A monkey from plastic bottles own hands

Plastic bottles are a unique material from which you can make a lot of interesting crafts. If you put a little effort, then you can make an interesting toy from a garbage or a storage tank for small things. Very original looks monkey from plastic bottles. How to do it?

What will be required

To make a monkey from plastic bottles turned out to be original and beautiful, it is necessary to prepare all the tools and necessary material before starting work. For the manufacture of crafts you will need:

1. Plastic containers, which taper in the middle.
2. Paints. In this case, it is better to use acrylic. If there are none, then you can replace them with regular gouache in combination with acrylic lacquer.
3. Cardboard.
4. Brushes.
5. Good quality glue.
6. Knife and scissors.

Preparation of containers

So, how to make a monkey from plastic bottles? First of all, prepare the tanks. They must be thoroughly washed and cleaned of labels and glue residues. It is recommended to dry the bottles before starting work. After that, you can start creativity.

From each bottle it is necessary to cut the neck: one is cut to the middle, and the second - below the middle. This part will serve as a lid. Plastic bottles should be chosen so that after removing excess parts one container would enter the second without difficulties.

The process of staining

A monkey from plastic bottles is almost ready. Now you need to color it. To do this, both parts of the figure must be made together so that the box is formed. For coloring, use acrylic paint. Such a coating will not be washed off. If there is no such paint, then you can use gouache. However, upon completion of work, the finished product will need to be coated with acrylic based varnish. As for the color, you can choose to your taste. It can be orange, brown or yellow.

On the top of the workpiece is to draw a piece of muzzle with eye sockets, using a darker tone. When the first layer of paint dries out in the trunk area, it's worth drawing a tummy in the shape of an oval and a lower face with cheeks. All this should be well dried. In conclusion, you need to make a monkey mouth, nose and eyes. To do this, it is better to use white paint.

Ears and Tuber

A monkey from plastic bottles is painted. Now you need to make her ears. This will require brown cardboard. On the back of the sheet, draw an approximate diagram of the parts, and then cut them out. You do not need to penetrate the middle. It is enough to cut out the blank of white color, which will be smaller than the tab of the cardboard, and then paste it inside. The obtained parts must be glued.

Before this, the product should be covered with acrylic lacquer, if gouache was used for coloring. Now you can fix it with glue ears. That's all. Now you know how to make a monkey from plastic bottles. If desired, on the upper part of the figure you can paste a chub, made of brown cardboard.

A monkey from a plastic bottle: a master class

There is another simple way to make interesting monkeys from plastic bottles. To do this, you will need:

1. A bottle of "Aktimel" or yoghurt "Rastishka".
2. Paper napkins.
3. Gouache.
4. Paint.
5. PVA glue.
6. Artistic brush.
7. The paper is colored, preferably brown.
8. Scissors.
9. Water.

Manufacturing process

How is the monkey done ? With your hands from plastic bottles you can create a very original crafts. To begin with, you need to tear pieces of paper napkins into pieces. If they are double, then they should be stratified. Glue PVA must be diluted with a little water. The resulting solution should be applied to the surface of a pre-prepared container. On top you need to put pieces of napkins. They should also be impregnated with glue. This will make it easier to apply paint. In a similar way, you need to paste the entire bottle.

When the glue dries, you can gently paint the workpiece gouache. Apply several layers of paint better. Thus it is necessary to draw monkey muzzle, tummy and pens.

At the end of the paper you need to cut out the ears and the chub, and then gently glue them. That's all, a beautiful monkey is ready.