Rubber bump: description and reviews

Every car owner knows how important it is to change the worn parts of your vehicle in time. This procedure is usually performed during maintenance. An inexperienced driver may not pay enough attention to minor details and mechanisms. Because of this, various malfunctions can occur in the machine system.

. One of these components is a rubber bump . Not every car owner knows the purpose of this part. However, its function is quite significant. This element is able to extend the life of the car, make the management comfortable. What is this detail, as well as feedback on its choice from professional mechanics will be interesting to learn about each driver.

general characteristics

входит в состав особого защитного комплекта, предназначенного для сальника и хромированного штока амортизатора. Rubber burglar is part of a special protective kit, designed for the stuffing box and chrome plated rod shock absorber. The mechanism works at elevated loads and speeds. Therefore, it is required to provide high-quality protection for this system. Such a detail, as a bump, contributes to a long life of shock absorbers. And the need to repair this system of the car will come soon. This saves a considerable amount of money.

An anther is put on the bump stopper. This allows to protect the stem surface from loads and mechanical damages. Such a system prevents dirt and water from getting on the stuffing box seal. The baffle allows to gently restrict the stroke of the rod when the shock absorber is fully compressed. On the body will not be made sharp impacts from the wheels. At the same time, the smooth running of the machine is guaranteed.

Also there are rubber bumpers, designed for trucks, vans. They prevent mechanical impacts on the body of the vehicle not only when driving, but also during unloading or parking.

Also there are bumpers that are installed on the hood, trunk or car doors. Their functions are similar. The bumpers are designed to protect metal or other surfaces from mechanical damage.

Breaker assembly

устанавливают в самых разных элементах конструкции. Rubber bumpers for cars are installed in a variety of structural elements. The most important are those that participate in the shock absorber system. This is an integral part of the car system. Its choice depends on the load on the car.

The bumpers are designed to absorb the load on metal and other structural elements, and also prevent sand, dirt or water from getting on the surface. When a load occurs, the material of the bump is compressed, so that the impact force is significantly reduced.

The bumpers for the car can be made in the form of a damper, plates, bars, etc. The configuration depends on the machine system in which a similar structural element is mounted. Most often, soft porous rubber serves as a material for the manufacture of such parts.

In the absence of serious loads, the bump stop is at rest. But when the mechanical effect on the metal surface increases, it works. Most of the load acts on the bump stopper.

Why change the bump?

, бампера, дверей нуждается в своевременной замене. Rubber bump for the trunk , bumper, doors needs a timely replacement. This is especially noticeable when the damper of the front or rear shock absorber is destroyed . In this case, the part is no longer capable of performing its functions. Metal or other surfaces will be subjected to loads, gradually breaking down.

If, when inspecting the car it will be noticeable that the bump block is destroyed (even slightly), it should be replaced. If it is an element of the shock absorber, the machine "crouches" on one wheel. This means that the system is subjected to increased loads when driving. The shock absorber is destroyed. If you do not replace the bump in time, you will soon have to make more expensive repairs.

If the anther, which is on the bump, breaks, the oil may leak out of the shock absorber. Therefore, auto mechanics advise drivers periodically (at least once a month) to inspect the mechanism under the wings of the wheels. When replacing shock absorbers, the bump stopper is also better to change. Even if the material of the part looks complete and usable.

Bumpers for bumper

, багажник для различных видов автомобилей. On sale today is a rubber bump stopper for a bumper , a trunk for various types of cars. These elements of the structure have a different configuration. They are selected in accordance with the shape of the surfaces of the machine to which the protective element is to be installed.

For a bumper the bump stopper can be quite aesthetic. It is installed not only to protect the hood, but also as an element of tuning. Such a detail adorns the car, gives it a stylish appearance.

Bumper for boot

For trunks requires a bumper primarily to those cars that carry cargo. Also such a structural element is able to protect the vehicle during parking, unloading and loading. Therefore almost all dimensional cars intended for transportation of various goods have rubber bumpers.

Side and door bumpers

могут быть выполнены из резины или относиться к роликовому типу. Rubber bumpers for doors can be made of rubber or refer to the roller type. In cars, both types of limiters are used. Rubber bumpers are a bit cheaper.

By mounting the security elements of the type shown, the driver prevents mechanical impact on the door and its hardware when the door is slammed. This is especially important for taxi owners. Carrying passengers, they sometimes face passengers' inaccuracies. The baffle prevents a heavy load when the door is slammed shut.

Side protective elements often have the form of a rectangular bar. This allows you to avoid trouble when parking. This is especially important for dimensional cars, as well as with insufficient experience of driving a vehicle owner.

Requirements for bumpers

Due to certain conditions, the trunk, doors, shock absorbers, buffer are in need of additional protection . в зависимости от места своего расположения должен характеризоваться некоторыми обязательными качествами. The rubber hammer , depending on the location of its location, should be characterized by some mandatory qualities.

The density of the material must correspond to the expected level of loads. Too stiff material can not fully shrink when impacted. The load will almost completely be transferred to the surface. Too soft bumpers with mechanical influences can simply be destroyed immediately. Therefore, technicians select the optimum hardness of rubber for a particular car system.

Also, the bumpers must be resistant to high temperatures, deformations. They should not lose their qualities even in very hot weather or frost. If the temperature changes sharply, the material of the protective element must remain the same functional. Also presented products should be resistant to chemical, mechanical environmental influences.

Reviews of the material

, для дверей, амортизаторов или других систем автомобиля, водитель должен рассмотреть несколько вариантов их исполнения. When choosing a rubber bonnet bump for doors, shock absorbers or other car systems, the driver should consider several options for their execution. This leaves an imprint on the performance characteristics of such devices.

In addition to rubber parts, today produce still silicone and polyurethane bumpers. The stores offer a wide selection of such protective elements. Each material has a number of advantages. Sometimes the rubber elements are much inferior to them.

If in the area where the car is operated, there are severe frosts in winter , it is better to use silicone bumpers. In such conditions, rubber becomes harder. In this case, the force of strokes during the movement is significantly increased.

Penopoliuretanovye varieties in addition to their excellent anti-vibration qualities are also resistant to the aggressive environment, chemicals. Therefore, rubber bumpers are gradually moving to the background. Today, more advanced materials are being used.

Shock absorbers for shock absorbers

, грузовика или легкового автомобиля обязательно применяется в системе амортизаторов. Rubber bump for a van , truck or car is always used in the system of shock absorbers. Their shape, size and diameter differ depending on the model of the vehicle.

The bumpers for the front and rear shock absorber are characterized by practically the same device. The difference is due only to differences in the diameter of the rod. Some brands of cars have more powerful front struts, while others have rear ones.

In trucks, often a large diameter differs rear bump. At cars more often such indicators are inherent in the front shock-absorber. This is due to the load distribution. The big weight in passenger cars is concentrated in the front. Under the hood is the engine and other mechanical elements. Therefore for such machines it is important to strengthen the front shock absorbers.

Types of shock absorbers for shock absorbers

призван эксплуатироваться в различных условиях. The rubber bumper is designed to be operated under different conditions. In this case, the developers of the vehicle take into account the quality of the road, climatic features, maximum permissible speed and other parameters. In accordance with this, four main groups of shock absorbers for shock absorbers are distinguished.

On sale are standard models, as well as for driving on the highway. There are protective elements for comfortable driving or for sports cars that participate in competitions. The main differences are the porosity and softness of the material.

Recommendations for selection

следует сначала установить тип модификации детали, которая уже стояла в транспортном средстве. When choosing a rubber stopper, you must first set the type of modification of the part that was already in the vehicle. However, in some cases, standard safety features are not the best option for this car. Therefore, when buying it will be more correct to consult a good auto mechanic.

For sports driving it is necessary to use materials of increased hardness. Their porosity will be much less than other types of parts. To ride was really comfortable (with good quality roads), you can give preference to soft bumpers. In production, standard types of presented parts are installed in shock absorbers.

, каждый владелец автомобиля сможет подобрать для себя лучший вариант. Having considered such an element of construction as a rubber bump , each car owner will be able to choose the best option for himself.