Benefit how to make an onion

Why do you need a wooden bow, probably, many will answer, but how to make a bow, will answer a few. To begin with, the bow is a sporting weapon. It is used in various shooting competitions. The modern bow has nothing to do with such a small arms of the times of Robin Hood. Of course, the basis is the same. Flexible rod, stretched on his bowstring and arrows. Here, in general, and all the similarities.

And how to make a bow at home? First you need to pick up the material. There is a feature. In the summer, in the spring, or in the autumn, that is, when there is no snow, we find a blank for the base. It can be: birch, oak, ash, juniper. We choose what we need, and we go to wait for the winter. At a temperature, within 15 degrees of frost, we cut off the planned workpiece. At the same time, we pay attention that it does not have knots, paths from bark beetles, cracks, any other damages. Cut the need for the bow for longer than the bow itself. For what, you ask. Cracks may form during the drying process. And this surplus will be useful. We remove the damaged part, and the length of the onion will not suffer. If, after drying, everything is fine, no damage was formed, just saw off the excess part of the billet.

How to make a bow from a tree so that it lasts a long time? Everything will depend on the proper selection of the material and its drying. Without removing the bark, having installed vertically and having greased each end of the billet with oil paint, we begin the drying process. It is carried out at a temperature of 20-25 degrees. And the temperature should be constant, and the premise aired, so that the air was not completely dry. If the temperature regime at the drying stage does not match the claimed temperature, internal cracks may appear on the workpiece. They will soon make themselves felt, and your bow will not last long. The material is dried for a long time. This can take two months and five months. Everything will depend on what the drying conditions are.

Now, after the workpiece has dried, we think how to make a bow from it. Our workpiece is something like a shank from a shovel. Here it is necessary to make a flat board out of it. To do this, you can use an ax, a hacksaw or some other carpentry tool. The thickness of the board should be about three centimeters.

The workpiece begins to acquire a different appearance. We approach its markup. Our material should be as flat as possible. After applying the marking, we begin to separate the extra onions from the future onions. The result should be the following: a straight board whose narrowed ends expand to the middle. That is, it turned out to be an extended long diamond.

Having figured out how to make a bow at the initial stage, we move on to a more complex process. This is evaporation.

This is the most crucial moment that will give the final shape to the onion. Therefore, it must be taken responsibly. You can make any shape. For example, you want the bow to bend only the shoulders. To do this, we work the ferry on both shoulders at once. Do this until the shoulders of the workpiece become elastic. After that, our workpiece, placed beforehand in a kind of slip-up, begins to be fixed, or in another way - zanovolivatsya. Used bars that fix the bending of the bow, both from the outside and from the inside.

So, how to make a bow we almost figured out, it remains to remove it from the slipway, after drying, to process and bring the matter to an end. To tighten the bowstring, it is necessary to make fasteners on the ends of the bow. There are many options. You can make a metal fastener or a bone tip. But the simplest option is a step, which is done at the end of each shoulder, to fasten the string.

To ensure that the onion is not exposed to moisture, it must be treated with hot wax, and at a depth of not more than 3 mm, so that the onion remains elastic.