Booth for the German Shepherd: dimensions, scheme, construction instruction

For the service breeds of dogs or hunting, the hardening of the organism is very important, therefore it is extremely necessary for an animal to stay on the street. A good owner is obliged to provide his pet with a normal life, so it is necessary to understand what should be a booth for a German shepherd, which will meet all the requirements of the pet and bring only pleasure to the tenant.

Determine the place of construction

The place of the dog enclosure should be well removed from your house or other structures: a drain hole, a road and a toilet. Perfectly suitable light hill, covered with trees or bushes from wind and hot sunlight. It is extremely unfavorable if the box for the German Shepherd is next to other domestic pets, whether chickens, horses or pigs, since the products of their vital activity will bother the pet.

Classify two types of such buildings: the classical model and the improved one. The most ordinary and generally recognized type is a one-room premise. The second type is complemented by a tambour. A dog house for a German shepherd is usually built using the advanced modification method.

Materials for manufacturing

The most priority material for building a den is wood, usually pine. Edged board will be an ideal option. Pressed particle board is not recommended because of its rapid destruction under the influence of moisture and the presence of harmful chemicals in the composition. House boards need to be painted to protect them from moisture.

For conditions with a low temperature climate, the construction must be made with double walls, sandwiching the insulation. It is better to choose natural: sawdust, cotton wool, felt or fabric. Cover the roof can be roofing felt, slate, roofing iron.

Perhaps an alternative option would be if the German shepherd booth is made of cement-particle board. The DSP is harmless and easy to use.

Booth for the German Shepherd: size, scheme

To your pet was comfortable and cozy in his home, you need to build a kennel, given some of the factors that are presented below.

Before you start the construction work, you need to take measurements from the animal:

• Measure the area occupied by the dog during sleep, when it lies on its side, spreading its paws, in other words, occupying the largest space, and calculate the minimum size of the room.
• Measuring growth at the withers, we get the desired height of the structure.

Experienced breeders are advised in the construction of the rest area and the frame itself to take the set parameters (described below).

The booth for German Shepherd sizes has the following:

• Width - 1,35 m;
• Depth - 1 m;
• Height - 0,95 m.

Also there are certain parameters of the entrance to the kennel, convenient for the dog.

A booth for a German shepherd has the following dimensions:

• Width - 0,4 m;
• Height - 0,6 m.

In any case, if you are not able to determine the necessary parameters to the end, it is better to exaggerate them than the construction will be small for the pet, otherwise there will be discomfort.

Booth for the German Shepherd: a step-by-step scheme

1. We prepare the material for construction, as described above.
2. The floor of the base can be made of bricks or make a screed, which will be priority (warmer). Also for the flooring will require two layers of boards and a heater between them. It is important to soak the wood with antibacterial agents.
3. We collect the frame of the walls. First of all, large bars are assembled to make the floor according to the planned size in the form of a rectangle. Then, the same size of the beam is fixed in height and, if necessary, small additionally, if the construction is long. Fasten more metal corners. Next, the roof is covered, in addition to the frame, if desired, we supply it with a sheet of plywood.
4. Sheathing and insulation of the house. From the prepared boards we sew a skeleton from two parties, not forgetting about a heater. We make isolation with the selected material, whether it is sawdust, cotton wool or something else. For a roof and a floor the scheme of warming is identical.
5. Finishing and accessories. Laz in the room can be built in such a way that it will be slightly above the ground, so that dust does not fly with sand, then the dog will easily cross the barrier. Also make it possible to attach the curtains by the type of the door. Outside we cover with varnish or something else, the main thing - inside leave everything natural, so that the animal does not get poisoned.

Practical tips for making a roof

Mainly it is necessary to make the roof so that it is possible to remove it or throw it away for cleaning in a booth or for carrying out emergency veterinary care to a pet. Two types of roofs are defined:

• Attic;
• Ceiling.

When making a kennel under a canopy, a roofing option is acceptable without an attic. If the booth for the German Shepherd is separate, it is better to choose another way of construction or make the roof sloped so that moisture or snow does not accumulate.

For insulation, you can choose the same materials as for walls. The ideal option is sawdust or foam. For more convenient removal of the roof, you can attach a handle. And that during the rain there was less noise inside, choose slate or soft shingles.

The main points of warming

To further insulate the kennel in the winter season, it is necessary to attach a canvas curtain at the entrance and hang the cargo to it. As a weighting agent, sand can also be used in polyethylene bags. Variants of retention of curtains from a strong frosty wind can be found many.