How to make furniture from cardboard for dolls: patterns, instructions

In the store there are a lot of varieties of houses for the Barbie doll, but, unfortunately, there are very few options with furniture, if there are such, then they only have a crib or a table. We decided to make furniture on our own using the schemes of furniture made of cardboard (for dolls). If you love creativity, practically with him on "you", then you can try your hand at making a house yourself, which will save your budget several times. Let's try using the article to answer the question about how to make furniture from cardboard for dolls.

Master in the living room a sofa made of cardboard

As in any house, in the first place is the living room, let's start furnishing it. The first thing we'll start with is a sofa. We need a pattern of furniture from cardboard for dolls, it can be prepared from ordinary white paper. Then cut out of thick corrugated cardboard in an amount of 1 pc. The bottom of the sofa is 10 x 20 cm. The back wall is also in the amount of 1 pc. Size 13 x 20 cm. Side backs in the amount of 2 pcs. The size of 1 piece is 8.5 x 10 cm. The blanks are ready, now you need to make the sofa soft and bring it closer to reality. For this we use foam rubber, the thickness is at your discretion, but remember, if it is thin, then parts need to cut out a few pieces and glue together. In the case of 1cm thick foam rubber, it will be enough to cut out 1 backrest and side parts, and 2-3 parts are better to the bottom. We circle the prepared preforms on the foam and cut it out, then we glue the foam and workpieces with any available PVA glue.

Upholstery sofa can be any (leather, suede, fabric), that is, you can just use what you have available. We are fitting with a normal cloth. Parties with foam rubber look inside, so they are given special attention.

After all the parts are ready, they must be glued together in one design, for this use the glue "Moment", or something else but a strong fixation.

Decorate the sofa with soft pillows and an extra seat. For this, from the foam rubber, cut out the parts equal to the bottom in the amount of 2 pieces. And sew a cover in the same size, insert foam through the hole and sew. By the same principle, make a back and pillows. From a piece of woolen cloth, make an extra for your doll a warm blanket. The sofa is ready, you can safely put it into your doll house.

Cardboard chair

We create a cardboard chair in the same way as a sofa. Quantity from 2 pieces. Take the dimensions of the patterns from the couch, the only thing you need is to reduce the length of the back and bottom of the sofa.

Master in the bedroom a bed of cardboard

No bedroom can not do without a bed. And in the children's house you need a cot for the doll. We make it from cardboard. For this, we prepare the patterns: the bottom is 26 x 18 cm, the side back is 9 x 8 x 18 cm. We cut out 1 piece from cardboard. We use a sidewall in the form of a trapezoid, you can fantasize to your taste or use a regular rectangle measuring 18 x 8 cm.

From the foam rubber cut into the bottom 3 parts of the same size, on the side 2 pieces. We glue foam rubber to the base of cardboard and we tighten it with a cloth. The legs for the bed are also made of cardboard. To do this, cut out 4 squares measuring 5 x 5 cm and about 1 cm from either side, make cuts at a distance of 0.5 cm from each other. Twist the square into a tube and bend the cut strips aside, use them to glue the leg to the bed. So do with all the legs. Make pillows for the bed, instead of the blanket you can use a piece of cloth. The cot for the doll is ready, put it in the bedroom, and you can put the doll to rest.

Master in the kitchen a chair made of cardboard

We continue the theme of how to make furniture from cardboard for dolls, and we decorate the doll house. In order to make a chair, you need a tight cardboard format A4. Prepare a schematic for the beginning and transfer it to the cardboard. Mark the folds. Go to pasting the workpiece stool material or skin and remember that on the back of the seams are hiding on the front side, and on the seat - on the purl. The chair for the doll is folded along the dotted lines, these places can be slightly bent before gluing. The seat is fixed with a glue of strong fixation. If desired, we decorate with ribbons or additional decorative materials.

Table for the kitchen of the doll house

What kind of kitchen without a table? We continue to make crafts made of cardboard. Furniture for dolls is made only of dense material.

For the table leg, you can use a cardboard sleeve. Or you can take ordinary cardboard and tightly twist it into the tube. We glue the workpiece with colored or white paper. Cut out the table top in the form of a circle and also pasted with colored paper. We connect with a glue gun a table top and a leg. We decorate the table with a tablecloth of pieces of material and, if desired, make napkins. The kitchen table is ready.

Cabinet made of cardboard in a house for dolls

Developing a theme, how to make furniture from a cardboard for dolls, we solve a problem with the scattered dresses and other things.

For work we will use a ready-made cardboard box. With the help of a clerical knife we remove the top and bottom valve, leaving only lateral ones, in the future they will serve as cabinet doors.

We glue the inside of the box with a suitable color, we can use self-adhesive wallpaper under the tree.

Prepare the templates for shelves and cut them out of cardboard. Dimensions are based on your box, measuring the height and width of the inside. To glue them you need the same color as the inside of the cabinet. We connect the shelf with a glue gun.

In the next section of the cabinet, glue a cocktail tube and make a hanger from the clips. Outside, the box can also be pasted with paper or painted. On one door, as an option with a mirror, you can glue a piece of foil. Fill the cupboard with things and install it in your house.

TV from cardboard

What kind of house without a TV? To create it, we need, as in all products, dense cardboard. We prepare two identical parts measuring 15 x 12 cm. We glue them together. For the effect of plasma, you can paste a cardboard TV with black tape. If this is not at hand, the usual black paper will do. We begin to glue all the lateral parts first, and then only the flat panels. A leg can be made from a normal cap from a felt-tip pen, we also decorate it with an adhesive tape.

As a stand, you can take two matchboxes and glue together, additionally cover with plain paper and only then decorate in the tone of the TV. Hot glue we fix the leg to the TV and to the basis of the matchboxes. Cut out from any children's magazine a beautiful picture, the size of a little less than the screen of the TV and glue it to the plasma. We place in the house and make your doll happy.

With the help of the article, we analyzed the main options for arranging a house of cardboard and answered the question of how to make furniture from cardboard for dolls.

On this basis, fantasize, come up with your options and please the children with new ideas.