Lessons of skill: how to wall plasterboard walls

At present, a lot of various materials have appeared, which greatly facilitate the processes of building and repairing premises. One of them is drywall. This is the best solution for creating a modern interior. In addition to the fact that gypsum sheets make it easier to work with problem walls, this material also allows you to make any room unique in terms of design. This article will be useful to those who want to learn how to wall plasterboard walls.

What can be done from drywall

Wall niches, multi-level ceiling structures, decorative elements of the interior, full walls and much more can be built from sheets of plasterboard. This universal material is easy to apply in almost any project. Of course, complex design designs from it require certain knowledge and experience, but even a person who has never worked with this material will be able to paint the walls with gypsum boards. This will require the necessary number of gipsokartonnyh sheets, aluminum profiles, a knife or saw, special scissors for cutting metal, screwdriver and screws. In addition, it is necessary to stock up with a building level for measuring base and new surfaces.

Wall Preparation

Before plastering walls with gypsum plasterboard, it is necessary to prepare them. It is recommended to remove old wallpaper, then the surface must be thoroughly cleaned and covered with a primer. No need to level the walls with plaster, but if there are shallow cracks, they should be puttied and primed. Then everything should dry well, it will take several hours. The next step is to apply a soundproof layer, if necessary. Only after that, the wall is considered fully prepared, so you can proceed with the installation of the box. For the construction of the structure, ceiling and guide profiles are required . To connect the latter, special "crabs" are used. On the perimeter of the wall (floor, ceiling, corners) ceiling profiles are mounted. Then, in their U-shaped grooves, the guide elements are inserted and fixed. Further this construction is supplemented by horizontal profiles with the help of "crabs". That's all - the frame is ready, but before walling with plasterboard, it is recommended to lay a cotton wool or polystyrene over the whole surface area (behind the profiles). Thanks to these materials, the outer wall will be insulated, and the internal one will receive additional sound insulation.

Mounting technology

Next, the sheets are carefully mounted with screws to the profiles. Usually only one layer of plasterboard is installed, but such a wall will not be strong enough. In this regard, the question arises as to how to properly wall plasterboard, so that they are really strong and reliable? Here specialists have one answer: to mount the material in two layers. When overlaying the second layer, the topsheets need to be shifted so that the places of their joints do not coincide with the joints of the bottom sheets. By the way, gypsum board is very easily cut, so making the necessary piece will not be difficult. So, how to wall plasterboard, it is already clear. The final stage is puttying joints, after which the new wall should be completely primed. Everything, the surface is ready for decoration.