Car alarm "Starline A91": user manual. "Starline A91": connection diagram

The "Starline A91" alarm system, introduced in the market of automobile equipment , has been an unchallenged leader for more than a year. Those who decided to join the number of users of this system, at the initial stage will be useful instruction manual "Starline A91." Having become acquainted with the rules of installation and application of signaling for a car, one can not doubt the efficiency and comfort of the equipment presented.

General information

By purchasing a car alarm system and starting to study its instruction manual, you can notice the obvious advantages of "Starline 91" in front of other similar equipment.

The equipment commands are managed using a keyfob with a clear interface. It is characterized by the simplicity of control. So, the range of the presented system, according to the manufacturer's documentation, reaches 2000 m.

The alarm system is quite versatile and suitable for installation on almost any car. It can be a car with a diesel, gasoline engine, as well as turbine versions of them. The transmission can be automatic, mechanical or robotic.

Properties of the system

There is a certain structure of security features provided in the car alarm "Starline A91". The installation instruction speaks of such properties as:

• Connection of the StarLine DRR wireless relay;
• The end pieces of the car's design elements (bonnet, doors, trunk, parking brake);
• The ignition is from on;
• Two-zone shock sensor;
• It is possible to connect an additional sensor.

Protection of car alarm system "Starline A91", according to the installation instructions, is achieved using certain functions.

One of them is the use of a dialogue control code, which excludes the possibility of electronic hacking of the system.

The device remembers the settings when the battery is disconnected, which also adds reliability to the "Starline A91". Installation instructions provide for limiting alarm cycles from sensors.

The undoubted advantage of the system is also the disabling of the alarm signal without the cancellation of the security activity.

Trinket

Studying the principle of operation of the "Starline A91" system, it is necessary to familiarize yourself with the management conditions of the key fobs that are included in the delivery package.

The package includes two devices. The main one is a liquid crystal display and 3 feedback control buttons. The second keychain is not equipped with a display and has 2 buttons.

Changing the system parameters and controlling the operation of the equipment is displayed on the display of the first keyfob.

Due to this operation "Starline A91" is much simplified. Provides for highlighting the key fob, as well as their sound and vibration signals.

Cursor way to select icons, as well as the interface in Russian will be understandable to any user.

Having installed the "Starline A91" on the car, you can get information on the temperature of the engine and the interior, as well as use functions such as an alarm clock, a clock and much more.

Installing the system

Installation "Starlight A91" takes about 5 hours. When performing the installation properly, the system operation warranty is 5 years.

By installing the "Starlight A91" in accordance with the manufacturer's scheme, you can get a high-quality car alarm with a remote engine start.

Depending on the type of vehicle, you can use additional modules during installation. They, for example, help to bypass the regular immobilizer or simplify the installation, minimize interference in the wiring of the car.

Equipment

Connection scheme "Starline A91" implies the use of the complete system. It includes components such as 2 key fobs (with and without LCD display), a central processor, a signal receiving and transmitting module with an antenna, a shock sensor, a temperature sensor, a siren and an LED indicator.

Also included in the delivery are a button for the hood and a service button.

To connect the system elements, there is a two-sided scotch for fixing the sensor of reception and transmission of the signal, as well as its cable, connection for the shock sensor, the main cable with a connector for 18 channels, a power cable for starting and powering the system, a cable for the central lock with 6 connectors.

In addition, the installation and operation manual "Starline A91" is attached, the connection diagram in which is set out in Russian. Also you can find in the kit a battery and a cover for a key fob with a display.

Mounting Tools

When working with the "Starline A91" connection diagram, it is necessary to prepare the necessary equipment for mounting.

To carry out the work, you will need tools such as cross and slotted screwdrivers, a 10 mm end key , a side cutter, an insulating tape, 3 10-15 mm screws, and plastic clamps of 200 mm in number of 15 pieces.

It is also necessary to prepare a conductor for pulling wires and a corrugated tube with a diameter of 10 mm and a length of 3 m.

A soldering iron and solder POC-60, M6 bolt, 0.125 W resistors and such types as 3.8 kΩ, 1.3 kΩ, 2.2 kOhm will be required. And also prepare a 1000 uF * 25V capacitor.

An important element is a car five-pin relay and pads with a diode in the amount of 4 pcs.

Preparation before installation of the system

The instruction manual "Starline A91" provides installation of the system in several stages. At the initial level, the corresponding structures of the car are dismantled.

First, 3 self-tapping screws of the sub-pile-driver are unwound, and this part is removed. Next, the steering wheel cover is removed, for which the fixing screw and 2 screws on each side are unscrewed.

The instrument panel is removed. The left air duct is pulled out on the torpedo and the dashboard lining is dismantled. The left threshold is removed.

The transmission liner is removed. At this point, the dismantling process is completed.

Equipment installation

When installing the "Starline A91" signal, the actions are carried out sequentially, in accordance with the manufacturer's recommendations.

• I - a dial tone.
• II - switch sensor.

First, a siren is installed under the hood. There are also temperature sensors attached. The signaling circuit "Starline A91" involves laying the wire through the seal on the driver's side.

Next, the antenna is installed. It can be attached either to the upper left corner of the windshield or to the dashboard. The impact sensor should be attached to the steering shaft with a plastic clip, and the LED on the windshield pillar on the left side.

Then connect the wire monitoring trunk and engine operation. According to the "Starline A91" signaling scheme, the system unit is fixed to the left behind the instrument panel. The appropriate cables are connected to it.

The CAN-bus wire is connected to the diagnostic socket or to the connector on the top left of the steering column.

The main connections are made behind the decorative lining of the gear lever according to the factory numbering.

Next, turn signals and control the central lock. After that, the ignition wires and accessories are connected.

According to the appropriate scheme, the starter start circuit is connected. The frame of the immobilizer bypass module is put on the ignition lock.

Installation Complete

At the final stage of installation, the alarm power is connected. The necessary settings are made.

The "Starline A91" signal will require the adjustment of the shock sensor and start-up programming .

Assemblage of details of interior is made in return sequence to dismantle.

The entire system is tested. You can make an additional lock in the left threshold.

Having carried out all the above manipulations in the correct sequence, you can not doubt the effective, reliable operation of the entire system. Having studied all the functions provided in the car alarm, it is necessary to choose the most useful ones and learn how to set them using the key fob.

Customer feedback on system management

Studying the instruction of the user of the system, each consumer marks a huge number of the incorporated functions in "Starlight A91". Comments on the selection of the most frequently used functions are highlighted by several of the most popular ones.

To them, first of all, it is possible to carry a request for temperature in the cabin, for which it is necessary to clamp the button of the status of this indicator.

According to reviews of motorists, the very demanded function of "Starline A91" is the request for engine temperature. Information about this parameter can be obtained by double-clamping the status button.

Many users use the keyfob to open the trunk, clamping the buttons for requesting status and arming.

According to reviews, many car owners choose to start by temperature, by timer or by alarm clock.

Each driver will have a list of the most useful features that provide comfortable control of the alarm system for cars.

The arsenal of commands laid in the "Starline A91" system will bring comfort to the operation of the car of any user of this system. Maybe it will take some time to study all the envisaged programs, but having mastered the most interesting ones, applying them in everyday alarm management will not be very difficult.

Negative system feedback

Among the responses of motorists left in the most diverse sources about the presented product, there are many positive comments.

However, there are also negative statements regarding the work of "Starline A91". Critics' comments allow us to conclude that the radius of the wave signal stated in the instruction does not correspond to the realities of the urban landscape. The presence of interference in the form of extraneous signals and concrete walls significantly reduce the range of sending commands. In some cases, it does not exceed 300 m.

However, this is enough to operate the system from a high-rise apartment if the vehicle is in a courtyard or a garage near the house. The specified signal sending radius corresponds to the claimed manufacturer only under pure field conditions.

Another unpleasant moment, according to the feedback of users of the car alarm "Starline A91", is a large energy consumption of equipment in the winter. So, the energy consumption stated in the documentation in 15 mA really at minus temperature will be about 60 mA. This discharges the car battery in a very short time.

Positive feedback

Despite the presence of negative feedback, in general, the car alarm system is characterized quite positively.

Very many users note as a comfort factor the possibility to warm up the car in the winter without leaving home. The driver drinks a cup of morning coffee in his apartment, and his car heats up within 10 minutes under the control of such a system as the "Starline A91" car alarm. Reviews of motorists also say that it is allowed to extend the warm-up time for another 5 minutes, if for some reason they had to stay at home.

Of the positive feedback from users is also worth noting a large number of useful features provided by the manufacturer. Having studied the recommendations, which contains the instruction manual "Starline A91", each driver can choose for himself the most useful commands used for the system.

Against the background of rather moderate cost of the presented equipment, its operation, as well as the quality of its operation, make Starline A91 an advantageous option among analog systems.

Having become acquainted with the main characteristics, recommendations for installation, as well as user feedback on the presented product, there is no doubt that this equipment will be sufficiently functional in operation and durable in life. The instruction manual "Starline A91", studied properly, will help to correctly mount the car alarm system, as well as correctly apply all its functions in everyday life. This is a worthy and reliable equipment, presented in the market of car goods.