Transferring data from "Android" to "Android": step by step instruction

A considerable number of users who decide to purchase a new device face the problem of transferring data from their former device to a new one. The transfer of data from "Android" to "Android" can be carried out by several methods, which we will talk about today. First, let's look at the transfer of contacts from the phone book, since this scenario is most often encountered in practice.

Using a personal computer

In order to transfer data from Android to Android using a personal computer, we will need several components, such as an old smartphone that stores the information we need, a PC or laptop, and a USB cable. About the software that will transfer data from Android to Android, then you should mention the program called MOBILedit.The utility should be downloaded to your computer.If you downloaded the archive, then unpack it and install the program. The rookie will be completed, we go in the "Mobile Edith".

It should be noted that you will need to activate the utility beforehand. By what means - legal (buying a license for money) or illegal (cracker-krak) - it's up to you. We will not give advice and instructions on this part, and also to write down the instructions. Immediately go to the beginning of the operation. So, to carry out the transfer of data from "Android" to "Android", you should run "Mobile Edit" and download the drivers necessary for working with mobile devices. There is one workaround that will allow the user to save his time and nerves. To do this, we simply select the manufacturer of our device and confirm our consent to the driver installation process.

If everything is ready

After the installation has been completed, proceed to the next step. To do this, open a tab called "Phone." There we find the "Connection by cable". When the program prompts you to connect, select PC Sync. Note that in some versions of the program the name differs, but, in general, everything looks like. Therefore, it will be difficult to make a mistake.

By the way, it depends not only on the version of the program, but also on which brand (and also the model) you have the device. Then it remains to enable debugging via USB. This function is available on all devices running the operating system "Android."

How to activate USB debugging on a smartphone?

First go to the settings of our device. Then go to the item called "Developer Options", where we search for the corresponding function and put a tick in the miniature window allocated for this. When this is done, the data transfer adapter (and in this case the USB cable) will begin to perform its immediate duties.

So, now back to the program "Mobile Edit". In it, we will manage the actions that will ensure the transfer of the contact database from our old device.

Creating files

In the left part of the working panel of the program you can see a tab called "Phonebook". There you must select the export function. Specify the file extension. In our case, this should be csv. Also show the computer or laptop where to save the file, which we are now preparing for export from the old device.

Enter the name and click on the button, confirming the process. Thus, the first stage of the operation must be successfully completed.

Transferring everything to a new device

We take our new device, which, in fact, we need to download contacts. We have already prepared the export file, and the only task that now faces us is to upload the same file to our new smartphone. This can be done by various methods of communication. These include obsolete ways to boot via USB cable and the "Bluetooth" function, as well as a relatively new one via Wi-Fi.

The only thing you need to do in the program is to choose a position called "Import". And there we already specify the path to the file that we exported earlier with contacts. It turns out that we dismantled such an operation as transferring data from "Android" to the computer and in the reverse order.

Transferring data from "Android" to iPhone

If you recently purchased a device running the operating system iOS, and previously used the device based on the OS family of "Android", it is not superfluous to learn how to transfer data from the old smartphone to a new one. Are you ready to move to a new platform, but want to at least partially save the data? In that case, read on.

What is required?

To transfer data from Android to iPhone, we will need to install a program called Move to iOS in advance. Perhaps, besides this, we will need a small amount of time, care and the ability to clearly follow the elementary instructions.

Preparing the workspace

In order for the data exchange to be successful, it will be necessary to prepare tools in advance, which, we may say, will operate. What is included in this set of procedures? First, we check the stability of the connection to the Wi-Fi access point, as well as its activation, along with the activation of the receiver module on the smartphone. Programs "Android" for the transfer of data we now do not need, except that only that which has already been said before.

Next, we connect both devices to their power sources. Check the memory status on your iOS device. It is necessary that the exported file fit on the new smartphone. Otherwise, the data transfer processing process will be interrupted.

We use functions

When you configure a new device based on the iOS platform, open the menu that is entitled "Programs and Data". There you can find a function called "Transfer data from the Android operating system." It is possible that the configuration was performed earlier, if this is the case, then we simply take and delete data from the device running iOS. Well, if the data is important and you do not want to lose it, you can perform the transfer manually, it will take a little time, but the files will be saved.

We apply the program

So, open Move to iOS on our Android smartphone. There we press the button "Continue". The terms of the license agreement will be displayed . Of course, no one reads them to you, just agree with the relevant provisions. To do this, click "Accept". After that you will be able to continue working. Now the "Next" button's queue. In the upper corner you need to find the "Code search" element. We will work with him further.

Expecting execution

Open the screen under the name "Transfer from the OS" Android ".Where we press" Continue. "We wait until the program gives us a ten-digit code.The user should know an interesting fact: a device running the Android operating system can display a notification that the speed The connection to the international network has been reduced, in fact, it is not worth paying attention to, just ignore the notice, since it carries almost no load.

Use the received code and select the content

When the ten-digit code is generated and provided to the user, you can proceed to the continuation of the data transfer operation. By the way, now we need to display a screen in which we, in fact, will do it. We take our device running OS "Android" and there we select the files that we want to export to iPhone. After the choice is made, we press the button "Next".

At this point, you should act carefully, without touching the devices, between which, in fact, there is synchronization. You can monitor the progress of the operation using the download indicator displayed on the screen. When everything is completed, the indicator will show it. You will also be able to verify this with the help of "Android", which will issue a corresponding notice. It should be said that the time can not be determined unambiguously, since the procedure can take up different intervals. It all depends on how much data you are trying to export first and then import.

Set up iPhone after transfer

When you see that the indicator on the device running the iOS operating system has reached the end, you can click the "Finish" button on the smartphone with the OS "Android." Next, click on the iPhone "Continue". This will allow us to complete the procedure for sending and configuring the device for its further use. In general, everything is simple enough, you just need to follow the instructions that appear on the screen.

The final stage

We can only make sure that the exported data was correctly received by our iPhone. It is possible that the transfer failed at some point. If this is the case, then the procedure can be repeated manually, by transferring individual files in other ways.

About other methods of data transmission

If we talk about other, more complex ways, we can mention the use of an email account in the Google Mail system. Also possible with the use of cloud storage - "Yandeks.Disk." Among the exclusively mobile methods is the use of SIM cards and flash memory drives. But the most popular and convenient is still the use of a personal computer or a laptop with a smartphone connected to it.