Planter Standard, diaphragm profiled: description, technical data and installation features

Planter Standard is a profiled membrane, which is a modern building cloth with protective qualities. This single-layer fabric is made of high-density polyethylene, and its outer surface has rounded protrusions, whose height is 8 mm. The membrane is light enough and has high strength, it is used in industrial and housing construction. You, too, can consider the possibility of its application, as it allows you to achieve positive results and helps to save not only the forces, but also the means. However, before acquiring the material, you need to become more familiar with its qualities and installation features.

Description

Planter Standard is a profiled membrane that has a light weight that facilitates unloading / loading and transport. This quality naturally simplifies the installation work. The membrane is reliable and durable. It is ready to serve for 50 years or more. Polyethylene materials have high strength, and the shape of the studs is designed in such a way that the load is evenly distributed throughout the surface.

Point effects are completely excluded. As practice shows, installation work can be completed in the shortest possible time. Planter Standard - a membrane profiled, which is designed to protect the waterproofing, as well as the lower zone of the cap from the effects of moisture. In addition, along the way, you can get rid of such problems as the germination of the roots of trees and shrubs, as well as changes in pressure during draft or shear of the ground. Protect the foundation with this material can be and before carrying out its backfilling. The material can be used to replace the concrete preparation and protect the inner surface of the walls from the effects of excessive moisture. This is both condensate and water.

With the help of the membrane, you can quickly sanitize the facade, and also remove moisture from it. The material allows to maintain the optimum temperature and humidity regime inside the premises. The described profiled membrane is so popular today due to its affordable cost and optimal qualities.

Specifications

Planter Standard - a membrane profiled, which is available in a thickness of 0.55 mm. The exact height of the stud is 7.5 mm. The weight of one square meter of material is 0.55 kg or somewhat larger. Buying this composite canvas, you should consider that it goes on sale, being cut by rectangles measuring 2x20 m.

Consumers who are engaged in construction on a professional basis are often interested in such characteristics as the compressive strength limit. In the case of the described membrane, this parameter is equal to 280 kPa. You may also be interested in the maximum tensile force across and along the roll. This parameter is 280 N / 50 mm. One should also take into account water absorption by mass, which does not exceed 1%, but the relative elongation at break is 20% and even more.

Planter Standard - a membrane profiled (2x20 m) is a material whose flexibility on the bar at a reduced temperature is 45 ° C. The beam radius during the test was 5 mm.

Additional features of the material and its cost

If you decide to purchase Planter Standard, then pay for 1 m ^{2 of} this material will have 108 rubles. One roll contains 40 m ² . If you use a profiled membrane in construction or in waterproofing, the space formed between the canvas and the wall will be freely ventilated, the air will circulate inside, improving the temperature and humidity regime inside the building.

The membrane has not only a high mechanical strength, but also resistance to the effects of chemical aggressive media. The material does not interact with bacteria and fungi, which can actively multiply on the surface of the walls. Laying the Planter Standard profiled membrane can be done without fear that ultraviolet rays will affect it negatively. The canvas can be laid vertically and horizontally, and the elements, if necessary, are joined together on a specially provided flat edge.

Special features of mounting a profiled membrane

Profiled membrane Planter Standard (the price of which is not so high and was indicated above) must be laid down by a certain technology. If necessary, disinfection of wet walls is carried out, and laying can be carried out both inside and outside the building. The walls of the room can be drained in this way. The material is placed mechanically along the perimeter of the walls and floor. The membrane should be reinforced with metal dowels for concrete. In the lower part of the room, over the membrane, the plaster grid should be fixed , which can be made of polymer materials or metal. It is chosen depending on what the subsequent coverage will be.

Features of installation when protecting waterproofing

Profiled membrane Planter Standard, the laying technology described in the article and will allow you to avoid mistakes, can be installed if necessary to protect the waterproofing layer. The latter is obmazochnym or okleechny. If the construction debris and the backfill elements subsequently enter the surface, the layer will not be damaged. As practice shows, the use of the membrane allows you to work in a shorter time and reduce labor costs, thereby saving money. The membrane is best used in place of flat slate, as well as pressure walls made of bricks.

Installation is carried out at a speed of 4 m ² per minute. Lay sheets need overlap, the width of which is 4 ledges. Fixation should be carried out above the level of waterproofing by means of a metal bar or poppet dowels for concrete.

Conclusion

The membrane can be replaced with concrete preparation, which is true with a low level of groundwater. On top of the groundwater, a litter of crushed stone is used for this, the thickness of which can be 10 cm. In this case, the membrane is positioned downwards, and the longitudinal and transverse overlaps should be up to 10 cm.