How to put the tile in the bathroom by yourself? Simply and easily

We begin the long-awaited repair in the bathroom. To begin with, of course, we buy tiles. And then? And then we decide who will put this very tile - you or a person specially invited for these purposes. If you decide to do it yourself, the proper preparation for the process and compliance with technology will help you achieve an excellent result.

How to put a tile in the bathroom? Preparatory work

The most important condition is a properly prepared surface. The foundation for the tile should be perfectly even. If you are too lazy to level the walls with a putty, then you can easily use plywood or plasterboard. If you do not want to remove the old tile, then it is possible to lay a new layer on it as a base, but provided that there are no cracks and cracks in it. And if the old covering is not there, but the floor is flat, then it can be laid directly on the concrete.

How to put a tile in the bathroom? Step 1

After you have found out and chosen what will be the basis, clean the floor in the bathroom from various debris and dust. If the surface is uneven, use filler floors or leveling compounds. Base the alignment and check the result using the level. We try the tile, that is without glue we spread it in the necessary order on the floor and see how it lies, where it will be cut. Furniture and plumbing before this procedure is best removed or removed. The purpose of this layout is to see where the joints will be. You need to put it in such a way that in prominent places the tile should not be cut.

How to put a tile in the bathroom? Step 2

After the masonry is picked up, we do the marking. To do this, using a pencil, you need to draw an approximate tile layout on the floor, for this you need to find the central node of the layout and start from it to mark it off. In order not to get lost in the lines, you can pull the ropes.

How to put a tile in the bathroom? Step 3

Look, if the floor surface is cleaned of debris and dust, if yes, then you can proceed with the installation. For ceramic tiles you need special glue. Lubricate the base, about a square meter, starting from the center of the bathroom.

To spread the glue evenly, spread it with a special flat spatula. The material layer should be from three to five centimeters. Then glue applied to the substrate, it is necessary to draw a tooth-side of the spatula. The more tiles, the more waves you need to do. On this square meter of the substrate with glue, carefully put the tile and leave it for half an hour. Then we continue the process from the center to the edges.

To ensure that the tiles are the same distance, you can use spacers. Once you have laid all the material on the floor, it remains to report those parts where they need to be cut. To cut all the excess, you need to use a tile cutter. After the tiles have been laid, leave it for a while, as indicated in the instructions. Walk on the surface until completely dry it is impossible.

How to lay a tile in the bathroom? Step 4. Grout

It is different depending on the basis: on cement and epoxy. Usually use a grout of classic colors, but you can choose it under the color of the tiles. The solution is mixed with water according to the instructions and applied with a rubber spatula between the tiles. Next - remove the excess of a dampened sponge in the water. Wait for about half an hour and erase the remaining grout. In an hour, repeat the procedure. Remember, if any parts of the grout remain on the tile, then it will be very difficult for you to wipe it off afterwards.

As you can see, there is nothing complicated in this process. Do not know how to put the tile in the bathroom correctly ? You just need to know the technology of laying and properly prepare the foundation. And everything else is a matter of technique and your hands. Dare, try, you will succeed!