Thermo-applications for clothes - a new life for your favorite things

What if your clothes are spoiled for some reason? For example, put a stain on the wine or the baby fell unsuccessfully and broke new jeans. Is it possible to immediately throw things away? Of course not. Today, there are new modern technologies that will help keep things or just create a new design. From the article you will learn how to paste a thermo-application on clothes.

Stickers made of cloth

Do you want to add a zest to your things or hide a noticeable defect on them? The correct option is a thermo-application on clothes. As a rule, special labels are made of thick fabric, and on the reverse side is an adhesive layer. Most often they are used to hide defects in clothing.

For work you need: an ironing board, an iron and a cotton fabric. First you need to remove the protective layer, which is located on the back of the sticker. Then put the iron on the ironing board, but make sure that there is no water in it and the steam function is off. Otherwise, you will spoil your clothes. Turn on the iron and let it heat up. He must be very hot.

Put the thing you need on the ironing board. It must be carefully smoothed with hands so that there are no wrinkled sections. In the place where the application will be, put a sticker without a protective film. Top with a cotton cloth in one layer. If you glue your jeans, you can do without additional material.

It is necessary to do this procedure very carefully, since the sticker can move. At this place, iron carefully. If the sticker has not yet stuck, do not stop. Smooth until you see the result.

Thermo-application of rhinestones for clothes

It is not always necessary to hide a defect on things. Very often you just want to decorate and update your clothes, give it a new, original design that no one else has. Strasses are used for this. Thanks to them you will give chic and shine to your appearance.

Strass thermal applications for clothes are made a little more complicated than fabric ones. Many are sure that this is a delicate and even a jeweler's job, which requires diligence and attentiveness.

Before gluing the rhinestones with an iron, try first on a small shred so as not to spoil your thing. Then go directly to your clothes.

Put the thing on the ironing board and warm the iron well. Do not forget that there should be no water in it. Then put the clothes on the board. On the site where you plan to paste the rhinestones, put a piece of cloth between them. This is to ensure that the glue does not spoil your thing. And then lay out the rhinestones. Cover them with a small scrap, preferably wet. Now put the iron on the rhinestones and hold it for about 12 seconds. During this time hot melt melts. If you use large jewelry, then the iron should be kept for at least 30 seconds.

After the thermal insertion of the rhinestones on the clothes are ready, leave the products for 1 hour. Do not touch things. Wait until the rhinestones cool down well. Now you can be calm, because you should get a beautiful, festive and bright outfit.

Advice

Thermo-applications on clothes do not require much time and effort. But still there are some secrets that every needlewoman should know. Before you do the applique, find out what kind of fabric your thing has. Be sure to look at the label. If it is painted with a crossed iron, then such a product can not be ironed, as the fabric can deteriorate.

Thermo-applications on clothes with rhinestones are more delicate. When holding the iron on the products, do not press on it.

Lightly touch the fabric surface. Under the hot iron, the glue from the rhinestones will begin to spread, respectively, and adhere to the product.