Replacement of the kitchen facade. How to update a kitchen set

Over time, any kitchen set becomes obsolete, its appearance deteriorates. Buying new furniture is not an expensive pleasure, so the replacement of the kitchen façade will help. In this case, you can replace it with a new one, or simply repair the surface using various materials. In this case, self-adhesive films, paint, wallpaper, decorative inserts, etc. will help. Below are the basic principles of updating the kitchen set.

Selection of new facades

First, you need to decide on the design, and then move on to technical issues. The most important task is to choose the right material. At the same time, buyers value not only its characteristics, but also its value. The most cheap are the facades made from chipboard, so they are chosen with a very limited budget. If you properly care for the material, it will last a long time. However, after a while it will begin to crumble and swell.

Facades of MDF are considered the most optimal. Products made of it are lighter and cheaper than wood, do not deform during operation, are not afraid of fungi and mold. If they are facing, then the material will last a long time.

Glass facades make the headset bright and attractive. They perfectly withstand the effects of chemistry and are easily cleaned from various contaminants.

Metallic (aluminum) coatings are strong, resistant to deformation and durability.

You can also make the facade of the kitchen set from plastic. This material produces high-quality and durable products. At the same time, careful care is required.

Wooden facades (from the array) - the most expensive option. You need to think carefully about your choice, because the cost of replacement is practically the same as the cost of the new headset.

Replacement instructions

Very old kitchen sets require facade replacement. How can you perform these works? After choosing the material, you need to decide on the color solution. It is important not only the taste of the owner of housing, but also the compatibility of products with the interior and decorative elements. For small kitchens suitable light colors - they will visually expand the space. Dark designs look great in large rooms and will create an excellent contrast.

Another important step is the performance of measurements. This process requires maximum accuracy, otherwise new elements may not be suitable. It is necessary to measure all doors, racks, crossbeams and other parts that require replacement.

After that go to the installation of facades (if necessary, the accessories can be replaced). For kitchen furniture will need new handles, hinges and fasteners. In each element holes and grooves are made, after which the doors are hung and fixed. After successful replacement it is worthwhile to think about extending the life of new products. This is possible due to proper care: wiping with a sponge with an ordinary cleaning agent.

Restoration of a wooden surface

Furniture with wooden doors does not always need a replacement, because it can be restored. How to update a kitchen set made of this material? All parts to be replaced are carefully dried and covered with an antiseptic. For the treatment of finished facades paint or wood varnish is suitable.

We carry out the restoration works as follows:

- remove the doors and remove all the accessories from them;
- We grind them with sandpaper (medium- and fine-grained one by one);
- shpaklyu scattered and cracked areas;
- We grind cleanly;
- cover the products with a primer and dry them;
- varnish in several layers;
- return the hardware to the place (new or old);
- We attach the doors to the lockers.

There is no special complexity in the restoration, and its cost can be quite attractive. To perform the work you will need to buy only a primer, a varnish, an emery paper and an accessories (if necessary).

Painting and moldings

An excellent option for quick renovation of furniture is painting. If necessary, the replacement of the facade of the kitchen can be combined with the installation of moldings (decorative overlaid elements). As such overlays semicircular laths will approach. Before removing the facades, we will perform markup to avoid confusing the details. We unscrew all fasteners, remove hardware and updated designs. We clean them from contamination with a rag and dry them. We spread the film and put the doors on it.

Cut off the details of the required length from the molding, cut the corners at 45 degrees and glue them with glue (for wood). We designate the place where the fittings and fixtures will be located. Drill holes with a drill.

Priming the surface and carefully drying. We fill the spray gun with deck paint and start painting the surface from a distance of 150-200 mm. You can create any ornament or pattern - this will require stencils. If necessary, we apply the finishing coat of paint. We fasten the facades to the frame and install the fittings.

Pasting with foil

Below we will talk about how to update the kitchen set with a film. This method is considered one of the most accessible. In this case, you can make a real masterpiece of furniture, because the film is different: smooth, shiny, with various ornaments and drawings. Do not be afraid of the material, because it is resistant to moisture and durable enough. The gluing process is not easy, because only the correct gluing makes it possible to obtain an ideal surface.

The works are performed in the following sequence:

- Choose the color and type of film;
- We measure all the details and calculate the consumption of material (do not forget about the stock);
- remove the facades and lay them on a flat surface;
- level them, clean and degrease them;
- take the film and peel off a little protective layer;
- apply it to the furniture and carefully smooth with a plastic spatula;
- install a new hardware and return the doors to their seats.

The film will adhere well to the surface after only a few hours, so it can be re-glued. If there are bubbles on it, they can be pierced with a needle and well smoothened.

Photo Wall Mural

If you need to replace the facade of the kitchen, then you can use wallpaper. Modern companies are ready to offer a material with a pattern, combined with any interior. Preparation for work is carried out in the same way as in the previous method. We remove the facades, remove the accessories, clean the surface of dirt and paste it with wallpaper. As for the material, it is better to choose self-adhesive laminated wallpaper. They do not need glue, and they are easy to clean. If you want, you can also use paper wallpaper, but they will have to be covered with a transparent varnish. Otherwise, the finish will quickly go away.

Once the material is selected, it is necessary to cut it into account with the rapport (repeat drawing). It is cut without overlapping, and the ends of the doors are painted in a suitable shade. If necessary, unusual furniture fittings can be installed.

Decoupage

A surprisingly beautiful option for updating the headset is considered decoupage. It is based on cutting images from paper, fabric, leather, napkins and gluing them onto the restored part.

To update items (for example, facades from MDF), you need:

- fill small cracks with a special compound - pore filler;
- get rid of large defects with sandpaper;
- cover parts with a primer;
- Cut out the image, the photo, the printed print;
- apply glue on the base and on the back of the picture;
- attach the picture and align it with a roller;
- Apply 3-4 coats of varnish (each layer is aged for about an hour).

Decorative inserts

Replacement of the kitchen façade is not an easy process, so you can update it with special inserts. In this case, a perfect ceramic tile. Number the details, remove them, clean and dry them. Also remove the knobs and fasteners. Painting work is best done on the open ground or ensure a constant supply of air. We lay the facades on the floor, covered with a film, and we plan the places of future overlays.

Apply the tile and, if necessary, adjust to fit. We paste it, cover it with a primer and paint. To get the original drawing on the cover, you can use stencils. The paint is best applied in 2 layers. We return to the place of the handle and attach the doors to the frame.

To choose a way to update the headset, you need to stock up on free time and decide on the costs. How much does it cost to replace the facade of the kitchen? It all depends on the material from which it will be made, and the way it is processed. For example, smooth facades made of pine, MDF cost from 3000 rubles / m ² , milled - from 5000 rubles / m ² . The most expensive products - from oak (will cost at least 10,000 rubles / m ² ).