultraviolet light. However, it is necessary to hold the handles in the lamp for up to five minutes.
7. Wipe the cover with degreasing solution.
8. Buff on the top coat. After this, you can start applying the design or coating with a conventional varnish.

Nail coating with gel without increasing the length

What are the advantages and the meaning of creating such a coating? Legs of the fairer remain in the natural form. They do not get longer. After all, many women consider this method vulgar.

The undoubted advantage of this treatment is that the plate becomes much stronger. You can do all the usual work around the house and do not worry about that the nail will break or begin to break up. Also the design on such nails lasts a little longer than on natural ones.

Summing up the article

You now know how to cover the nails with gel without building up. Photos of the final work are presented to your attention in the article. If you are not confident in your abilities or there are no necessary materials for work, then contact the manicure salons. Experts and experts in their field will quickly prepare your marigolds and do what you want. Look after your pens and be beautiful!