Some tips on how to reset the cartridge

Zero the cartridge - what is it for? The creators of printing equipment receive their main profit from the sale of consumables. Refilling cartridges greatly influenced the decrease in producers' income.

To the situation turned in their direction, the manufacturers have developed a chip - a chip that is installed on the cartridge. In other words, it is a flash memory with recorded cartridge resources. It captures information coming from the printer, which contains the number of already printed pages.

When the cartridge is installed on the printer, the chip seems to be registered and begins to count. As soon as 90% of the preset number is printed, the printer signals that the toner will soon run out.

In fact, the cartridge still has paint. Only the printer with persistence will require its replacement. There are several ways to solve this problem.

The question with laser printers is solved quite easily. You just need to replace this cunning part on the cartridge. For each model of the printer there are own chips, but there are also universal ones that are compatible with a variety of printers.

Inkjet cartridges also contain a chip. But it is made so that it can not be replaced. To solve this problem and is intended to zero the cartridges.

How to reset the EPSON cartridge

Inkjet cartridges of this manufacturer are reset with the help of the chip programmer. This device is easy to buy in any specialized store. You can also use the service programs. The most common of these is a universal program that clears the ink level. It is distributed free of charge. But it is better to apply it only to experienced specialists in this field.

How to reset the HP CB335HE cartridge

First, it needs to be extracted. Then go to the "Service menu" of the printer. To do this, press and hold the Cancel button on the machine. In parallel, click on "OK", then release all buttons.

In the same menu, select "Resets Menu" and click on "OK" again. Find the item "Partial Reset", again - "OK". The printer should now shut down.

Turn on the printer again. You need to select your region and language, and then follow all the printer instructions. If, after all the activities carried out, the ink levels do not show 100%, then the reset of the hp cartridge failed. Repeat all over again. Just replace the "Partial Reset" option with "Semi Full Reset".

How to reset the HP 9XX cartridge

To do this, you need to erase the information about the cartridge itself:

- Take it and turn to yourself contacts.

- In the far left row, gently tape with the first four contacts.

- Put the part in place, close the lid. The printer will print the calibration page itself.

- Take out the cartridge, remove the scotch tape. Contact surfaces from the adhesive wipe with alcohol.

- Now stick the upper four contacts in the far right row with an adhesive tape.

- Return the cartridge to its original position. The printer prints a calibration page.

- Again, get the cartridge, remove the tape, wipe with alcohol.

- It is necessary to install it again in the printer and perform a printout of 41 codes.

In the printout (in the "Remaining Quantities" section) there should be a designation of "100 percent". If it is, then you now know how to reset the cartridge of your printer.