Awnings for PVC boats with their own hands how to do?

Fishing from the boat is considered a special pleasure among lovers of "quiet hunting". Even a small boat allows you to choose the best fish places or follow the door post. At the same time, I want the ship to be as comfortable as possible, and staying on it does not distract from my favorite occupation with various trifles. Given this, many fishermen make tents for PVC boats with their own hands. They believe that only self-made designs can combine the main characteristics: practicality, quality and low cost.

Do you need a tent?

Almost any fisherman will answer this question in the affirmative. This device perfectly protects from the rays of the scorching sun, creates a shadow in which you can put food, bait or just water. It is also simply irreplaceable when the rain comes. Some masters make tents for PVC boats with their own hands so that they can shield the captain from the waves while driving. Also, such products are very good in the parking lot. They can cover the cargo and hand baggage left inside.

Store or homemade products

For today on sale it is possible to find weight of every possible kinds and designs of such products which differ the quality, functionality and cost. However, most fishermen prefer to make tents for PVC boats themselves. This is due to the fact that high-quality and practical products are quite expensive. And sometimes their price exceeds the cost of the boat itself. Also, when you make an individual canopy, you can take into account some of the individual features of a particular ship model or personal wishes of the end user.

Where to begin?

This question is set by the novice masters when they are going to make an awning on a boat made of PVC. How to make a quality cover with your own hands, while spending the minimum amount of money? Professionals in such cases are recommended to first determine with the type of construction. The fact is that there are several types of such products, which differ both in the complexity of manufacturing and in their functionality. You should consider the most popular of them and decide on the destination.

Parking

This product is used to protect the insides of the ship and the things in it at the time of parking. For this purpose, a fully enclosed canopy for a PVC boat is suitable. The advice of specialists at the same time converge on the fact that it is best to use tarpaulins or other durable materials that can withstand the exposure of moisture for a long time.

Chodovaya

Usually, it is this type of product that is meant when asking how to make a tent for a PVC boat. The advice of specialists is quite different and sometimes contradictory. The fact is that such devices are designed to protect against sun, wind or rain at the time of vessel movement or at anchorage. This tent can have several opening sides, which make fishing convenient and comfortable. However, the very design of such a product can be very diverse. It directly depends on the type of boat and the personal preferences of the manufacturer. Often, even the factory tents are subjected to all sorts of improvements, their appearance is greatly altered. Some fishermen consider this type of shelter to be the most optimal and practical, so they try to stop on it.

Nasal

These are the most common factory tents for PVC boats. Photos of their designs can often be found on advertising brochures of specific models or pleasure boats. Such awning closes the boat from its nose by a third or even half the body. It perfectly protects the ship from the waves while moving and creates a good shadow for the captain. In this case, usually the free space of such systems is limited to the open rear part.

Frame

A strong base is usually needed only in those cases where the coating can not be pulled on the existing fittings of the vessel, or a high-level construction is planned. Therefore, determined with the fact that you need a tent on a boat made of PVC, how to do it, pick up the material, you first need to clarify the very structure of the frame. First of all, remember that the product should be strong enough. At the same time, it could be quickly sorted out and collected. Also, the design is created for unique features of the vessel using plant seats.

If the boat does not have the appropriate accessories, then it is purchased separately. Fixation of the finished product is carried out using cords, special fasteners or belts with locks. Given such features of the fabrication of frames, the best way to work is to take water pipes made of PVC or other light materials. Some masters prefer to work with frames from old clamshells, which are also very suitable for such work.

Material

Doing tents for boats made of PVC with their own hands is best made of light materials. For these purposes, very suitable tent cloth or substances that do not allow moisture. It is believed that it is best to use PVC, combining transparent elements with colored ones. But such material will not let in air, and, therefore, will have to make many air vents that are not very convenient to use in rainy weather.

Also for the work you need additional hardware: fasteners, belts with locks, special locking rings, rope or cord. In general, the purpose of these elements is to ensure a strong fixation of the awning on the frame or boat, as well as the correct operation of the opening elements.

Sewing and sewing

If you plan to build the product yourself, follow a few helpful recommendations:

• Making tents for boats made of PVC, it is best to create them from cheap cloth or old rags. It is important to do all the work as it would be done with expensive material. This is necessary in order to understand all the features of the boat design, adjust the fabric directly on the vehicle and see certain defects.
• Usually the fabric is immediately pulled onto the frame or boat, and then it is chocked. In place immediately note the location of strong inserts, rings, ropes and other accessories. Also, all necessary holes are made at once.
• At the next stage, patterns are created from the finished model. They should be made of cardboard, separating each element between the seams. The bigger and smoother the piece, the better. It is very important to avoid the formation of a large number of parts to reduce the length of the seams.
• After the templates are ready, they are used to create a pattern. It is very important to consider that the trimming process produces several centimeters more than the template to leave some material for the formation of strong seams.
• Next, the construction is assembled, and for gluing all elements glue is used. It will not only facilitate sewing, but will also significantly strengthen all joints, making them sealed.
• Then the sewing process itself is performed, with the help of which all the main elements of the tent are assembled.
• At the final stage of the work, it is necessary to install the fittings and fasteners parts using special clamps or glue. After that, the edge is stitched and dense patches are installed in places where strong friction is planned.

Advice of specialists

Professionals also give many practical recommendations:

• Studying the question of how to make an awning for a PVC boat with your own hands, the advice of specialists is very diverse and unusual. But they all boil down to the fact that the design should be created for a specific model of the swimming device and taking into account the personal wishes of the end user. The main thing in a finished product is convenience. Even the most durable and reliable tent will not be of any use if it is difficult to arrange or it will interfere with fishing itself.
• Sometimes it is much easier to buy a cheap tent, from which you can later build the whole structure, than buy very expensive material and cut it yourself. However, one must be very careful, since such goods do not always correspond to the declared characteristics. Usually experts take them only for the sake of racks, which are great for their needs.
• The glue for jointing the seams should also be chosen very carefully. It should be combined with the selected materials without eating them. Otherwise, the connection points will be greatly weakened.
• Making seams is best done using a sewing machine. It will not only allow you to get a quality product, but also greatly facilitate all work.
• Even the experienced owners of small boats believe that the process of cutting and sewing is best entrusted to a specialist with the appropriate equipment and work experience. This guarantees a high quality of joints and does not significantly affect the original cost.
• There are special impregnations and other compounds that betray tissue water repellent properties. They appeared relatively recently, but have already proved themselves positively among fishermen. Some use them for processing clothes. It is these compounds that are very well applied before use, since this can significantly increase the life of the finished product.
• All necessary accessories can be purchased in specialized stores. At the same time, some manufacturers sell their products in sets that are optimally suited for the creation of the tent. However, this is designed for typical designs. And almost always have to buy accessories on the elements. Given this, it is worthwhile to specify in advance the exact number of necessary details.
• Threads that are used to create seams should also not be exposed to moisture. It is unacceptable that they rot and strongly stretch. And additional impregnation will only improve their properties.

Conclusion

Based on the information provided, it can be concluded that the tents for PVC boats are made with their own hands quite simply. However, this will require the availability of tools, the possession of appropriate skills and a lot of patience. It is very important to take a responsible approach to the choice of the type of material and the technical solutions used in the design. Therefore, novice masters try at first to enlist the help of a specialist or a person with experience in this matter.