Beretta boiler: types, characteristics, installation

If you are the owner of a house that is not connected to the central system, you probably already managed to face the problem of independent individual heating. With the described task, a special boiler perfectly manages. The main thing is to choose the right equipment, so that the family nest is cozy and warm.

Types of boilers and their characteristics

If you are interested in the Beretta boiler, then you should be aware that such devices are on sale in several varieties. They can be distinguished from each other by the source of energy and the method of installation. Among other things, it is necessary to highlight gas boilers, which are the most common. They are used in the amount of 70% of the total number of boilers. This is due to the low cost of gas and the prevalence of gas mains. Such boilers can be divided into floor and wall. The last version has a circulation pump and expansion tank, which saves space in the room.

Wall boilers are double-circuit and single-circuit. If you decide to choose a double-circuit boiler "Beretta", you can provide heating for the house and use the possibility of heating the water. This equipment is small in size and excellently suited for private houses, which is due to ease of installation, operation and maintenance. If it is necessary to heat the heating medium without using a heating system, consumers choose single-circuit boilers.

Characteristics of floor boilers

The Beret floor boiler presupposes compliance with the norms and requirements of the gas service. It operates on the basis of a cast iron and steel heat exchanger. Such equipment is a floor boilers that have inflatable and atmospheric burners. The first option is characterized by ease of use, it is cheaper, and at work does not cause strong noises. Atmospheric burners have a high coefficient of efficiency, but are more expensive.

Buying the boiler Beretta, which is equipped with an inflatable burner, you buy equipment that has many advantages. Among them, we can distinguish the option of installing burners, which can work both on diesel fuel and on gas.

Characteristics of diesel and solid fuel boilers

The first type of equipment has the main feature, which is expressed in a replaceable burner. If you replace this element, you can use a different type of fuel. Such installations are equipped with an open combustion chamber, operate on the same heating circuit, and they can be purchased exclusively in the floor version.

Beretta boiler, the installation instructions of which will be presented below, can be solid fuel. These devices are the most common and older among other types of equipment. Such units are installed to maintain a warm climate and warm water in country houses and industrial complexes.

This type of boiler is used in buildings that are significantly removed from the city. Aggregates are also good because they work autonomously and do not depend on electricity.

Description of electric boilers

Electric boiler Beretta-Chao does not require special permission and approval for use in a private home. The main difference is the programmers of temperature and built-in equipment. Electric boilers are used as tanks for solid fuel assemblies if the firewood is burnt.

Such a scheme is convenient in a small heated area where it is not possible to use a solid fuel boiler with a volume furnace. Among other things, such facilities are relevant in places where there is no possibility to use gas.

Description of universal boilers

Beretta-City boiler belongs to the universal version of the equipment described in the article. The main difference is the ability to use several types of fuel. The work is based on the use of solid fuel, while other types can be used as a supplement.

We are talking about electricity, gas and liquid fuels. This feature makes it possible to operate similar facilities in the localities under different conditions.

Design features of universal boilers

Boiler "Beretta-24" universal has a minimal complete set, which assumes the presence of a water jacket, a body, and also a combustion chamber. In the role of supplement can act automatics, thermostat, pump, and security system. As a rule, the burner is not included, and the consumer will have to purchase it additionally.

If you decide to choose a universal wall boiler Beretta, you should know that its housing can be made of cast iron or steel. As practice shows, the owners resort to repairs of such boilers most often, in this case we are talking about a cast iron version of the device. Among other things, cast iron is heavier than steel.

Recommendations for the installation of gas boiler equipment

In order to ensure that the failure of the gas boiler does not occur ahead of time, the rules recommended by the manufacturer during the installation of such devices should be followed. The heating system should be adjusted to P = 1.8 atm. The master must check all connections for leaks. For the boiler must be installed voltage regulator. Experts recommend to purchase and install an uninterruptible power supply in addition.

It is important to remember that in no case should antifreeze be added to the heating water. This may damage the gasket. In the simplest case, the consequences are leaks in the heating system.

Installation requirements

Malfunctions of the gas boiler in most cases the consumers manage to solve independently, as they are displayed on the display of equipment. However, in order to eliminate the unpleasant consequences during the operation, it is necessary to use the recommendations that should be taken into account when carrying out installation works. Thus, it is important to properly prepare the room where the boiler will be located. Its area should not be less than 4 square meters, the ceiling height should be equal to 2.5 meters or more. The door that leads into the room must have a minimum width of 80 centimeters. The equipment should be illuminated in a natural way, so you need to ensure the presence of a window opening: 0.3 square meters of its area should account for every 10 square meters of the room.

When installing floor gas boilers, you must be concerned about the intensive ventilation of the room. This is due to the fact that the combustion of gas is provided by the influx of fresh air. Oxygen flows from outside must enter the room through openings with an area of 8 square centimeters per kilowatt of equipment. When constructing a gas pipeline, only metal should be used. As for flexible hoses, they can only be used to connect individual devices. When installing floor gas boilers, the section of the chimney must match the performance of the unit. If this parameter is equal to 30 kilowatts, the diameter should be 130 millimeters. With an increase in equipment capacity of up to 40 kilowatts, the diameter should be equal to 170 millimeters.

Additional recommendations for installation work

In no case should you not allow the chimney sectional area to be smaller than the characteristic for the connection hole. The chimney must be brought out above the ridge by 0.5 meters, this indicator is minimal. The power supply to the boiler must be provided with an automatic system with a set current and thermal protection. In order to avoid gas leakage, it is necessary to install a gas analyzer in the room, which has an electric valve that timely cuts off the gas supply.

The basement can be equipped under the boiler room only if it is a single-family house for private use. In the case of multi-storey multi-storey buildings, installation work that involves the installation of a boiler should not be carried out in the basement.

Conclusion

If you decide to choose a wall gas boiler, then its installation can be made for the purpose of equipping an autonomous heating system with central heating. For this, it is necessary to have a supplied gas main and a room that must meet certain standards and requirements. Only in this way will it be possible to ensure not only the effective operation of the equipment, but also the safe functioning of the device. After all, the rules are dictated not by bureaucracy, but by the sad experience of using gas boilers.