Ceiling tiles from expanded polystyrene in the interior

Ceiling tiles made of expanded polystyrene are by far the most affordable and economical way of decorating the ceiling. In addition, this material is aesthetically attractive enough, so it can decorate any room.

Ceiling tile in polystyrene is divided into three types according to the mode of production . Injection is produced by the method of sintering expanded polystyrene raw materials in special forms under the influence of steam. Extruded polystyrene is produced by the method of vacuum forming and extrusion of expanded polystyrene raw materials. Stamped tiles are made of expanded polystyrene by thermo-stamping, resulting in sheets with a thickness of about five millimeters.

Ceiling tiles made of expanded polystyrene differ not only in their production method, but also in their technical characteristics and in price. The most accessible are the pressed plates - they can be painted with acrylic or water-based paints, but they are undesirable to use in premises with high humidity.

Injection ceiling slabs allow to obtain a seamless ceiling on which the connections between the slabs are practically not visible. These are the most expensive slabs of expanded polystyrene. Their price is higher than those stamped about three times.

Extruded Expanded polystyrene. The characteristics of this material allow the use of ceiling slabs from it in almost all rooms of the apartment. It is water resistant, so if negligent neighbors from above flood your apartment, you may not worry about the ceiling. This tile is laminated and can be either completely white or painted in different colors. It is perfectly cleaned with soap, sponge and warm water. The cost of it is more than two times stamped.

One of the main advantages of this material is its low cost with a high level of quality. It is available to buyers even with very modest incomes.

Ceiling tiles from expanded polystyrene have several significant advantages over other materials used for finishing ceilings. It perfectly hides the various irregularities of the ceiling. This effect is achieved due to the bulk of the plates and the variety of colors offered. The tile is easily and simply mounted with a special quick-drying glue. Such a job can be performed by any person, even without professional skills.

Expanded polystyrene tiles can create a suture and seamless design. If you want to make a seamless ceiling in your room, then you should know that there are figured protrusions and hollows on the side faces of the tile. Correctly observing the order of packing, which is indicated on the package, you will get a perfectly smooth seamless ceiling.

Ceiling tiles made of expanded polystyrene are successfully used for the installation of suspended ceilings. This system is easily and quickly installed due to the minimum weight of the plates. It must be said that the plates made of expanded polystyrene do not burn out completely under the influence of the temperature of the luminaires, which are usually mounted in a similar construction.

Today, ceiling tiles made of expanded polystyrene are one of the most sought-after finishing materials due to a successful combination of price and quality.