"Whirlwind" (well pump): an overview, description, characteristics and reviews

For wells of different depth, special pumps are used to pump water. Devices of this type operate on the 220 V. The Vikhr company makes their modifications of different power, and many devices are manufactured with high conductivity capacitors.

The main parameters of pumps include operating power, overload and nozzle pressure. To understand the pumps of the trade mark "Whirlwind" in more detail, we must consider the advantages of existing modifications.

Overview of the device CH-50

The said "Vortex" drain pump is produced with a through capacitor. If you believe the experts' arguments, then this model is able to withstand a lot of pressure at the entrance. Also worth noting is the good conductivity of the capacitor. In this case, problems with the rod arise very rarely.

The pushers at the pump of the presented series are applied with overlays. Many experts say that they do not need frequent lubrication. There is a modification of the presented type in the region of 33 thousand rubles.

Opinion about the model SN-60

This fecal pump "Vortex" is produced with a large condenser box. At a depth of over 20 meters, the model feels confident. The pressure reserve of this modification is quite large. Numerous reviews emphasize that the device is equipped with a high-quality unit. Protection at the pump is used in class PP30.

Attention is tracked and compact pushers. As the consumers confirm, they cope with the overloads from the plates remarkably. The total working power of the modification is at 400 watts. Limit pressure from the plates does not exceed 4 bar.

The plug for the modification of SN-60 is applied at 3.4 cm. Many experts say that the lining under it is selected for a small thickness, but it wears out quite slowly. Power is supplied through the condenser unit. Attention is also due to the fact that the modification is often used for wells.

It is worth the well pump "Vortex SN-60" in the range of 22-23 thousand rubles.

Reviews of pumps SN-80

Pump "Vortex SN-80" is produced with a contact capacitor box. The adapter for this modification is used on the terminals. The rated voltage of the pump is at 200V. The rotor unit is not in this case. The return rod is used for small diameter, but it is fixed in the device rigidly. The indicator of working power is only 340 W.

The coupling on the output is installed with an adapter. At a depth of 30 m the device works without failures. As practice shows, for the hydropower plant, this modification does not fit well.

Pushers are used with steel plates. And if you believe the experts' arguments, then they are erased very slowly. In the upper part of the structure there is a protective cap. Through it, the user is able to check the lubrication of the plunger.

The price for this pump starts from 34 thousand rubles.

Overview of the CH-90

This pump is made with an adapter for the condenser unit. In terms of size, this modification is not distinguished among the previous devices. If you believe the opinions of experts and consumers, the device is able to work in wells at 30 m. Many experts say that the pushers are able to withstand a pressure of over 3 bar. Protection for the model of the presented series is of the class PP31.

The valve in the device is used only for high loads. The CH-90 pump operates at a voltage of 220 V. A special bushing is used to secure the rod to the holder.

Separate attention in the device deserves a solid body. The rack is made of brass. Directly the lid curls quite simply. The terminal box of the model is protected perfectly.

The maximum overload indicator is 4 A. The diameter of the output valve is 3.4 cm. The coupling of the return mechanism is used with an adapter. By the way, at a depth of 50 meters this device can also be operated. The price for this pump fluctuates around 33 thousand rubles.

Opinion about the model CH-50N

The CH-90 pump is often operated at hydroelectric power stations. And, judging by the feedback, the conductivity is rather high. It should also be noted that the index of the pusher force is at the level of 5 N. True, some experts say that the drawback of the model lies in the weak fixators - the lining under them is selected by the manufacturer of the copper type. Directly the rack is made entirely of brass.

It is also worth noting that the adapter is in the upper part of the structure under the hood. The main pusher cylinder is of small size. The plunger of the pump in this series is used with two pins. Some experts say that at a depth of more than 30 m this device is prohibited. However, its maximum load parameter is as much as 3 bar.

It is worth the construction of the presented series in the range of 23-24 thousand rubles.

Reviews of pumps SN-55N

The mentioned "Vortex" pump receives, as a rule, positive feedback. Among the features of its device, it should be noted a high-quality sturdy rack and a reliable condenser unit. The conductivity of the modification is at the level of 3 nm. It is also important to mention that the pushers in the device are used with copper pads. The plunger of the modification is used with two contact adapters. The nozzle itself does not need frequent lubrication.

Particular attention in the device deserves a system of protection, which is used in class PP31. According to reviews, failures in the mechanism, thanks to it, occur very rarely, and at a depth of 20 m the model feels confident.

For powerful power stations, this modification is not bad. However, it is important to consider a small overload parameter. The axle rod at the pump of the series presented is of small diameter. And a manometer is not provided in the standard configuration of the device.

The price for this pump starts from 22 thousand rubles.

Overview of the device SN-65N

At the trademark "Whirlwind" the CH-65N pump is manufactured with two plungers and a high-quality capacitor box. According to consumers, the rod at this modification flies rather rarely. The width of the pushers is as much as 33 cm. Many experts say that the model can be operated at a depth of more than 30 m. The pushers in this case are made entirely of steel.

The return valve is used a small width, and the maximum pressure it is able to withstand at 4 bar. Adapters under the filter are not provided for the system.

It should be borne in mind that this device is not designed unambiguously to work on collectors.

It is necessary to modify the presented series within 25-26 thousand rubles.

Opinion about the model SN-50R

The SN-50R pump produced by Vikhr, in general, receives good results for the high quality of the condenser unit. The working power of this modification is as much as 500 V. And, according to experts, its pushers are able to cope with large overloads. Separately, it is important to note that the plunger of the modification is used with two bushings. Many consumers say that the device is well suited for operation at hydroelectric stations.

The return clutch is used with an adapter. Lower pushers are only used with brass pads. The pump capacity of this series is only 4.4 ms. There is no sealing bushing above the bar in this case. Among the shortcomings, buyers note a small throughput at the output, which is not more than 5 ms.

You can buy a pump in our time at a price of 30 thousand rubles.

Reviews about pumps SN-60R

"Vortex" - pump CH-60R - is often used on collectors. If you believe the reviews of consumers, then the performance of the model is quite high. But for hydrostations, this modification does not fit uniquely.

Also worth noting that the model has only two pushers. The return plunger is of small diameter, and a protective sleeve is not provided for it. Special attention should be paid to a compact adapter - a capacitor for it is selected by a contact type.

It is worth a device within 33 thousand rubles.

Overview of the device SN-80R

The CH-80P pump, produced by the company Vikhr, boasts high performance and a high-quality rack. In the central part of the modification there are adapters for the condenser unit. Many buyers say that the pump starts up pretty quickly. The rotor is selected for it with a double armature.

Current overloads of this modification are not terrible. Pads on pushers are made entirely of their brass. The conductivity parameter of the modification is 4 μ. The maximum inlet pressure is approximately 2 bar. The return plunger is installed in the lower part of the structure.

It is also worth noting that protection at the pump is of the class PP13. The total weight of the modification is 5.7 kg. The pressure gauge is not included in the standard equipment. The working clutch of the model is used with only one filter.

It is worth a borehole pump "Vortex" of this type of about 35 thousand rubles.