Bulgaria is ... How to choose a Bulgarian? Why do we need a Bulgarian?

The bulgarian is an angle grinder, which is a universal tool. It will not be superfluous in any economy, after all, when carrying out repair and construction work, we constantly have to grind, peel or cut something. Therefore, to buy this tool is for every owner, but before that it is important to determine what characteristics the equipment should possess. Decide for yourself what list of operations you have to perform, do not buy a tool that performs much more manipulation than it is required for you, because in this case you will overpay. Bulgarian - this is the tool with which you can cut slate, metal corner and stone. With its help, you can grind the weld seam or get rid of rust from the surface. Using this tool, the master can cut ceramic products or clean the wooden surfaces. For this it will only be necessary to change the nozzles.

General information

Before you purchase the above-described tool, you need to decide what materials you will most often use, what depth of cut should be provided during the work, whether you want to repair the Bulgarians during operation. Before buying, you need to pay attention to the weight of the tool, since professional equipment, as a rule, has a significant mass and is unlikely to be convenient for household use. After analyzing all the functions of the tool, you will be able to find an adequate model for yourself.

Economical tool

If you need a Bulgarian on wood, then you can choose the equipment of economy class. Cost it will be within 1400 rubles, but for this price you will become the owner of the tool, which does not have many important parts and adaptations. Some models of this class do not provide proper reliability and safety. If you use the tool fairly rarely, as well as a short time, then this model is suitable for you. Its body is made of thin steel, but it will be able to undergo minor loads. Fastening at such tool is carried out by means of a collar with a nut and a tight screw. It is strong enough, but it does not always guarantee usability, as it will be necessary to use a screwdriver and a suitable wrench. For household use, the tool is suitable, but the engine does not have dust protection, as a result of which the fine particles of the elements to be worked will contribute to the abrasive wear of moving surfaces, and repairs of Bulgarians may be required. Metal dust can cause a short circuit.

If you are building and repairing on a commercial basis, it is recommended that you purchase a more expensive and reliable model that will have the best quality.

Middle class tool

The Bulgarian, whose price is equal to 3500 rubles, refers to middle class tools. Such equipment is considered convenient and safe. It has sealing inserts and lacquer coating of the rotor, which prevents the penetration of contaminants. Such machines are intended for use in domestic conditions, they are equipped with a clamping mechanism, which allows for quick adjustment of the position of the protective casing. Such tools have convenient start buttons and react to pressing the finger of a brush in a rubber glove. Such a Bulgarian, whose reviews are often quite positive, has a more impressive set of functions. It can be used by the left-handed owner or right-hander, since the handle can be screwed on either side. For convenience, some models of this class allow you to install the handle from the top.

Professional Equipment

Repairing the Bulgarian is most likely not useful if you acquire a professional tool. The mechanism of such equipment is protected from dust, and has a soft start function. This ensures a gradual increase in the speed of the disk. That is why such a tool can be connected even to a weak electrical network. Instruments of this class are protected against vibration, manufacturers install on them an automatic balancing system of the working disk. The cost of such equipment can start from 4000 rubles, and the final threshold is very impressive.

Criterias of choice

Bulgaria is a tool that should be selected according to several criteria. The first of these is the scope of use. The second thing you should pay attention to is the number of pens. For use in domestic conditions, their number can be limited to one unit. However, if you choose professional equipment, then the pens should be two. Among other things, these components of the equipment must be rubberized.

Disk size and power of equipment

Circles for Bulgarians can have different diameters. The minimum size is 115 millimeters. It can be used for the most simple work. The largest size of the disk is 230 millimeters. With it you can cut brick, pipes, plates, as well as all that is necessary. If you choose circles for the Bulgarian, which will be used at home, then in the role of the optimal diameter should prefer 125 millimeters. If you are repairing an apartment or house, then you should choose a disc of 180 millimeters. The equipment capacity can vary from 0.5 to 2.5 kW. The choice of this parameter depends on the duration of the motor - the engine power should be enough to spin the drive.

Additional functions

Bulgarian - this is the tool to use which sometimes happens for a long time. That's why it is important to take into account the availability of additional functions, among them you can select the option of smooth start. Such a system will allow the equipment to run without jerks, this will smooth out the voltage surges that arise in the network. You can pay attention to the presence of automatic disk balancing. This function will be useful for uneven wear. The system smooths out unevenness and reduces vibration. If you buy a bulgruk of high enough power, then it must be a function of protection from jamming. This option will prevent negative consequences when the engine can be shut off automatically. It is important that the use of such a tool is safe. For this, the equipment is protected against restarting. If the power supply has been discontinued and then resumed, the Bulgarian should not start working independently. Pay attention to the fact that the Bulgarian has the protection of the motor from the penetration of all kinds of particles and dust.

Conclusion

When working with this electric tool, one should not forget that long-term and frequent overloads can cause the machine to fail. Therefore, when carrying out the work, it is necessary to make periodic stops of the equipment motor, which not only prevents possible overheating, but also eliminates the need for repair. By the way, it can be very expensive. If you want to become a holder of quality equipment, no matter what class it belongs to, it is important to ask the seller if the tool has a quality certificate. In addition, it is necessary to take care of both the warranty and maintenance throughout the life of the product. Those manufacturers who are worried about their reputation give their products a fairly long warranty, which protects the buyer from the purchase of poor-quality equipment.